Super ATV Replacement Z-Bend Tie Rod Kit

Fitment Note

• Does not fit the Teryx 4 S
• This replacement Z-bend tie rod kit is only for use with SuperATV's Kawasaki Teryx 6" Lift Kit.

Tie Rod End Features:

• 4130 Chromoly
• Heavy-duty design
• Precision blend of materials and heat treatment
• M14x1.5 threads

Tie Rod Features:

• 7/8" tubing
• Solid tube design
• Both bends reinforced with heavy duty 1/2" gussets
• Easy to adjust toe
• M14x1.5 threads
• Backed by a Lifetime Warranty

Kit Includes:

• Heavy-Duty Gusseted Tie Rods
• Heavy-Duty Tie Rod Ends
• Tie Rod Studs
• Inner Ball and Sockets
• Rubber Boots and Zip Ties
• All Hardware needed for Installation

At SuperATV, we want you to have the confidence that your machine is as tough as it looks. That’s why we’ve upgraded the steering components of our Kawasaki Teryx 6” Lift Kit. Our structurally improved tie rods are made of heavy-duty 7/8” solid tubing and have been reinforced with extra 1/2” gussets at each bend. We’ve over-engineered these to make them as indestructible as possible so you can ride hard on Kawasaki Teryx 6” Lift Kit without worrying about losing your steering. And thanks to the inner and outer threads being opposite, you can easily adjust your toe on the fly!

This kit also comes with our new heavy-duty tie rod ends. SuperATV specifically designed and engineered these tie rod ends to perform better, last longer, and work harder than your OEM tie rod end. We want you to be confident in these tie rod ends, that’s why we designed each tie rod end to utilize a monoball bearing style end that is pressed into the housing and then secured with a circlip. Each SuperATV tie rod end has increased size, improved functionality, and comes with an exceptional blend of 4130 Chromoly and heat treatment.

All of this backed by SuperATV’s Lifetime Warranty so you never have to by another tie rod kit again!

Tie Rod End Features:

• 4130 Chromoly steel
• Heavy-duty design
• Precision blend of materials and heat treatment
• M14x1.5 threads

Tie Rod Features:

• 3/4" diameter bar
• Made of solid chromoly steel
• Easy toe adjustment
• M14x1.5 threads
• Backed by a lifetime warranty

Complete Tie Rod Kit
SuperATV’s Polaris Ranger XP 800 Replacement Z-Bend Tie Rods give you the strength and reliability you need for your 6” SuperATV Lift Kit. This kit comes complete with everything you need including tie rods, inner and outer tie rod ends, rubber boots, and hardware. It’s a complete big lift tie rod replacement. 

Strong Enough for Big Lift Kits
We make our Z-Bend tie rods strong with 3/4” diameter solid chromoly steel bar and make them long enough to work with your lifted suspension. They’re designed to take the extra weight of your big lift kit and handle perfectly. We back our tie rods with a lifetime warranty so you can ride the way you want to.

Tie Rod End Features:

• 4130 Chromoly steel
• Heavy-duty design
• Precision blend of materials and heat treatment
• M14x1.5 threads

Tie Rod Features:

• 7/8" diameter bar
• Made with solid chromoly steel bar
• Reinforced with heavy-duty 1/2" gussets
• Easy toe adjustment
• M14x1.5 threads
• Backed by a lifetime warranty

Complete Tie Rod Kit
SuperATV’s Replacement Z-Bend Tie Rods for the Can-Am Defender are built to take your SuperATV Big Lift Kit wherever you want to go. This kit comes complete with everything you need including tie rods, inner and outer tie rod ends, rubber boots, zip ties and hardware. It's everything you need and it’s tough enough to make sure you stay in control.

Strong Enough for Big Lift Kits
We make our Z-Bend tie rods strong with 7/8” diameter solid chromoly steel bar and reinforce it with 1/2” gussets. They’re designed to take the extra weight of your big lift kit and handle perfectly. We back our tie rods with a lifetime warranty to make sure you aren’t afraid to push your machine to the limit.

Tie Rod End Features:

• 4130 Chromoly steel
• Heavy-duty design
• Precision blend of materials and heat treatment
• M14x1.5 threads

Tie Rod Features:

• 7/8" diameter bar
• Made with solid chromoly steel bar
• Reinforced with heavy-duty 1/2" gussets
• Easy toe adjustment
• M14x1.5 threads
• Backed by a lifetime warranty

Complete Tie Rod Kit
SuperATV’s Polaris Ranger Replacement Z-Bend Tie Rods for the Polaris Ranger 1000 give you the strength and reliability you need on your SuperATV Big Lift Kit. This kit comes complete with everything you need including tie rods, inner and outer tie rod ends, rubber boots, zip ties, and hardware. It’s everything you need to get your big lift kit rolling.

Strong Enough for Big Lift Kits
We make our Z-Bend tie rods strong with 7/8” diameter solid chromoly steel bar and reinforce it with 1/2” gussets. They’re designed to take the extra weight of your big lift kit and handle perfectly. We back our tie rods with a lifetime warranty to make sure you aren’t afraid to push your machine to the limit.

Fitment Note

• This replacement Z-bend tie rod kit is only for use with SuperATV's Polaris RZR XP 1000 7-10" Lift Kit.

Tie Rod End Features:

• 4130 Chromoly steel
• Heavy-duty design
• Precision blend of materials and heat treatment
• M14x1.5 threads

Tie Rod Features:

• 7/8" tubing
• Solid tube design
• Both bends reinforced with heavy-duty 1/2" gussets
• Easy to adjust toe
• M14x1.5 threads
• Backed by a lifetime warranty

Kit Includes:

• Heavy-duty gusseted tie rods
• Heavy-duty tie rod ends
• Tie rod studs
• Inner ball and sockets
• Rubber boots and zip ties
• All hardware needed for installation

Polaris RZR XP 1000 Z-Bend Tie Rod Kit - Replacement for SuperATV Lift Kits
At SuperATV, we want you to have the confidence that your machine is as tough as it looks. That’s why we’ve upgraded the steering components of our Polaris RZR XP 1000 7-10” Lift Kit. Our structurally improved tie rods are made of heavy-duty 7/8” solid tubing and have been reinforced with extra 1/2” gussets at each bend. We’ve over-engineered these to make them as indestructible as possible so you can ride hard on your Polaris RZR XP 1000 7-10” Lift Kit without worrying about losing your steering. And thanks to the inner and outer threads being opposite, you can easily adjust your toe on the fly!

This kit also comes with our new heavy-duty tie rod ends. SuperATV specifically designed and engineered these tie rod ends to perform better, last longer, and work harder than your OEM tie rod end. We want you to be confident in these tie rod ends, that’s why we designed each tie rod end to utilize a monoball bearing style end that is pressed into the housing and then secured with a circlip. Each SuperATV tie rod end has increased size, improved functionality, and comes with an exceptional blend of 4130 Chromoly and heat treatment.

All of this backed by SuperATV’s Lifetime Warranty so you never have to by another tie rod kit again!

Tie Rod End Features:

• 4130 Chromoly steel
• Heavy-duty design
• Precision blend of materials and heat treatment
• M14x1.5 threads

Tie Rod Features:

• 7/8" diameter bar
• Made of solid chromoly steel
• Reinforced with heavy-duty 1/2" gussets
• Easy toe adjustment
• M14x1.5 threads
• Backed by a lifetime warranty

Complete Tie Rod Kit
SuperATV’s Polaris Ranger XP 900 Replacement Z-Bend Tie Rods for the Polaris Ranger give you the strength and reliability you need on your SuperATV Big Lift Kit. This kit comes complete with everything you need including tie rods, inner and outer tie rod ends, rubber boots, and hardware. It’s a complete big lift tie rod replacement.

Strong Enough for Big Lift Kits
We make our Z-Bend tie rods strong with 7/8” diameter solid chromoly steel bar and reinforce it with 1/2” gussets. They’re designed to take the extra weight of your big lift kit and handle perfectly. We back our tie rods with a lifetime warranty to make sure you aren’t afraid to push your machine to the limit.

Please Note

• This replacement Z-bend tie rod kit is only for use with SuperATV's Polaris RZR S 900 7-10" Lift Kit.

Tie Rod End Features:

• 4130 Chromoly steel
• Heavy-duty design
• Precision blend of materials and heat treatment
• M14x1.5 threads

Tie Rod Features:

• 7/8" tubing
• Solid tube design
• Both bends reinforced with heavy-duty 1/2" gussets
• Easy to adjust toe
• M14x1.5 threads
• Backed by a lifetime warranty

Kit Includes:

• Heavy-Duty Gusseted Tie Rods
• Heavy-Duty Tie Rod Ends
• Tie Rod Studs
• Inner Ball and Sockets
• Rubber Boots and Zip Ties
• All Hardware needed for Installation

Polaris RZR S 900 Tie Rod Kit - Replacement for SuperATV Lift Kits
At SuperATV, we want you to have the confidence that your machine is as tough as it looks. That’s why we’ve upgraded the steering components of our Polaris RZR S 900 7-10” Lift Kit. Our structurally improved tie rods are made of heavy-duty 7/8” solid tubing and have been reinforced with extra 1/2” gussets at each bend. We’ve over-engineered these to make them as indestructible as possible so you can ride hard on your Polaris RZR S 900 7-10” Lift Kit without worrying about losing your steering. And thanks to the inner and outer threads being opposite, you can easily adjust your toe on the fly!

This kit also comes with our new heavy-duty tie rod ends. SuperATV specifically designed and engineered these tie rod ends to perform better, last longer, and work harder than your OEM tie rod end. We want you to be confident in these tie rod ends, that’s why we designed each tie rod end to utilize a monoball bearing style end that is pressed into the housing and then secured with a circlip. Each SuperATV tie rod end has increased size, improved functionality, and comes with an exceptional blend of 4130 Chromoly and heat treatment.

All of this backed by SuperATV’s Lifetime Warranty so you never have to by another tie rod kit again!

Tie Rod End Features:

• 4130 Chromoly steel
• Heavy-duty design
• Precision blend of materials and heat treatment
• M14x1.5 threads

Tie Rod Features:

• 7/8" diameter bar
• Made of solid steel
• Reinforced with heavy-duty 1/2" gussets
• Easy toe adjustment
• M14x1.5 threads
• Backed by a lifetime warranty

Complete Tie Rod Kit
Hey, don’t feel bad. We’ve all made bad rider errors and snapped some key suspension part. So if you wadded up the tie rod kit on your Yamaha Viking 4” Lift Kit, don’t worry, you’re on the right page.

SuperATV’s Replacement Z-Bend Tie Rod Kit lets you rebuild your machine and take back control. You get the strength and reliability you need on your SuperATV Big Lift Kit. This kit comes complete with everything you need including tie rods, inner and outer tie rod ends, rubber boots, and hardware. It’s a complete big lift tie rod replacement.

Strong Enough for Big Lift Kits
We make our Z-Bend tie rods strong with 7/8” diameter solid steel bar and reinforce it with 1/2” gussets. They’re designed to take the extra weight of your big lift kit and handle perfectly. We back our tie rods with a lifetime warranty to make sure you aren’t afraid to push your machine to the limit.

Tie Rod End Features:

• 4130 Chromoly steel
• Heavy-duty design
• Precision blend of materials and heat treatment
• M14x1.5 threads

Tie Rod Features:

• 7/8" diameter bar
• Made with solid chromoly steel bar
• Reinforced with heavy-duty 1/2" gussets
• Easy toe adjustment
• M14x1.5 threads
• Backed by a lifetime warranty

Complete Tie Rod Kit
Get SuperATV’s Replacement Z-Bend Tie Rods for the Can-Am Maverick X3 and get the strength and reliability you need for your SuperATV Big Lift Kit. This kit comes complete with everything you need including tie rods, inner and outer tie rod ends, rubber boots, zip ties, and hardware. It’s the strength and components you need to stay in control.

Strong Enough for Big Lift Kits
We make our Z-Bend tie rods strong with 7/8” diameter solid chromoly steel bar and reinforce it with 1/2” gussets. They’re designed to take the extra weight of your big lift kit and handle perfectly. We back our tie rods with a lifetime warranty to make sure you aren’t afraid to push your machine to the limit.

Please Note

• This replacement Z-bend tie rod kit is only for use with SuperATV’s Can-Am Maverick 6” lift kit.

Tie Rod End Features:

• 4130 Chromoly steel
• Heavy-duty design
• Precision blend of materials and heat treatment
• M14x1.5 threads

Tie Rod Features:

• 7/8" Tubing
• Solid Tube Design
• Both bends reinforced with heavy-duty 1/2" gussets
• Easy to adjust toe
• M14x1.5 threads
• Backed by a Lifetime Warranty

Kit Includes:

• Heavy-duty gusseted tie rods
• Heavy-duty tie rod ends
• Tie rod studs
• Inner ball and sockets
• Rubber boots and zip ries
• All hardware needed for Installation

At SuperATV, we want you to have the confidence that your machine is as tough as it looks. That’s why we’ve upgraded the steering components of our Can-Am Maverick 6” Lift Kit. Our structurally improved tie rods are made of heavy-duty 7/8” solid tubing and have been reinforced with extra 1/2” gussets at each bend. We’ve over-engineered these to make them as indestructible as possible so you can ride hard on Can-Am Maverick 6” Lift Kit without worrying about losing your steering. And thanks to the inner and outer threads being opposite, you can easily adjust your toe on the fly!

This kit also comes with our new heavy-duty tie rod ends. SuperATV specifically designed and engineered these tie rod ends to perform better, last longer, and work harder than your OEM tie rod end. We want you to be confident in these tie rod ends, that’s why we designed each tie rod end to utilize a monoball bearing style end that is pressed into the housing and then secured with a circlip. Each SuperATV tie rod end has increased size, improved functionality, and comes with an exceptional blend of 4130 Chromoly and heat treatment.

All of this backed by SuperATV’s Lifetime Warranty so you never have to by another tie rod kit again!

Fitment

• Can-Am Commander 800 (11-20)
• Can-Am Commander 1000 (11-20)
• Can-Am Commander 800 Max (16-20)
• Can-Am Commander 1000 Max (14-20)

Fitment Note

• This tie rod kit is for use with SuperATV's Commander 6" Lift Kit.

Tie Rod End Features:

• 4130 Chromoly
• Heavy-duty design
• Precision blend of materials and heat treatment
• M14x1.5 threads
• Includes M14 and M16 inner ball and sockets to fit any year model

Tie Rod Features:

• Made with 7/8" diameter solid chromoly steel bar
• Reinforced with heavy-duty 1/2" gussets
• Easy toe adjustment
• M14x1.5 threads
• Backed by a lifetime warranty

Complete Tie Rod Kit
SuperATV’s Replacement Z-Bend Tie Rods for the Can-Am Commander give you long lasting strength to take your SuperATV Big Lift Kit wherever you want to go. This kit comes complete with everything you need including tie rods, inner and outer tie rod ends, rubber boots, zip ties, and hardware. It’s everything you need to get your big lift kit rolling.

Strong Enough for Big Lift Kits
We make our Z-Bend tie rods strong with a 7/8” diameter solid chromoly steel bar and reinforce it with 1/2” gussets. They’re designed to take the extra weight of your big lift kit and handle perfectly. We back our tie rods with a lifetime warranty to make sure you aren’t afraid to push your machine to the limit.