My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Available Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
All Balls Snowmobile Drive-Train Bearng & Seal Kits contain all of the bearings,seals,O-rings and misc. parts needed to refresh your Driveshaft or Jackshaft in one convenient package.All bearings are an ABEC 3 level precision hi-speed bearings filled with Kyodo-Yoshi PS2 low temp grease,sealed using low drag double lip seals to provide superior performance in all weather conditions. Type TC Nitrile Elastomer seals are also included with each kit, designed to keep the water and dirt out and provide an optioum seal.
Technical Specifications
- MFG. Part Number 14-1001
Vehicle Information
Ski-Doo Legend 550 Snowmobile (2004)
The 2004 Ski-Doo Legend 550 was a popular snowmobile, known for its reliability. This model featured a 553.4cc (or 553cc) two-stroke, fan-cooled engine, rated at approximately 60 horsepower. For the 2004 model year, Ski-Doo offered two main trims: the Legend 550 Fan, designed for trail riding, and the Legend GT Fan 550, a touring-oriented model. Both the 2004 Legend 550 Fan and the Legend GT Fan 550 were "Carryover" models, meaning they continued from previous years without significant mid-cycle generation or engine changes for 2004. The Legend GT Fan 550 was introduced in 2001, and the Legend 550 Fan in 2002, with the Rotax 550 Fan engine remaining consistent across these models. FAQ:
Q: How do I know if this part fits my Ski-Doo Legend 550?
A: Please use our year and trim selector at the top of the page to confirm compatibility for your specific model and year.
Maintenance
| Component | Interval | Details |
| Injection Oil (reservoir) | Before every ride | Check level and refill as needed. Running out of injection oil can cause severe engine damage. |
| Drive Belt | Before every ride (inspection) | Inspect for wear (cracks, fraying, flat spots). Replace if worn. Estimated lifespan between 2,400 and 4,800 km, or replace at the start of each season. |
| Spark Plugs | Annually or before each season | Replace for consistent reliability. More frequent if heavy use. |
| Air Filter | Inspect every 8,000 to 9,600 km | Clean or replace depending on riding conditions. More frequent in dusty environments. |
| Coolant | Every 2 to 5 years | Check level regularly. Replace according to recommended interval. |
| Brake Fluid | Every 2 years | Check level and condition. Replace according to recommended interval. |