All Balls Tie Rod End Kit, 2 Kits Required Per Vehicle
1020-7424 (MFG #: 51-1011)
$98.69
Sale price
$98.69
Regular price
$98.69
Skip to product information
All Balls Tie Rod End Kit, 2 Kits Required Per Vehicle for KYMCO Maxxer 250 ATV
All Balls Tie Rod End Kit, 2 Kits Required Per Vehicle for KYMCO Maxxer 250 ATV
$98.69
Sale price
$98.69
Regular price
$98.69
SKU:1020-7424
My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Available Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
FEATURES
- Heavy duty
- Each kit contains two tie rod ends
- One left hand thread and one right hand thread along with the Cotter Pins and jam nuts
- Kit includes all parts needed to do the job right
Technical Specifications
- MFG. Part Number 51-1011
Vehicle Information
KYMCO Maxxer 250 ATV (2008)
The 2008 KYMCO Maxxer 250 is an ATV (all-terrain vehicle) equipped with a 249 cm³ engine, delivering 17 horsepower. This model was part of the Maxxer series, which began production in late 2005. For the 2008 model year, the primary designation identified was the Maxxer 250 SE EURO II, likely indicating a specific version or trim level related to emissions standards. No other distinct trim levels were widely offered for the Maxxer 250 in 2008. Importantly, no significant mid-cycle generation or engine changes were reported for the KYMCO Maxxer 250 around the 2008 model year. Its engine specifications remained consistent from 2009 through 2017, suggesting a stable design during this period. FAQ:
Q: How can I ensure this part fits my KYMCO Maxxer 250?
A: Please use the year and edition selector at the top of the page to confirm compatibility for your specific model.
Maintenance
| Component | Interval | Details |
| Engine Oil and Oil Filter | Initial at 300 km; then every 1,000 km | Clean oil filter screen at 1,000 km, 2,000 km, and 3,000 km. Replace screen at 3,000 km. |
| Air Filter | Cleaning every 300 km; replacement at 1,000 km and 2,000 km | Clean or replace more frequently in dusty conditions. |
| Spark Plug | Inspection at 1,000 km, 2,000 km, and 3,000 km; replacement at 3,000 km | Recommended gap is 0.6-0.7 mm. |
| Belt (CVT models) | Inspection every 100 hours | Replace if damage is found. |
| Coolant | Replacement every 200 hours or 2 years | Inspect cooling system annually. |
The intervals below are general guidelines. For the most accurate maintenance schedule, please refer to the official owner's manual for your 2008 KYMCO Maxxer 250.