All Balls Wheel Spacer Kit
1004-3035 (MFG #: 11-1103-1)
$52.65
Sale price
$52.65
Regular price
$52.65
Skip to product information
All Balls Wheel Spacer Kit for Husqvarna TX 300 Dirt Bike
All Balls Wheel Spacer Kit for Husqvarna TX 300 Dirt Bike
$52.65
Sale price
$52.65
Regular price
$52.65
SKU:1004-3035
My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Available Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
FEATURES
- Water and dirt grind between wheel bearing seals and soft OEM aluminum wheel spacers; this creates grooves and allows for bearing contamination
- This makes for a tight seal that will last for years and keep your bearings fresh
- Replace or upgrade OEM wheel spacers with these durable replacements
- Kits come with required amount of spacers per application
- Feature hardened steel contact surfaces
Technical Specifications
- MFG. Part Number 11-1103-1
Vehicle Information
Husqvarna TX 300 Dirt Bike (2017-2026)
The Husqvarna TX 300, a prominent off-road racing motorcycle, has seen significant evolution from 2017 to 2026. Designed for closed-course competition, it is powered by a single-cylinder, two-stroke engine with a consistent displacement of 293.2 cc throughout this period. Significant changes have marked its evolution. Initially carbureted (TX 300) from 2017 to 2019, it transitioned to electronic fuel injection (TX 300i) in 2020. A new generation was introduced in 2023, featuring a redesigned engine for Throttle Body Injection (TBI) and a new frame. In 2025, a lighter frame and revised WP suspension settings were added, alongside the introduction of the "Heritage" model. Q: Is this product compatible with my Husqvarna TX 300?
R: To confirm exact compatibility, please use the year and edition selector on this page.
Maintenance
| Component | Interval | Details |
| Engine Oil and Oil Filter | Every 5 to 10 operating hours | Replace oil and filter every 5 hours for aggressive/race riding, or every 10 hours for recreational riding. |
| Air Filter | Every 2 to 15 operating hours | Inspect after every ride. Clean every 2-5 hours (aggressive/race) or 10-15 hours (recreational). Replace if damaged or heavily soiled. |
| Spark Plug | Inspect every 10 to 15 hours | Replace as needed. |
| Drive Chain and Sprockets | Regularly | Clean, lubricate, and inspect tension (20-30 mm slack) and wear. |
| Coolant | Check regularly | Replace as per owner's manual recommendations. |
Maintenance intervals may vary by model year and riding conditions. Always consult the official owner's manual for your specific model.