ATS Razor Twin 4" Carbides
ATS6-130 (MFG #: ATS6-130)
$62.99
Sale price
$62.99
Regular price
$62.99
Skip to product information
ATS Razor Twin 4" Carbides for Polaris IQ 440 Snowmobile
ATS Razor Twin 4" Carbides for Polaris IQ 440 Snowmobile
$62.99
Sale price
$62.99
Regular price
$62.99
SKU:ATS6-130
My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Available Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
Designed not only for truer tracking on rutted trails, but also for easier steering in the turns. Thedesign features Power Rail on the outer runner for more power to carve the turns, and a GuideRail on the inner runner to maintain truer tracking, and at the same time to make it easier forthe driver to turn. 2 are required per machine! These runners are sold each.4" 90 degree carbide.
Technical Specifications
- MFG. Part Number ATS6-130
Vehicle Information
Polaris IQ 440 Snowmobile (2005-2007)
The Polaris IQ 440, produced from 2005 to 2007, was primarily a race-specific snowmobile built on the IQ chassis. Known for its robust performance, it was often referred to as the "IQ 440 Racer" or "IQ R Prox X 440". All models from 2005 to 2007 were powered by a liquid-cooled Polaris Liberty 440 twin engine, consistently featuring a 440cc displacement. This high-compression engine was designed to run on 110 octane fuel. While there were no major generation breaks or conventional "trims" like consumer models, significant improvements were made across the years. The 2005 model introduced an all-new crankcase, oversized intakes, and a Polaris Dragon ignition system. For 2007, Polaris focused on enhancing chassis durability with a reinforced front clip and rear close-off, a new stronger belt, a new lower chaincase bearing, and adjustments to the Independent Front Suspension (IFS) geometry for improved handling. The engine received modest tuning changes but was not dramatically altered. FAQ:
Q: How can I ensure this part fits my Polaris IQ 440?
R: Please use the year and model selector at the top of the page to confirm exact compatibility.
Maintenance
| Component | Interval | Details |
| General Inspection | Every 240 km, 800 km, 1600 km, then every 1600 km | Recommended by a qualified technician. |
| Oil Filter | Every 12 months, 200 hours, or 3200 km (whichever comes first) | Initial change at 25 hours or 1 month. |
| Drive Belt | Inspect before every ride. Replace as needed every 12 months, 200 hours, or 3200 km | More frequent inspection recommended every 50 hours or 800 km. |
| Spark Plug | Inspect and replace as needed every 12 months, 200 hours, or 3200 km | |
| Air Filter | Inspect and clean before every ride. Replace as needed every 12 months, 200 hours, or 3200 km | Initial inspection and replacement if necessary at 25 hours or 1 month. |
| Coolant | Check level before every ride. Flush system every 8000 km or 5 years | Inspect for leaks and strength seasonally. Replace parts as needed every 12 months, 200 hours, or 3200 km. |
The maintenance intervals below are based on general Polaris guidelines for snowmobiles of this era. For absolute accuracy, please consult your model's official owner's manual. For severe use (e.g., mud, water, high RPMs), intervals should be reduced by 50%.