ATS Standard Steel Runners
015-015 (MFG #: 1500)
$20.99
Sale price
$20.99
Regular price
$20.99
Skip to product information
ATS Standard Steel Runners for Moto-Ski Mirage 277 Snowmobile
ATS Standard Steel Runners for Moto-Ski Mirage 277 Snowmobile
$20.99
Sale price
$20.99
Regular price
$20.99
SKU:015-015
My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Available Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
Replacements runner carbides. Sold in pairs. (Except for 015-108 (Manufacturer Part Number: 1460) it is sold as a single)
Technical Specifications
- MFG. Part Number 1500
Vehicle Information
Moto-Ski Mirage 277 Snowmobile (1980-1983)
The Moto-Ski Mirage series, produced from 1980 to 1983, was a popular line of snowmobiles known for its economical operation and nimble performance. During this period, Moto-Ski, owned by Bombardier, often shared components and reliable Rotax engines with Ski-Doo models. The Mirage 277 specifically featured the fan-cooled Rotax 277 single-cylinder engine, with a displacement of 269cc. While there were no distinct mid-cycle generation changes in the traditional sense for the Moto-Ski Mirage between 1980 and 1983, variations primarily involved different trims offering diverse engine options. The Mirage I consistently utilized the 269cc Rotax 277 engine. Other trims like the Mirage Special offered a more powerful 377cc Rotax engine, sometimes with twin carburetors, while the Mirage II and IIE introduced a 368cc engine option in 1982-1983. These differences allowed for a range of performance characteristics within the same platform. FAQ:
Q: How do I know which Moto-Ski Mirage 277 parts fit my snowmobile?
A: To ensure perfect compatibility, please use the year and model selector at the top of this page. This will filter parts specifically for your Moto-Ski Mirage 277.
Maintenance
| Component | Interval | Details |
| Engine Oil Filter | Not applicable | The Rotax 277 is a two-stroke engine using a pre-mixed fuel and oil system for lubrication, so there is no traditional engine oil filter. |
| Chaincase Oil | Check level regularly. Change annually or every 2 years or 6,000 km. | Check level by removing the oil level cap plug; oil should be level with the bottom of the orifice. Capacity approximately 200 ml. Change oil at the end of the season to prevent moisture accumulation. Lubricate drive chain every 25 hours with approximately 300 ml of Moto-Ski Special Grease. |
| Drive Belt | Inspect every 50 hours. Replace as needed, typically between 2,400 and 4,800 km. | Regularly check the condition of the drive belt for cracks, fraying, or uneven wear. Replace if its width is less than 2.5 cm. |
| Spark Plug | Clean every 10 hours. Inspect every 12.5 hours. Replace every 25 hours or before each season. | Recommended type: NGK B8ES or equivalent, with an electrode gap of 0.4-0.5 mm. Clean heavy oil deposits to prevent engine issues. |
| Air Filter | Inspect every 25-50 hours. Clean and oil more frequently if operating in dusty conditions. | Replace as needed. Some recommendations suggest cleaning every 2,500-3,000 km under severe conditions. |
| Coolant | Not applicable | The Rotax 277 engine is fan-cooled and does not use liquid coolant. |
| General Lubrication and Inspections | Every 25 hours and every 40 hours or monthly. | Lubricate drive chain, front axle, and driven pulley every 25 hours. Lubricate steering system and suspension every 40 hours or monthly (more often in wet/severe conditions). Perform pre-season preparation. |
The maintenance intervals below are compiled from various sources. For optimal accuracy, always refer to the official owner's manual for your specific model.