ATS Trailblaster 200 Runners for Moto-Ski Futura 377 Snowmobile
ATS Trailblaster 200 Runners for Moto-Ski Futura 377 Snowmobile
My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Available Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
Replacements runner carbides. 6" 60 degree carbide on 7/16" bar with (2) 1" wear pads and hard weld filler. Use: Average trail riding, no studs. Sold in pairs.
Technical Specifications
- MFG. Part Number ATS2-115
Vehicle Information
Moto-Ski Futura 377 Snowmobile (1982-1983)
The Moto-Ski Futura 377, primarily known as the Moto-Ski Futura 300, is an iconic snowmobile model produced from 1982 to 1983. Recognized for its reliability, this model was powered by a robust 368.3 cc Rotax 377 fan-cooled twin engine, delivering 35 horsepower at 6500 rpm. This engine featured piston ports, a pneumatic pump pressurized fuel system, and was lubricated by premixed fuel and oil. It also incorporated a 12-volt Bosch Flywheel Magneto Generator ignition system and a 36 mm Bing double float carburetor. Throughout the 1982 and 1983 model years, the Futura 377 experienced no significant generation breaks, nor major engine or trim changes. The model remained stable, without substantial revisions to its core design, offering a consistent experience to riders. FAQ:
Q: Is this product compatible with my Moto-Ski Futura 377?
A: To ensure perfect compatibility with your snowmobile, please use the year and edition selector located at the top of this page.
Maintenance
| Component | Interval | Details |
| Drive Belt | Check every 50 hours; replace every 2,400 to 4,800 km or annually | Visually inspect before each ride for cracks, fraying, or uneven wear. Replace if width is less than 2.5 cm. |
| Spark Plug | Replace every 50 to 100 hours or annually | Inspect more frequently (25 to 40 hours) for aggressive riding. Ensure proper gap. |
| Air Filter | Check and clean regularly | Frequency depends on riding conditions (more often in dusty environments). Clean and oil foam filters if applicable. Inspect for dirt buildup. |
| Coolant | Check level before each ride; replace annually or every 2 years | Use a 50/50 mixture of water and antifreeze. Ensure the level is adequate and top up if necessary. |