Camso Cobra WT Track
20x154x1.80 / 2.86" / Single ply, Fully clipped
$1,836.99
Sale price
$1,836.99
Regular price
$1,836.99
Skip to product information
Camso Cobra WT Track for Lynx Brutal RE 850 Snowmobile
Camso Cobra WT Track for Lynx Brutal RE 850 Snowmobile
$1,836.99
Sale price
$1,836.99
Regular price
$1,836.99
SKU:04-6799195
My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Available Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
Wide-track design for performance with traction to spare in deep, soft or loose snow. Ideal for utility snowmobiles used off-trail with high-performance belting to handle heavier loads without track stretching.
Features
- Extra-high 1.5” and 1.8” lugs for the best possible traction
- Cupped lug design ideal in soft, loose snow and for off-trail backcountry exploration
- Lightweight for greater efficiency and improved fuel economy
Please Note
Not all tracks can be installed on all sleds withoutmodification. The listings in theapplication chart fit OEM suspension, track width, length, and drive pitchonly. To determine if an optional trackis compatible with a particular snowmobile, you must check the bulkhead,tunnel, heat exchanger, and suspension wheel positioning for properclearance.
Technical Specifications
- MFG. Part Number 9195U
Vehicle Information
Lynx Brutal RE 850 Snowmobile (2025-2026)
The Lynx Brutal RE 850 for the 2025 and 2026 model years offers a powerful and versatile experience for snowmobile enthusiasts. Powered by the Rotax 850 E-TEC engine, with 849 cc and approximately 165 horsepower, it is designed for performance. This liquid-cooled, two-stroke engine features electronic direct injection with additional booster injectors and a maximum engine speed of 7900 RPM. The model is often specified with a 500 mm (20-inch) track. The 2026 model brings significant updates, marking a notable mid-cycle refresh. It transitions to the more modern Radien² platform, offering improved ergonomics and a fresh design. New features include a fourth engine mount for constant engine alignment, a four-piston Brembo brake caliper, narrower running boards for more efficient snow evacuation, an innovative fold-down snow guard, premium LED headlights, and a 10.25-inch touchscreen display with built-in GPS as standard. The 2025 model offered a 7.2-inch digital gauge or an optional 10.25-inch touchscreen. Q: Is this product compatible with my 2025 or 2026 Lynx Brutal RE 850?
A: To confirm exact compatibility, please use our year and edition selector on this page.
Maintenance
| Component | Interval | Details |
| Oil Filter (4-stroke engines) | Not applicable to 2-stroke E-TEC engines | Check injection oil level before every ride. |
| Drive Belt | Inspect every 50 hours. Replace every 2 400 to 4 800 km. | Start each season with a fresh belt. Clean clutch faces annually or if performance degrades. |
| Spark Plugs | Inspect every 50 hours or 6 400 km or 12 months. | Replace as recommended for E-TEC engines. |
| Air Filter | Inspect weekly, replace as needed. | Pre-filter should be inspected and cleaned often, and replaced as needed. |
| Coolant | Check before every ride. Change every two years. | Level should be checked when cold. Use a 50% antifreeze / 50% water mixture. |
| Chaincase Oil | Check pre-season and every 50 hours. Change annually or at end of season. |
The maintenance intervals below are general guidelines. For specific requirements tailored to your 2025 or 2026 Lynx Brutal RE 850, please consult the official owner's manual.