My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Available Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
Nailed to the trail A highly aggressive trail model design featuring hundreds of sharp-tip lug studs, giving riders traction and control they can count on.
FEATURES
- Factory pre-studded for improved traction and control
- Lug design delivers better traction than the ICE Ripper XT
- 1.375" lug height provides better handling and stability
- Optimized rubber compound for superior traction on groomed trail
Please Note
Not all tracks can be installed on all sleds withoutmodification. The listings in theapplication chart fit OEM suspension, track width, length, and drive pitchonly. To determine if an optional trackis compatible with a particular snowmobile, you must check the bulkhead,tunnel, heat exchanger, and suspension wheel positioning for proper clearance.
Technical Specifications
- MFG. Part Number 9029H
Vehicle Information
Arctic Cat Z 120 Snowmobile (2000-2001)
The Arctic Cat Z 120 snowmobile, offered for the 2000 and 2001 model years, was designed as an entry-level machine for young riders. It was equipped with a 119cc fan-cooled Suzuki engine, providing manageable power focused on safety and control. For the 2000 model year, the primary trim offered was the standard Arctic Cat Z 120. In 2001, Arctic Cat introduced the Z 120 Sno Pro trim in addition to the standard model. The engine and platform remained consistent between 2000 and 2001, with no major generation changes. Q : How can I ensure this part fits my Arctic Cat Z 120? R : For guaranteed compatibility, please use our year and model selector at the top of the page.
Maintenance
| Component | Interval | Details |
| Engine Oil | After the first 10 hours of operation (break-in); annually or seasonally; check and replenish at the beginning and mid-season. | For 4-stroke models, change engine oil during storage preparation. |
| Oil Filter | With every engine oil change. | |
| Drive Belt | Inspect regularly; replace if damaged or worn. | Check adjustment after 30 minutes of operation if a new belt is installed. |
| Spark Plug | Inspect after 150 km (break-in); clean, gap, or replace as necessary; during storage preparation. | For storage, disconnect and remove the spark plug, pour approximately 10 ml of petroleum-based oil into the hole, slowly pull the recoil starter about five times before reinstalling. |
| Air Filter | Clean during storage preparation; inspect more frequently if operated in dusty, wet, or muddy conditions. |