Dynojet ATV/UTV Belt Temp Sensor (for Power Vision III)
PT01000212 (MFG #: 96080002)
$562.99
Sale price
$562.99
Regular price
$562.99
Skip to product information
Dynojet ATV/UTV Belt Temp Sensor (for Power Vision III) for Polaris Scrambler 1000 ATV
Dynojet ATV/UTV Belt Temp Sensor (for Power Vision III) for Polaris Scrambler 1000 ATV
$562.99
Sale price
$562.99
Regular price
$562.99
SKU:PT01000212
My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Available Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
Keep an eye on your Belt Temperature with the sleek and innovative Dynojet Belt Temperature sensor kit. Featuring easy plug and play connections and a durable sensor, never second guess the status of your CVT system.
The stock belt temp sensor reads ambient temperature of the area within the clutch cover and not the actual temperature of the belt. By the time the stock sensor reads a HIGH temperature your stock belt has already exceeded its useable range. When the Dynojet infrared sensor has reached peak useable range of 225F the stock sensor will only be reading just over half on the stock gauge.
Dynojet has engineered a plug and play solution to integrate belt temperature directly onto your Power Vision 3 device as a selectable gauge channel. The temperature reading can also be logged for review later after a day’s ride. Only interfaces with the Power Vision 3 to add the temperature channel onto the display.
FEATURES
- Get accurate belt temperature, not just ambient temperature like the stock sensor reports
- Belt temp sensor and PV3 link, allow for red screen alert based on belt temperature
- Sleek design is unintrusive and easy to install
- Help monitor belt temperatures as excessive heat is generated to avoid premature belt degradation
- Durable AL housing
- Plug and Play connections to your PV3 w/ high quality connectors and no wire tapping
Technical Specifications
- MFG. Part Number 96080002
Vehicle Information
Polaris Scrambler 1000 ATV (2014-2026)
The Polaris Scrambler 1000 series, spanning from 2014 to 2026, is a high-performance ATV known for its powerful 952cc ProStar 4-stroke SOHC twin-cylinder engine, consistently delivering 89 horsepower across all models. It has been a flagship performance model throughout its production. A significant evolution occurred in 2020 with the introduction of the Scrambler XP 1000 S. While maintaining the same engine, this "S" model featured a completely new, stronger chassis, advanced Walker Evans adjustable suspension, and a more robust drivetrain derived from the RZR XP 1000. It also brought technological enhancements like selectable throttle modes. Prior to 2020, the Scrambler XP 1000 was the primary high-performance trim. Q: How do I ensure this part fits my specific Scrambler 1000?
A: Please use the year and edition selector at the top of the page to confirm compatibility for your exact model.
Maintenance
| Component | Interval | Details |
| Engine Oil and Filter | 25 hours (initial break-in) | Change engine oil and filter. |
| Front Gearcase Fluid | 25 hours (initial break-in) | Initial fluid level inspection. |
| Transmission Fluid | 25 hours (initial break-in) | Initial fluid level inspection; inspect for fluid leaks; add lubricant if needed. |
| General Inspection | 25 hours (initial break-in) | Careful treatment of a new engine and drive components is recommended for efficient performance and longer life. |
| Engine Oil and Filter | Every 50 hours or 1,600 km or yearly | Change engine oil and filter. |
| Air Filter | Every 50 hours or 1,600 km or yearly | Inspect and clean; replace as necessary. Ensure proper installation of the filter and airbox cover. Inspect ducts and screens and clean as necessary. |
| Drive Belt | Every 50 hours or 1,600 km or yearly | Inspect and replace as needed. |
| Coolant | Every 50 hours or 1,600 km or yearly | Inspect fluid level and inspect for leaks; add coolant if needed. Inspect coolant strength seasonally and pressure test the system yearly. |
| Spark Arrestor | Every 50 hours or 1,600 km or yearly | Clean out. |
| Front Gearcase Fluid | Every 50 hours or 1,600 km or yearly | Change fluid. |
| Transmission Fluid | Every 50 hours or 1,600 km or yearly | Change fluid. |
| Spark Plugs | Every 3,200 km or 2 years | Inspect and replace as needed. |
| Coolant System Flush | Every 8,000 km or 5 years |
Maintenance intervals may vary slightly by year and exact model. Always consult your vehicle's official owner's manual. For severe use, halve the intervals.