EBC Standard Brake Shoes
1030-9583 (MFG #: 609)
$87.99
Sale price
$87.99
Regular price
$87.99
Skip to product information
EBC Standard Brake Shoes for Honda Elite 125 Scooter
EBC Standard Brake Shoes for Honda Elite 125 Scooter
$87.99
Sale price
$87.99
Regular price
$87.99
SKU:1030-9583
My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Available Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
Standard Brake Shoes
- Made using high-pressure die-cast aluminum platforms with bonded brake linings
- All shoes are radius-ground and edge trimmed
- Feature lead-out chamfers at lining ends and original-style brake shoe springs
Technical Specifications
- MFG. Part Number 609
Vehicle Information
Honda Elite 125 Scooter (1984)
The 1984 Honda Elite 125 (model CH125) was introduced as Honda's first four-stroke modern scooter in the Western market. This model featured a liquid-cooled, OHC, four-stroke 124cc single-cylinder engine. It had a bore and stroke of 56.5mm x 49.5mm, with a compression ratio of 10.3:1. This engine produced 9.6 horsepower at 7500 RPM and 7.0 lbs-ft of torque at 6500 RPM. The 1984 Elite 125 was notable for its advanced features at the time, including a retractable headlight and a digital dashboard. In 1984, the Honda Elite 125 was offered as a single model, with no different trims available. There were no mid-cycle generation or engine changes within this specific year. However, significant modifications, including an increase in engine size to 153cc and the introduction of "standard" and "deluxe" trims (Elite 150 and Elite 150D), occurred in 1985, marking a new generation. FAQ:
Q: Is this product compatible with my 1984 Honda Elite 125?
A: To confirm exact compatibility, please use our year and trim selector at the top of the page.
Maintenance
| Component | Interval | Details |
| Engine Oil | Every 1,600 km | Also clean the engine oil strainer screen. |
| Drive Belt | Every 24,000 km | Inspect for wear and cracks. Replace if necessary. |
| Spark Plug | Every 4,000 km, then every 8,000 km | Gap should be 0.8 - 0.9 mm. |
| Air Filter | Every 20,000 km | Service more frequently in wet or dusty areas. |
| Coolant | Every 16,000 km or 2 years | Inspect level. A 50/50 water/coolant mix is recommended. |