Hot Rods Main Bearing & Seal Kit
M09-479094 (MFG #: K240)
$109.26
Sale price
$109.26
Regular price
$115.01
Sale
-4%
Skip to product information
Hot Rods Main Bearing & Seal Kit for Polaris Sportsman X2 570 ATV
Hot Rods Main Bearing & Seal Kit for Polaris Sportsman X2 570 ATV
$109.26
Sale price
$109.26
Regular price
$115.01
Sale
-4%
SKU:M09-479094
My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Available Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
Precision, high-quality main bearing and seal kits complement installation of Hot Rods crankshaft assemblies.
Technical Specifications
- MFG. Part Number K240
Vehicle Information
Polaris Sportsman X2 570 ATV (2015-2026)
The Polaris Sportsman X2 570, a versatile two-up utility ATV, was produced from 2015 to 2026. It is powered by a consistent 567cc ProStar 4-stroke DOHC single-cylinder engine, delivering 44 horsepower throughout its production run. While the core engine remained unchanged, the Sportsman X2 570 received significant mid-cycle updates. Fuel tank capacity increased from 4.5 to 6.75 gallons by 2018. The 2025 models introduced an enhanced suspension, a strengthened chassis, upgraded body styling, and brighter LED lighting. The 2026 model year brought further substantial enhancements, described as an "all-new" design, featuring a more robust chassis, superior suspension with 9.5 inches of rear travel, increased ground clearance of 11.5 inches, multi-select electronic power steering, and a standard 3,500 LB winch with synthetic rope. Q: How do I find parts specific to my Polaris Sportsman X2 570's year and trim?
A: Please use the year and model selector at the top of this page to ensure you find parts that are a guaranteed fit for your specific vehicle configuration.
Maintenance
| Component | Interval | Details |
| Engine Oil and Filter (Break-in) | 25 hours or 800 km or 1 month (whichever comes first) | Change engine oil and filter. |
| Engine Oil and Filter (Regular) | 50 hours, 1,600 km or annually (whichever comes first) | Change engine oil and filter. Always change filter with oil change. |
| Drive Belt | Inspect and adjust as needed. Replace if necessary. | Inspect every 400 km or 50 hours. Typical lifespan between 1,600 and 3,200 km, but can vary with use. |
| Spark Plug | Inspect and replace as needed. | Inspect and replace every 3,200 km, 200 hours or 24 months. Recommended gap: 0.7-0.8 mm. |
| Air Filter | Inspect and clean as needed. Replace if necessary. | Inspect every 25-50 hours. Replace every 50 hours or more frequently in dusty conditions. |
| Coolant | Check fluid level before every ride. Replace every 60 months (5 years). | Inspect strength seasonally and pressure test system yearly. |
Maintenance intervals may vary slightly by model year and variant. Always consult the official owner's manual for precise recommendations, especially under severe use conditions.