My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Available Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
FEATURES
- Adds preload and effective rate to rear torsion springs
- Allows for more accurate ride height setup
- Increases efficiency of rear torsion springs
- Includes: 1 Pair of Torsion Spring Spacers for Ski-Doo SC5 equipped snowmobiles
- For use on all other springs with an ID measuring more than 2.1"
- Large OD
- Not for SC5M or SC5U
- For an ID of 1.9" please see part# 04-135019
NOTE: If you are unsure if this spacer will fit, please measure your springs before ordering. The OD of this spacer is 1.98", please confirm that there will be roughly .250" of space on one side when installed to allow for proper wrapping.
Technical Specifications
- MFG. Part Number 61-35-000-A
Vehicle Information
Ski-Doo Elite 1500 Snowmobile (2004-2005)
The Ski-Doo Elite 1500, available in both 2004 and 2005, was a robust touring snowmobile featuring a four-stroke engine and a unique side-by-side seating arrangement. Powered by a Rotax 4-TEC engine of 1494cc (often referred to as 1500cc or 1503cc) producing 140 horsepower, this model offered a powerful and comfortable riding experience. There were no significant mid-cycle generation or engine changes reported between the 2004 and 2005 model years. The 2005 model was largely a carryover from 2004, with the primary distinction being the trim name: "Base" in 2004 and "Sport" in 2005. FAQ:
Q: How can I ensure parts fit my Ski-Doo Elite 1500?
A: To guarantee compatibility, please use our year and trim selector on this page to find parts specific to your 2004 or 2005 model.
Maintenance
| Component | Interval | Details |
| Engine Oil and Filter | Every 100 hours or annually; initial change at 25 hours | Check oil level and contamination after a few rides. |
| Drive Belt | Inspection every 50 hours or if performance decreases. Estimated replacement between 2,400 and 4,800 km. | Visually inspect before every ride for wear (cracks, fraying). |
| Spark Plugs | Annually | Inspection and replacement recommended during preseason preparation. |
| Air Filter | Inspection every 25 to 50 riding hours, or after each ride in dusty/muddy conditions | Clean with compressed air. Do not operate without filter. |
| Coolant | Replacement every 2 years | Inspect cooling system and verify level. |