My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Available Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
FEATURES
- Adds preload and effective rate to rear torsion springs
- Allows for more accurate ride height setup
- Increases efficiency of rear torsion springs
- Includes: 1 Pair of Torsion Spring Spacers for Ski-Doo SC5 equipped snowmobiles
- For use on all other springs with an ID measuring more than 2.1"
- Large OD
- Not for SC5M or SC5U
- For an ID of 1.9" please see part# 04-135019
NOTE: If you are unsure if this spacer will fit, please measure your springs before ordering. The OD of this spacer is 1.98", please confirm that there will be roughly .250" of space on one side when installed to allow for proper wrapping.
Technical Specifications
- MFG. Part Number 61-35-000-A
Vehicle Information
Ski-Doo Formula Z 700 Snowmobile (2000)
The 2000 Ski-Doo Formula Z 700 was a high-performance snowmobile, renowned for its robust 698cc liquid-cooled Rotax twin engine and its foundation on the advanced ZX chassis. This model year marked a significant evolution, positioning it as a strong contender in the performance segment. For 2000, the Formula Z 700 was offered as a distinct model, without sub-trims under its specific designation. A key update for this year was the introduction of the new coupled SC-10 II rear suspension, designed to enhance weight transfer characteristics and overall ride quality. The powerful 700cc cylinder reed motor was also a prominent feature, contributing to the model's strong performance. FAQ:
Q: Does this "Guaranteed Fit" apply to all Ski-Doo Formula Z models?
A: This page is specifically for the 2000 Ski-Doo Formula Z 700. Please use our year and model selector to ensure compatibility with your specific snowmobile. Q: How can I confirm the exact year and model of my Ski-Doo?
A: Always refer to your snowmobile's VIN plate or owner's manual for precise year and model information before making a purchase.
Maintenance
| Component | Interval | Details |
| Engine Oil Filter | Not applicable (2-stroke engine) | The 2-stroke engine uses an oil injection system. Check lines and gaskets for leaks. The oil reservoir must be kept full before every ride. |
| Drive Belt | Inspect before every ride. Replace annually or every 1,600 to 4,800 km. | Inspect for cracks, uneven wear, or fraying. It is advisable to start each season with a new belt. |
| Spark Plugs | Clean at least once per season. Replace annually or if worn. | Recommended gap is 0.51 mm. Replace if condition is questionable. |
| Air Filter | Inspect and clean as needed. | Replace if too dirty. Specific interval not stated, but regular inspection is recommended. |
| Coolant | Change every two years. Check level before every ride. | Check level when the engine is cold. |