My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Available Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
FEATURES
- Adds preload and effective rate to rear torsion springs
- Allows for more accurate ride height setup
- Increases efficiency of rear torsion springs
- Includes: 1 Pair of Torsion Spring Spacers for Ski-Doo SC5 equipped snowmobiles
- For use on all other springs with an ID measuring more than 2.1"
- Large OD
- Not for SC5M or SC5U
- For an ID of 1.9" please see part# 04-135019
NOTE: If you are unsure if this spacer will fit, please measure your springs before ordering. The OD of this spacer is 1.98", please confirm that there will be roughly .250" of space on one side when installed to allow for proper wrapping.
Technical Specifications
- MFG. Part Number 61-35-000-A
Vehicle Information
Ski-Doo GTX 380 Snowmobile (2005-2006)
The Ski-Doo GTX 380 (2005-2006) is a touring snowmobile equipped with a reliable 368.3cc, 2-stroke, fan-cooled engine. This model was designed for comfortable rides, offering consistent performance throughout its production years. For the 2005 and 2006 model years, the Ski-Doo GTX 380 maintained a consistent design and specifications. There were no significant mid-cycle generation changes or distinct trim levels offered beyond the base model. The 2006 model was a direct carryover from 2005, ensuring uniformity in parts and performance. FAQ:
Q: How do I ensure I select the correct parts for my Ski-Doo GTX 380?
A: Please use the year and edition selector at the top of the page to confirm compatibility for your specific model.
Maintenance
| Component | Interval | Details |
| Oil (2-stroke injection) | Check before every ride and keep the reservoir full. | |
| Drive Belt | Inspect every 50 hours or 2 400 to 4 800 km | Check for wear, cracks, or damage. Remove for summer storage. |
| Spark Plugs | Annually or every 50 hours | Inspect or replace. |
| Air Filter | Annually or as needed | Inspect, clean, or replace depending on riding conditions. |
| Coolant | Every two years | |
| Chaincase Oil | At the end of the season | |
| Brake Fluid | Check every 50 hours, change every two years | |
| Track Tension | Every 50 hours | |
| Greasing | Regularly | Grease all zerks in the rear suspension, front suspension, steering components, and drivetrain. |
| Pre-Ride Inspection | Before every ride | Always check the snowmobile before riding. |