My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Available Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
FEATURES
- Adds preload and effective rate to rear torsion springs
- Allows for more accurate ride height setup
- Increases efficiency of rear torsion springs
- Includes: 1 Pair of Torsion Spring Spacers for Ski-Doo SC5 equipped snowmobiles
- For use on all other springs with an ID measuring more than 2.1"
- Large OD
- Not for SC5M or SC5U
- For an ID of 1.9" please see part# 04-135019
NOTE: If you are unsure if this spacer will fit, please measure your springs before ordering. The OD of this spacer is 1.98", please confirm that there will be roughly .250" of space on one side when installed to allow for proper wrapping.
Technical Specifications
- MFG. Part Number 61-35-000-A
Vehicle Information
Ski-Doo GTX 500 Snowmobile (2005-2009)
The Ski-Doo GTX 500SS, available from 2005 to 2009, was a popular snowmobile known for its luxury touring characteristics. Throughout these years, it consistently featured a 597cc, liquid-cooled, horizontal in-line, reed valve, 2-stroke engine, producing approximately 105 horsepower. The primary trim offered was the GTX 500SS Sport, though the broader GTX line included other models with varying features. A significant mid-cycle update occurred in 2009. From 2005 to 2008, the GTX 500SS Sport models were built on the original REV chassis with an SC-4 rear suspension. For the 2009 model year, the GTX Sport 500 SS transitioned to the more advanced REV-XR chassis, a variation of the lighter REV-XP, designed for enhanced comfort and touring capabilities. This update also included an upgrade to the SC-5 rear suspension. The 597cc engine itself remained largely unchanged across all model years. FAQ:
Q: How can I ensure this part fits my Ski-Doo GTX 500?
A: Please use our year and model selector at the top of the page to confirm compatibility for your specific snowmobile.
Maintenance
| Component | Interval | Details |
| Oil (2-stroke engine) | Before every ride | Check the oil injection reservoir level and fill as needed. Low oil can severely damage the engine. |
| Drive Belt | Every 50 hours | Inspect the belt for damage, separation, glazing, or excessive wear. Typical lifespan is 2 500 to 5 000 km. A new belt requires a 50 km break-in period without hard acceleration. |
| Spark Plugs | At the start of each season | Replace spark plugs. New spark plugs may be required if the engine is flooded. |
| Air Filter | At the start of each season | Replace the air filter. |
| Coolant | Before every ride and every 2 years | Check level when cold before every ride. Replace coolant every 2 years. Use manufacturer-specified coolant. |
| Break-In Inspection | After the first 10 hours or 500 km | Have an authorized Ski-Doo dealer perform an inspection for new snowmobiles. |