Hygear Suspension Torsion Spring Spacers
04-135000 (MFG #: 61-35-000-A)
$68.16
Sale price
$68.16
Regular price
$74.99
Sale
-9%
Skip to product information
Hygear Suspension Torsion Spring Spacers for Ski-Doo Skandic 500 Snowmobile
Hygear Suspension Torsion Spring Spacers for Ski-Doo Skandic 500 Snowmobile
$68.16
Sale price
$68.16
Regular price
$74.99
Sale
-9%
SKU:04-135000
My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Available Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
FEATURES
- Adds preload and effective rate to rear torsion springs
- Allows for more accurate ride height setup
- Increases efficiency of rear torsion springs
- Includes: 1 Pair of Torsion Spring Spacers for Ski-Doo SC5 equipped snowmobiles
- For use on all other springs with an ID measuring more than 2.1"
- Large OD
- Not for SC5M or SC5U
- For an ID of 1.9" please see part# 04-135019
NOTE: If you are unsure if this spacer will fit, please measure your springs before ordering. The OD of this spacer is 1.98", please confirm that there will be roughly .250" of space on one side when installed to allow for proper wrapping.
Technical Specifications
- MFG. Part Number 61-35-000-A
Vehicle Information
Ski-Doo Skandic 500 Snowmobile (1995-2018)
The Ski-Doo Skandic 500, a renowned utility snowmobile, was produced from 1995 to 2018, known for its robust performance in challenging winter conditions. Initially, the 1995 Skandic 500 featured a durable 497cc Rotax fan-cooled twin engine. Over its production run, the "500" designation evolved, with the 550 Fan engine (553.4cc) becoming prevalent in the mid-2200s for trims like the WT and SUV. By 2018, the Skandic line offered a range of advanced Rotax engines, including the 600 H.O. E-TEC, 900 ACE, and 600 ACE, alongside the 550 Fan, bringing significant advancements in technology and efficiency. The series also saw platform updates, with later models adopting the REV-X and REV® Gen4 platforms, enhancing maneuverability and capability with features like the SC™-5U articulating rear suspension. Trims included the base Skandic 500, WT (Wide Track), SWT (Super Wide Track), 2-Pass, SUV, Sport, and LT, catering to diverse utility needs. Q: How do I ensure I select the correct parts for my Skandic 500?
A: To guarantee a perfect fit, please use the year and model selector at the top of this page. This will filter parts specifically designed for your snowmobile's exact configuration.
Maintenance
| Component | Interval | Details |
| Engine Oil and Filter (4-stroke engine) / Injection Oil (2-stroke engine) | 4-stroke engine: 25 hours (break-in), then every 100 hours or annually, or every 6 400 km. 2-stroke engine: Check before every ride. | For 4-stroke engines, change oil and filter. For 2-stroke engines, check injection oil level and top off as needed. |
| Drive Belt | Inspect before every ride. Replace every 100 hours, every 4 800 km, or every 24 months. | Replace if signs of wear (cracking, fraying). Many riders replace it at the start of each season. |
| Spark Plugs | Annually or at the start of each season. | Inspect and replace for optimal performance. |
| Air Filter | Inspect/clean every 5 hours, every 800 km, or monthly. Replace (dry filters) every 24 000 to 48 000 km. | For snow filters, remove, shake, and dry. Replacement intervals may vary depending on dust levels. |
| Coolant | Check level before every ride. Replace every two years. | Check level when cold. Brake fluid has a similar replacement interval. |
Maintenance intervals may vary slightly by model year and engine type (2-stroke or 4-stroke). These guidelines are general; always consult your snowmobile's owner's manual for precise information.