Hygear Suspension Torsion Spring Spacers
04-135000 (MFG #: 61-35-000-A)
$68.16
Sale price
$68.16
Regular price
$74.99
Sale
-9%
Skip to product information
Hygear Suspension Torsion Spring Spacers for Ski-Doo Skandic 600 Snowmobile
Hygear Suspension Torsion Spring Spacers for Ski-Doo Skandic 600 Snowmobile
$68.16
Sale price
$68.16
Regular price
$74.99
Sale
-9%
SKU:04-135000
My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Available Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
FEATURES
- Adds preload and effective rate to rear torsion springs
- Allows for more accurate ride height setup
- Increases efficiency of rear torsion springs
- Includes: 1 Pair of Torsion Spring Spacers for Ski-Doo SC5 equipped snowmobiles
- For use on all other springs with an ID measuring more than 2.1"
- Large OD
- Not for SC5M or SC5U
- For an ID of 1.9" please see part# 04-135019
NOTE: If you are unsure if this spacer will fit, please measure your springs before ordering. The OD of this spacer is 1.98", please confirm that there will be roughly .250" of space on one side when installed to allow for proper wrapping.
Technical Specifications
- MFG. Part Number 61-35-000-A
Vehicle Information
Ski-Doo Skandic 600 Snowmobile (2001-2026)
The Ski-Doo Skandic 600 snowmobile, produced from 2001 to 2026, is renowned for its ruggedness and utility and deep-snow capabilities. It has been offered with various 600cc Rotax engine configurations and multiple platforms over the years. During this period, the Skandic 600 underwent significant evolution. Early models (2001-2006) utilized chassis like the RF and GLX with a 597cc 2-stroke engine. Around 2007-2014, the REV-XU platform was introduced, accompanied by the 600 H.O. E-TEC (2-stroke) and 600 ACE (4-stroke) engines, improving efficiency. In 2019, the 600R E-TEC engine (125 hp) appeared, followed in 2021 by the REV Gen4 platform for all Skandic models, integrating the new 600 EFI (85 hp) engine and the 600R E-TEC. WT, SUV, SWT, Sport, LE, and SE trims offered options tailored to every need. FAQ:
Q: How can I ensure this part fits my Ski-Doo Skandic 600?
R: To guarantee compatibility, please use our year and trim selector on this page. It will guide you to the specific parts for your model. Q: Are there significant differences between Skandic 600 model years?
R: Yes, platform and engine changes occurred. The year and trim selector will help you identify the correct parts for your specific configuration.
Maintenance
| Component | Interval | Details |
| Engine Oil and Filter (4-stroke ACE engines) | Initial: 25 hours or 800 km. Subsequent: Annually or 100 hours / 1,600 km. | Change oil and filter. More frequent changes may be necessary in extreme conditions. Always replace the filter when changing the oil. |
| Engine Oil (2-stroke engines) | Before every ride | Check the injection oil reservoir level. Low levels can severely damage the engine. |
| Drive Belt | Visual inspection before every ride. Replace if wear is observed or every 2,400 to 4,800 km. | Inspect for cracks, uneven wear, or fraying. Many riders start the season with a new belt. |
| Spark Plugs | Annually (moderate use) | Replace one set per season before it starts. More frequent replacement for heavy use. |
| Air Filter | Regular inspection | Snowmobiles typically do not have a traditional air filter. Inspect intake screens for obstructions and clean them. |
| Coolant | Change every 2 years. Check level before every ride. | Check level when the engine is cold. Use manufacturer-specified coolant. |
Maintenance intervals may vary depending on the exact model and operating conditions. Always consult the official owner's manual for precise information.