Hygear Suspension Torsion Spring Spacers
04-135000 (MFG #: 61-35-000-A)
$68.16
Sale price
$68.16
Regular price
$74.99
Sale
-9%
Skip to product information
Hygear Suspension Torsion Spring Spacers for Ski-Doo Summit 1000 Snowmobile
Hygear Suspension Torsion Spring Spacers for Ski-Doo Summit 1000 Snowmobile
$68.16
Sale price
$68.16
Regular price
$74.99
Sale
-9%
SKU:04-135000
My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Available Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
FEATURES
- Adds preload and effective rate to rear torsion springs
- Allows for more accurate ride height setup
- Increases efficiency of rear torsion springs
- Includes: 1 Pair of Torsion Spring Spacers for Ski-Doo SC5 equipped snowmobiles
- For use on all other springs with an ID measuring more than 2.1"
- Large OD
- Not for SC5M or SC5U
- For an ID of 1.9" please see part# 04-135019
NOTE: If you are unsure if this spacer will fit, please measure your springs before ordering. The OD of this spacer is 1.98", please confirm that there will be roughly .250" of space on one side when installed to allow for proper wrapping.
Technical Specifications
- MFG. Part Number 61-35-000-A
Vehicle Information
Ski-Doo Summit 1000 Snowmobile (2005-2008)
The Ski-Doo Summit 1000, produced from 2005 to 2008, was a high-performance mountain snowmobile known for its powerful 2-stroke engine. Across 2005-2007, it featured the 997.5cc (or 998cc) Rotax 1000 SDI engine, a semi-direct injected twin-cylinder unit. Trims like Highmark and Highmark X offered advanced suspension and aggressive track options. A significant generation break occurred in 2008. While the 1000 SDI engine was still available in other Ski-Doo models, the Summit line for 2008 largely transitioned to the new, lighter, and more rigid REV-XP chassis. Concurrently, Summit models primarily adopted the 800R Power T.E.K. engine, marking a shift away from the 1000cc engine in the Summit series for this period. FAQ:
Q: Is this product compatible with my Ski-Doo Summit 1000?
A: To ensure perfect compatibility, please use the year and edition selector at the top of this page.
Maintenance
| Component | Interval | Details |
| Oil (Injection Oil) | Before every ride | Check level and top off as needed. Use high-quality 2-stroke injection oil. |
| Oil Filter | Not applicable | 2-stroke engines use an oil injection system, not a traditional oil filter. |
| Drive Belt | Every 50 hours or between 2,500 km and 5,000 km | Inspect for wear before/after each ride and if performance feels off. Clean clutch periodically. |
| Spark Plugs | As needed, typically before each season | Inspect and replace as necessary. |
| Air Filter | Every 5 hours, 800 km, or monthly | Inspect and clean. |
| Coolant | Before every ride (check), every two years (change) | Check level when engine is cold. Change fluid every two years. |
| Brake Fluid | Every two years |
These intervals are based on general snowmobile maintenance guidelines and may not be 100% accurate for your specific model. Always consult your official owner's manual for precise information.