Kimpex Snowmobile HD Clutch Puller
AC19000064 (MFG #: 529-000-064)
$31.99
Sale price
$31.99
Regular price
$36.49
Sale
-12%
Skip to product information
Kimpex Snowmobile HD Clutch Puller for Polaris Charger 336 Snowmobile
Kimpex Snowmobile HD Clutch Puller for Polaris Charger 336 Snowmobile
$31.99
Sale price
$31.99
Regular price
$36.49
Sale
-12%
SKU:AC19000064
My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Available Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
Technical Specifications
- MFG. Part Number 529-000-064
Vehicle Information
Polaris Charger 336 Snowmobile (1970)
The 1970 Polaris Charger 336 is an iconic vintage snowmobile, part of the TX Charger series. While a “336” designation is mentioned in some general specifications, the most commonly cited engine for the 1970 Charger is a two-cylinder, two-stroke 398cc unit, producing 27 horsepower at 6,500 RPM. This engine featured a cooling fan built into the flywheel and utilized two Mikuni VM30 carburetors. Other engine displacements were also associated with the broader TX Charger series, including 294cc, 335cc, 340cc, and 436cc engines, offering a range of options for enthusiasts. The TX Charger series was primarily distinguished by these various engine sizes. There is no information indicating mid-cycle generation or engine changes for the 1970 Polaris Charger. FAQ
Q: How can I be sure this part fits my 1970 Polaris Charger 336?
R: To ensure compatibility, please use our year and model selector located at the top of the page. It will help you find parts specific to your snowmobile.
Maintenance
| Component | Interval | Details |
| Engine Oil Filter | Not applicable | The two-stroke engine does not use a traditional oil filter. Lubrication is achieved by mixing oil with gasoline (20:1 ratio). |
| Spark Plug | Inspect and replace as needed | Typically at the beginning of each season or every 50 to 100 hours of operation. Recommended spark plug: NGK B7ES, gapped at 0.5 mm. |
| Drive Belt | Inspect and replace as needed | Inspect for wear, cracks, or fraying before each season and periodically during heavy use. Replace at the first sign of significant damage. |
| Air Filter | Inspect and clean regularly | Clean frequently, especially in dusty or snowy conditions. Replace if damaged or excessively dirty. |
Maintenance intervals for this vintage model are based on general practices and may not be 100% accurate. Please consult the original owner's manual for precise information.