MBRP Standard Series Performance Snowmobile Exhaust
02-2241 (MFG #: 2250110)
$339.99
Sale price
$339.99
Regular price
$339.99
Skip to product information
MBRP Standard Series Performance Snowmobile Exhaust for Arctic Cat M6 Snowmobile
MBRP Standard Series Performance Snowmobile Exhaust for Arctic Cat M6 Snowmobile
$339.99
Sale price
$339.99
Regular price
$339.99
SKU:02-2241
My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Available Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
Make the biggest performance gains and stand out from the crowd with the most aggressive sound offering from MBRP. Installing an MBRP Race Profile exhaust will change the attitude of your mild-mannered snowmobile into an all-out race sled in a matter of minutes.
FEATURES
- 2 HP Gain
- 15 pound weight savings
- Aggressive sound, racing inspired - attention seeking tone
- T304 stainless steel
- 2 Year warranty
- Bolt-on install
**NOTE: Some jetting changes may be required on some models in certain riding conditions. Fuel tuning may be required on some EFI models. See Dobeck Electronic Jet Kits to to take full advantage of upgrading from a stock exhaust. Performance exhausts may not be legal in your area. Please check with your local authority for any such restrictions. **
Technical Specifications
- MFG. Part Number 2250110
Vehicle Information
Arctic Cat M6 Snowmobile (2006-2011)
The Arctic Cat M6, a mountain snowmobile produced from 2006 to 2011, was renowned for its lightweight maneuverability, built upon the M chassis introduced in 2005. Throughout this period, it consistently featured a 599cc, liquid-cooled, 2-stroke engine with electronic fuel injection (EFI), often referred to as the 600 EFI II, delivering approximately 118 horsepower. While the engine remained consistent, the M6 received several significant updates. In 2007, it incorporated an updated ACT drive system with push-button reverse and rider-forward ergonomics. The year 2009 saw the introduction of the Arctic Cat Engine Reverse (ACER) system, reducing weight. In 2010, refinements included a lighter, taller seat and new skis. Finally, in 2011, Fox Zero Pro shocks were added, eliminating torsion springs for weight savings. The primary distinctions among models were track length, available in 141 or 153 inches. FAQ:
Q: How can I ensure this part fits my Arctic Cat M6?
R: To guarantee compatibility, please use the year and edition selector located at the top of this product page.
Maintenance
| Component | Interval | Details |
| Oil Injection System | Before every ride | Check reservoir level. For break-in, the first tank of fuel should be premixed at a 100:1 ratio. |
| Drive Belt | Regular inspection. Replacement: 2,400 to 4,800 km | Check for wear, cracks, and tears. Replace if damaged. Break-in: approximately 40 km at 3/4 throttle or less. |
| Spark Plug | Periodic check: 100 hours | Inspect, clean, or replace as necessary. Gap: 0.7-0.8 mm. |
| Air Filter | Check: 25-50 hours or after each ride in dusty/muddy conditions | Clean or replace if damaged or excessively dirty. Clean air box during each filter change. |
| Coolant | Level check: before every ride. Replacement: 100 hours or annually | Check level when cold and hose condition. Add as necessary. Replace at least once per season. |
Maintenance intervals are based on general information and may not be 100% accurate. Please consult your model's official owner's manual for precise details.