Moose Rear Wheel Bearing Upgrade Kit
1010-5874 (MFG #: 25-1552)
$111.95
Sale price
$111.95
Regular price
$111.95
Skip to product information
Moose Rear Wheel Bearing Upgrade Kit for KTM 520 SX Dirt Bike
Moose Rear Wheel Bearing Upgrade Kit for KTM 520 SX Dirt Bike
$111.95
Sale price
$111.95
Regular price
$111.95
SKU:1010-5874
My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Available Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
Features
- Instead of just replacing the worn bearings in your Husaberg, Husqvarna or KTM, upgrade them with this complete kit
- Compared to other bikes, Husaberg, Husqvarna and KTM use low load wheel bearings - this kit brings them up to spec
- Upgrade your bearings, spacers, and seals in one shot
- Rubber sealed bearings for additional protection from water and dirt.
- Precision high-speed bearings manufactured to ABEC3 standards.
- Chevron SRI-2 Grease with hi-performance rust and oxidation inhibitors (-29ºC - 177ºC).
- Double lip seal Type TC.
Technical Specifications
- MFG. Part Number 25-1552
Vehicle Information
KTM 520 SX Dirt Bike (2000-2002)
The KTM 520 SX, produced from 2000 to 2002, was a pivotal model in KTM's early 2000s four-stroke motocross initiative. Designed for competitive MX and Supercross, it featured a liquid-cooled, single-cylinder, 510 cc four-stroke engine, part of the robust RFS (Racing Four Stroke) platform. This engine typically delivered 50 to 52 horsepower and was paired with a 4-speed transmission. The chassis, adapted from KTM's 250 two-stroke models, included an enlarged engine cradle and KTM's unique no-link rear suspension with a WP PDS damper. The 2000 model year marked the introduction of this entirely new four-stroke racing series. Throughout the 2000-2002 production run, the core engine and chassis architecture of the 520 SX remained consistent, with no significant mid-cycle generation changes reported. The primary trim offered was the 520 SX Racing. FAQ:
Q: How do I ensure this part fits my KTM 520 SX?
A: To guarantee compatibility, please use the year and edition selector at the top of this page.
Maintenance
| Component | Interval | Details |
| Engine Oil and Oil Filter | Every 10 hours (recreational) or 5 hours (aggressive/race) | The oil filter should be changed during each oil change. |
| Air Filter | Every 15 hours (recreational) or 5 hours (aggressive/race) | Clean after every ride in dusty conditions, or every 2-3 rides in moderate environments. Replace if damaged or degraded. |
| Spark Plug | Not specified for replacement | Inspect for wear or damage during maintenance to assess engine condition. |
| Coolant | Not specified for flushing/replacement | Check level when cold (approximately 10 mm above radiator fins). Inspect hoses for leaks. |
The maintenance intervals provided are based on available information, which may include general recommendations. Always consult your official owner's manual for precise, model-specific instructions and intervals.