Moose Rear Wheel Bearing Upgrade Kit
1010-5874 (MFG #: 25-1552)
$111.95
Sale price
$111.95
Regular price
$111.95
Skip to product information
Moose Rear Wheel Bearing Upgrade Kit for KTM 560 SMR Dirt Bike
Moose Rear Wheel Bearing Upgrade Kit for KTM 560 SMR Dirt Bike
$111.95
Sale price
$111.95
Regular price
$111.95
SKU:1010-5874
My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Available Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
Features
- Instead of just replacing the worn bearings in your Husaberg, Husqvarna or KTM, upgrade them with this complete kit
- Compared to other bikes, Husaberg, Husqvarna and KTM use low load wheel bearings - this kit brings them up to spec
- Upgrade your bearings, spacers, and seals in one shot
- Rubber sealed bearings for additional protection from water and dirt.
- Precision high-speed bearings manufactured to ABEC3 standards.
- Chevron SRI-2 Grease with hi-performance rust and oxidation inhibitors (-29ºC - 177ºC).
- Double lip seal Type TC.
Technical Specifications
- MFG. Part Number 25-1552
Vehicle Information
KTM 560 SMR Dirt Bike (2006-2008)
The KTM 560 SMR, a high-performance supermoto motorcycle, was primarily produced for the 2006 and 2007 model years. While a 2008 model is not consistently documented, any such model would likely share the same specifications as its predecessors. This powerful machine is equipped with a liquid-cooled, single-cylinder, four-stroke engine, displacing 565.5 ccm. It features a bore and stroke of 100.0 x 72.0 mm, an 11:1 compression ratio, and a Keihin FCR-MX flat-side carburetor paired with a 6-speed transmission. The engine delivers 45 Nm of torque at 3,250 rpm. Throughout its production from 2006 to 2007, the KTM 560 SMR was offered as a single trim, simply designated "560 SMR." There were no significant mid-cycle revisions or major engine changes reported between the 2006 and 2007 models; engine specifications remained consistent. FAQ:
Q: How do I ensure parts fit my specific KTM 560 SMR?
A: To guarantee compatibility, please use the year and model selector at the top of this page.
Maintenance
| Component | Interval | Details |
| Engine Oil and Oil Filter | 10 to 20 hours of operation | Check oil level before each ride. Replace more frequently (closer to 10 hours) for aggressive riding or racing; 15-20 hours for trail riding. |
| Air Filter | Before each ride or as often as oil changes | Clean the air filter and air filter box regularly, especially after riding in dusty conditions. |
| Coolant | Before each ride | Check the cooling fluid level. |
| Spark Plug | 40 hours of operation (inspection/replacement) | Often coincides with valve clearance inspection. |
| Drive Chain | Cleaning and lubrication: 10 to 20 hours or 800 km; Tension check: 1,600 km | Clean, lubricate, and check tension regularly. |
The intervals listed are general recommendations based on common dirt bike maintenance practices and may not be 100% exact for your specific model. Always consult your official KTM 560 SMR owner's manual for precise service schedules.