PowerMadd Adjustable Height Snowmobile Pivot Riser
4"-6"
$317.99
Sale price
$317.99
Regular price
$317.99
Skip to product information
PowerMadd Adjustable Height Snowmobile Pivot Riser for Ski-Doo Grand Touring 1000 Snowmobile
PowerMadd Adjustable Height Snowmobile Pivot Riser for Ski-Doo Grand Touring 1000 Snowmobile
$317.99
Sale price
$317.99
Regular price
$317.99
SKU:1004-2049
My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Available Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
FEATURES
- Raise or lower handlebars up to 3"
- Go from stand-up boondocking to trails riding
- Share a sled with someone who likes a different bar height
- Easy to install any T style steering post; wide or narrow
- Flat top steering post requires a pivot adapter, which adds another 1.25" height
- Minimum height 5", maximum height 8"
- Height is measured from center or bars to center of steering post.
Note: If you have a Ski Doo Gen 4 and have a fitment issue with the Adjustable Riser, call 651.462.8465 for a free replacement part.
Note: These risers are not compatible with the stock Ski Doo G4 top clamps needed for the OEM grab strap. Re-installing the OEM grab strap is not possible once the riser is installed.
Technical Specifications
- MFG. Part Number 45591
Vehicle Information
Ski-Doo Grand Touring 1000 Snowmobile (2002-2003)
The 2002-2003 Ski-Doo Grand Touring 1000 is a touring snowmobile powered by the Rotax V-1000 engine. This 989cc liquid-cooled V-twin engine produces 82 horsepower and features an Electronic Fuel Injection (EFI) system with four valves per cylinder. The 2003 model, primarily offered as the Grand Touring V1000 Sport, marked the introduction of this notable engine for the Grand Touring lineup. While 2003 saw the introduction of the REV chassis for many Ski-Doo models, a major innovation with its "rider-forward" geometry, it is not explicitly confirmed that the Grand Touring 1000 adopted it in its inaugural year. The 2002 model, though listed in parts catalogs, was less widely available or introduced late in the model year. Q: Is this product compatible with my Ski-Doo Grand Touring 1000?
R: To ensure perfect compatibility, please use our year and model selector at the top of the page.
Maintenance
| Component | Interval | Details |
| Drive Belt | 50 hours or as needed | Visually inspect before each ride for wear, cracks, or flat spots. Replace if worn, typically between 2,400 km and 4,800 km. It is recommended to start each season with a fresh drive belt. |
| Spark Plug | Annually or as needed | Inspect, clean, and replace if necessary. The spark plug gap should be 0.51 mm. |
| Air Filter | As needed | Clean the air filter and ensure the inside of the air silencer is clean and dry before reinstalling. |
| Coolant | Every 2 years | Inspect the cooling system and replace the coolant. Check the coolant level before each ride when the engine is cold. |
The maintenance intervals below are based on general recommendations and manual excerpts. For precise, model-specific information, always consult the official Ski-Doo owner's manual.