PowerMadd Pivot Adapter Kit
08-10030-01 (MFG #: 45580)
$97.99
Sale price
$97.99
Regular price
$97.99
Skip to product information
PowerMadd Pivot Adapter Kit for Ski-Doo Mach Z 780 Snowmobile
PowerMadd Pivot Adapter Kit for Ski-Doo Mach Z 780 Snowmobile
$97.99
Sale price
$97.99
Regular price
$97.99
SKU:08-10030-01
My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Available Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
Allows the handlebar and rider to move forward, optimizing the center of gravity and improving handling and control. Handlebars can be pivoted forward or back from original stock position. Pivot adapter raises handlebars an additional 1.25. Choose a PowerMadd Riser Block height of 2-10" or an OEM Pivot Style Riser Block. Most snowmobiles accept the pivot adapter and a 2" Riser Block without modification to cables or wiring.
FEATURES
- Converts flat steering post to pivot style
- Machined from 6061-T6 aluminum
- Raises bars an additional 11/4in.
- Black anodized finish
- Works with aftermarket or OEM handlebar risers
- Comes with hardware and clamps as pictured
Technical Specifications
- MFG. Part Number 45580
Vehicle Information
Ski-Doo Mach Z 780 Snowmobile (1993-1996)
The Ski-Doo Mach Z 780, produced from 1993 to 1996, was a high-performance snowmobile known for its powerful triple-cylinder engine and innovative chassis. It was powered by a 774cc (often referred to as 780 type) liquid-cooled, 3-cylinder Rotax engine with R.A.V.E. valves, producing approximately 150 horsepower. Fuel delivery was managed by three Mikuni TM-38 carburetors and it featured three tuned exhaust pipes. The introduction of the Mach Z in 1993 marked significant innovations for Ski-Doo, including the first all-aluminum F-2000 chassis, which contributed to a significant weight reduction, and the first 2-stroke, 3-cylinder liquid-cooled engine in a production snowmobile. The 1993 model notably featured a fiberglass hood, which was replaced with plastic in subsequent years, and the introduction of Ultra Glide composite skis. The F-2000 chassis and 774cc engine remained consistent through 1996, with the DSA (Direct Shock Action) front suspension as a key feature. In 1996, a Mach Z LT (Long Track) variant was added to the standard lineup. FAQ:
Q: Is my Mach Z 780 compatible with this part?
R: To ensure perfect compatibility, please use the year and trim selector on this page.
Maintenance
| Component | Interval | Details |
| Oil Filter | Before every ride | 2-stroke engines do not have a traditional engine oil filter. Check the oil injection reservoir level and top off as needed. |
| Drive Belt | Before every ride (inspection); 50 hours (formal inspection) | Inspect the belt for signs of wear (cracking, fraying). Replace if wear signs are present or if performance is inconsistent. Typical lifespan: 2,500 to 5,000 km. It is recommended to start each season with a fresh belt. |
| Spark Plugs | Annually or more frequently | Replace annually for moderate use, or more frequently for aggressive riding (some suggest every 3-4 trips). Install new, properly gapped spark plugs after preseason preparation. |
| Air Filter | 25 to 50 hours or after each ride in harsh conditions | Check, clean, or replace regularly. Essential for optimal performance. In deep powder snow, periodically shake snow out of the filter and dry it. |
| Coolant | Every 2 years | Check level before every ride (cold engine). Some recommend annual or 4-5 year changes, but 2 years is a common guideline. |
These intervals are general guidelines. It is crucial to consult your specific model's owner's manual for precise recommendations.