My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Available Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
This innovative Universal Pivot Riser System works on all brands of snowmobiles with a flat steering post! The Universal Riser raises bars 3_ and can be used alone or with additional riser blocks for upto a 6" raise in your bars. Dual pivot points allow for bars to be positioned front to back and rotated up or down for precise positioning. At only 3.5" wide, the Universal Pivoting System is perfect for use on the narrow style mountain bars.
Technical Specifications
- MFG. Part Number 45400
Vehicle Information
Arctic Cat F570 Snowmobile (2008-2014)
The Arctic Cat F570, produced from 2008 to 2014, was an entry-level snowmobile known for its reliable 565cc (often rounded to 570cc) fan-cooled, two-stroke twin engine, delivering approximately 60-63 horsepower. It was built on the Twin Spar chassis, which offered a more modern rider position. Throughout its production run, the F570 primarily featured a single "Base" trim. While the Twin Spar chassis received minor refinements like a softer sway bar in 2008, the F570 itself did not undergo major mid-cycle generation or engine changes between 2008 and 2014. Its 570 Gen II engine had already been updated with cleaner-burning technology prior to 2008, ensuring consistent performance across these model years. FAQ:
Q: How do I ensure I'm selecting the correct part for my F570?
A: Always use the year and model selector on our page to confirm compatibility for your specific Arctic Cat F570 (2008-2014).
Maintenance
| Component | Interval | Details |
| 2-stroke injection oil | Before every ride | The F570 uses a two-stroke oil injection system. Check reservoir and use high-quality two-stroke injection oil (TC-W3 or manufacturer-specific). |
| Drive Belt | 2,400 to 4,800 km | Break in a new belt for approximately 40 km at 3/4 throttle or less. Check for wear and replace if damaged. Periodically clean drive clutch and driven pulley. |
| Spark Plugs | Check and replace as needed | User-serviceable item. No specific interval provided. |
| Air Filter | Clean as needed | Cleaning recommended. No specific interval provided. |
| Coolant | Every 2 years | Check level seasonally and pressure test system yearly. |
| Brake Fluid | Every 2 years | Check levels at beginning and mid-season. |
| Initial Checkup (after break-in) | 160 to 480 km | Includes jetting carburetors, checking drive belt deflection, and adjusting track tension and alignment. |