My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Available Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
The 2.3 Platform Foot Pegs from ProTaper have a unique replaceable cleat design to ensure you are getting the top performance out of your foot pegs. The two piece platform system allows three levels of adjustment, and is made from 7075 hard anodized billet aluminum replaceable cleats
Technical Specifications
- MFG. Part Number 023216
Vehicle Information
KTM 560 SMR Dirt Bike (2006-2008)
The KTM 560 SMR, a high-performance supermoto motorcycle, was primarily produced for the 2006 and 2007 model years. While a 2008 model is not consistently documented, any such model would likely share the same specifications as its predecessors. This powerful machine is equipped with a liquid-cooled, single-cylinder, four-stroke engine, displacing 565.5 ccm. It features a bore and stroke of 100.0 x 72.0 mm, an 11:1 compression ratio, and a Keihin FCR-MX flat-side carburetor paired with a 6-speed transmission. The engine delivers 45 Nm of torque at 3,250 rpm. Throughout its production from 2006 to 2007, the KTM 560 SMR was offered as a single trim, simply designated "560 SMR." There were no significant mid-cycle revisions or major engine changes reported between the 2006 and 2007 models; engine specifications remained consistent. FAQ:
Q: How do I ensure parts fit my specific KTM 560 SMR?
A: To guarantee compatibility, please use the year and model selector at the top of this page.
Maintenance
| Component | Interval | Details |
| Engine Oil and Oil Filter | 10 to 20 hours of operation | Check oil level before each ride. Replace more frequently (closer to 10 hours) for aggressive riding or racing; 15-20 hours for trail riding. |
| Air Filter | Before each ride or as often as oil changes | Clean the air filter and air filter box regularly, especially after riding in dusty conditions. |
| Coolant | Before each ride | Check the cooling fluid level. |
| Spark Plug | 40 hours of operation (inspection/replacement) | Often coincides with valve clearance inspection. |
| Drive Chain | Cleaning and lubrication: 10 to 20 hours or 800 km; Tension check: 1,600 km | Clean, lubricate, and check tension regularly. |