Ride Engineering Billet Triple Clamp Set
M08-750003 (MFG #: KT-BTB24-BA)
$653.88
Sale price
$653.88
Regular price
$769.00
Sale
-14%
Skip to product information
Ride Engineering Billet Triple Clamp Set for Husqvarna TX 300 Dirt Bike
Ride Engineering Billet Triple Clamp Set for Husqvarna TX 300 Dirt Bike
$653.88
Sale price
$653.88
Regular price
$769.00
Sale
-14%
SKU:M08-750003
My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Available Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
These CRF triple clamps have been completely redesigned in 2017. They fit both the previous 48mm and the new 49mm KYB forks. Riders with pre 2017 models will gain the benefits Honda put into the stock 2017 triple clamps, plus the following.
Riders with 2017 models will 1) gain a more comfortable bar position 5mm lower and 3mm forward; 2) Weight savings is 5 oz lighter than stock; 3) Not only are they made from 2024 Aluminum which is the same alloy the factory teams use but the whole area where the bottom clamp wraps around the forks has been designed to flex and work with the front suspension. 4) Ride Eng. have three offsets to choose from to customize the handling of your bike. 22mm Offset recommended for Motocross (MX); World Off-road Championship Series (WORCS) & Desert Racing (DR) (stock offset for 48mm forks is 20mm, for 49mm forks is 22).
Test riders switching from 20mm offset said "it calms down the nervous front end making it better in ruts and on rough, loose terrain".
Usually compatible with aftermarket stabilizers, call the manufacturer to confirm.
Technical Specifications
- MFG. Part Number KT-BTB24-BA
Vehicle Information
Husqvarna TX 300 Dirt Bike (2017-2026)
The Husqvarna TX 300, a prominent off-road racing motorcycle, has seen significant evolution from 2017 to 2026. Designed for closed-course competition, it is powered by a single-cylinder, two-stroke engine with a consistent displacement of 293.2 cc throughout this period. Significant changes have marked its evolution. Initially carbureted (TX 300) from 2017 to 2019, it transitioned to electronic fuel injection (TX 300i) in 2020. A new generation was introduced in 2023, featuring a redesigned engine for Throttle Body Injection (TBI) and a new frame. In 2025, a lighter frame and revised WP suspension settings were added, alongside the introduction of the "Heritage" model. Q: Is this product compatible with my Husqvarna TX 300?
R: To confirm exact compatibility, please use the year and edition selector on this page.
Maintenance
| Component | Interval | Details |
| Engine Oil and Oil Filter | Every 5 to 10 operating hours | Replace oil and filter every 5 hours for aggressive/race riding, or every 10 hours for recreational riding. |
| Air Filter | Every 2 to 15 operating hours | Inspect after every ride. Clean every 2-5 hours (aggressive/race) or 10-15 hours (recreational). Replace if damaged or heavily soiled. |
| Spark Plug | Inspect every 10 to 15 hours | Replace as needed. |
| Drive Chain and Sprockets | Regularly | Clean, lubricate, and inspect tension (20-30 mm slack) and wear. |
| Coolant | Check regularly | Replace as per owner's manual recommendations. |
Maintenance intervals may vary by model year and riding conditions. Always consult the official owner's manual for your specific model.