Sno-Stuff Standard Wear Rod
1039-2862 (MFG #: 510-108)
$19.02
Sale price
$19.02
Regular price
$19.02
Skip to product information
Sno-Stuff Standard Wear Rod for Ski-Doo Grand Touring 1000 Snowmobile
Sno-Stuff
Sno-Stuff Standard Wear Rod for Ski-Doo Grand Touring 1000 Snowmobile
Sno-Stuff
$19.02
Sale price
$19.02
Regular price
$19.02
SKU:1039-2862
My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Available Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
FEATURES
- Sno-Stuff wear bars are made from the highest-quality, cold-rolled, case-hardened steel to provide the least amount of wear and the greatest value for the dollar
- Formed in a permanent jig to ensure that they always fit as well as, or better than, original equipment
- Double-welded studs for extra strength
- Long enough to accommodate Ski Skins
- Painted black to resist rust
- Sold each
Technical Specifications
- MFG. Part Number 510-108
Vehicle Information
Ski-Doo Grand Touring 1000 Snowmobile (2002-2003)
The 2002-2003 Ski-Doo Grand Touring 1000 is a touring snowmobile powered by the Rotax V-1000 engine. This 989cc liquid-cooled V-twin engine produces 82 horsepower and features an Electronic Fuel Injection (EFI) system with four valves per cylinder. The 2003 model, primarily offered as the Grand Touring V1000 Sport, marked the introduction of this notable engine for the Grand Touring lineup. While 2003 saw the introduction of the REV chassis for many Ski-Doo models, a major innovation with its "rider-forward" geometry, it is not explicitly confirmed that the Grand Touring 1000 adopted it in its inaugural year. The 2002 model, though listed in parts catalogs, was less widely available or introduced late in the model year. Q: Is this product compatible with my Ski-Doo Grand Touring 1000?
R: To ensure perfect compatibility, please use our year and model selector at the top of the page.
Maintenance
| Component | Interval | Details |
| Drive Belt | 50 hours or as needed | Visually inspect before each ride for wear, cracks, or flat spots. Replace if worn, typically between 2,400 km and 4,800 km. It is recommended to start each season with a fresh drive belt. |
| Spark Plug | Annually or as needed | Inspect, clean, and replace if necessary. The spark plug gap should be 0.51 mm. |
| Air Filter | As needed | Clean the air filter and ensure the inside of the air silencer is clean and dry before reinstalling. |
| Coolant | Every 2 years | Inspect the cooling system and replace the coolant. Check the coolant level before each ride when the engine is cold. |
The maintenance intervals below are based on general recommendations and manual excerpts. For precise, model-specific information, always consult the official Ski-Doo owner's manual.