Wolftech Exhaust Valve Cable
05-100
$51.99
Sale price
$51.99
Regular price
$51.99
Skip to product information
Wolftech Exhaust Valve Cable for Arctic Cat M6 Snowmobile
Wolftech Exhaust Valve Cable for Arctic Cat M6 Snowmobile
$51.99
Sale price
$51.99
Regular price
$51.99
SKU:05-100
My Garage
Select a ride to guarantee fitment.
My Garage
Add your vehicles to your garage. Several features will then be available to facilitate your searches.
- Store vehicles in your garage
- Easily find guaranteed fit products and accessories
- Get product recommendations
Out of Stock Online
Free shipping on orders over $99
Standard Fulfillment: -
Expedited Fulfillment: -
Lowest Price Guaranteed
Fast Shipping
Easy Returns
Description
FEATURES
- Manufactured by SPI Replacement exhaust valve cable
- Replaces Arctic Cat OEM #'s 3006-525, 3006-689 and 3007-773
- Made in Taiwan
Technical Specifications
- MFG. Part Number 05-100
Vehicle Information
Arctic Cat M6 Snowmobile (2006-2011)
The Arctic Cat M6, a mountain snowmobile produced from 2006 to 2011, was renowned for its lightweight maneuverability, built upon the M chassis introduced in 2005. Throughout this period, it consistently featured a 599cc, liquid-cooled, 2-stroke engine with electronic fuel injection (EFI), often referred to as the 600 EFI II, delivering approximately 118 horsepower. While the engine remained consistent, the M6 received several significant updates. In 2007, it incorporated an updated ACT drive system with push-button reverse and rider-forward ergonomics. The year 2009 saw the introduction of the Arctic Cat Engine Reverse (ACER) system, reducing weight. In 2010, refinements included a lighter, taller seat and new skis. Finally, in 2011, Fox Zero Pro shocks were added, eliminating torsion springs for weight savings. The primary distinctions among models were track length, available in 141 or 153 inches. FAQ:
Q: How can I ensure this part fits my Arctic Cat M6?
R: To guarantee compatibility, please use the year and edition selector located at the top of this product page.
Maintenance
| Component | Interval | Details |
| Oil Injection System | Before every ride | Check reservoir level. For break-in, the first tank of fuel should be premixed at a 100:1 ratio. |
| Drive Belt | Regular inspection. Replacement: 2,400 to 4,800 km | Check for wear, cracks, and tears. Replace if damaged. Break-in: approximately 40 km at 3/4 throttle or less. |
| Spark Plug | Periodic check: 100 hours | Inspect, clean, or replace as necessary. Gap: 0.7-0.8 mm. |
| Air Filter | Check: 25-50 hours or after each ride in dusty/muddy conditions | Clean or replace if damaged or excessively dirty. Clean air box during each filter change. |
| Coolant | Level check: before every ride. Replacement: 100 hours or annually | Check level when cold and hose condition. Add as necessary. Replace at least once per season. |
Maintenance intervals are based on general information and may not be 100% accurate. Please consult your model's official owner's manual for precise details.