KFI Glacier Plow Mount for Polaris Ranger

Please Note

• This adapter is NOT compatible with the original Round Style Push Tubes (P/N 105635)
• The glacier bar height is critical. We recommend measuring the glacier bar when your machine is set up the way you like, if the measurement is 17" (+/- 1"), then this is the correct adapter for you. See image for reference.

This KFI Glacier Adapter is designed to be permanently attached to the UTV Push Tubes (P/N 106300) and keeps the plow mount off of your machine during spring, summer and fall.

Improper geometry can lead to a bad blade angle and/or force being applied incorrectly. The glacier bar height is critical. We recommend measuring the glacier bar when your machine is set up the way you like, if the measurement is 17" (+/- 1"), then this is the correct adapter for you. See image below for reference.

If fitment for your machine is not listed for this adapter, but you have a glacier bumper that matches the measurements shown in the photo below, you can use this Glacier Adapter based on your height.

Please Note

• This adapter is NOT compatible with the Round Style Push Tubes (P/N 105635)
• The glacier bar height is critical. We recommend measuring the glacier bar when your machine is set up the way you like, if the measurement is 14" (+/- 1"), then this is the correct adapter for you. See image for reference.

This KFI Glacier Adapter is designed to be permanently attached to the UTV Push Tubes (P/N 106300) and keeps the plow mount off of your machine during spring, summer and fall.

Improper geometry can lead to a bad blade angle and/or force being applied incorrectly. The glacier bar height is critical. We recommend measuring the glacier bar when your machine is set up the way you like, if the measurement is 14" (+/- 1"), then this is the correct adapter for you. See image for reference.

If your machine is not listed in the fitment for this adapter, but you have a glacier bumper that matches the measurements shown in the photo below, you can use this Glacier Adapter based on your height.

This adapter is NOT compatible with the Round Style Push Tubes (105635), If you have the Round Style Push Tubes, the Standard Height Glacier Adapter you would need is P/N 105975.

Please Note

• ONLY compatible with the Round Style Push Tubes (P/N 105635)
• The glacier bar height is critical.  The optimal height of this Std. Glacier Adapter mounting location should be 14” from the ground. See image for reference.

This KFI Glacier Adapter is designed to be permanently attached to the Round Style UTV Push Tubes (P/N 105635) and keeps the plow mount off of your machine during spring, summer and fall. Designed for the listed “stock” Full-Size Polaris Rangers with the Glacier Bumper installed. Mid-Size Polaris Machines (unless modified) are too low to use the current Glacier Adapters properly. Ensure the correct Glacier Adapter is ordered for your push tubes. This Standard Mount Adapter is ONLY compatible with the Round Style Push Tubes (P/N 105635). If you have the Pro 2.0 Square Style Push Tubes, you would need to look at our 2.0 Options.

The glacier bar height is critical. If your machine is listed, but you have (or are going to install) tracks, larger tires, or a lift kit, an alternate mount may be available for your machine that will be compatible with our push tube leveling kits.

Improper geometry can lead to a bad blade angle and/or force being applied incorrectly. The optimal height of the 105975 Std. Glacier Adapter mounting location should be 14” from the ground. See image for reference.

If your machine isn’t listed, but you have the Round Style Push Tubes and a glacier bumper that matches the measurements shown in the image above, you can use the corresponding Glacier Adapter based on your height.