Since 2008
Low Price Guarantee
Easy Returns
Fast Shipping
Product Details
Features
- Available with billet or cast aluminum housing
- Cool, quiet, precision-ground gears made from 9310 alloy billet steel
- Increases width by 3” per side (6” total)
- 1.5” diameter 4340 hardened steel drive shaft
- No leak bearings and seals
- Universal hub fits all major bolt patterns
- Comes complete with all hardware, backing plates, brakes lines and instructions
Wheel Requirements
- 18” or larger wheel required
- 18” wheels cannot exceed 4-1/2” backspacing (ZForce 950 HO EX)
- 18" wheels cannot exceed 5” backspacing (ZForce 950 Sport/Sport 4)
- 20” and larger wheels cannot exceed 5” backspacing
- Wheels need to have a center hole of at least 3.25" (82.55mm) or require a 1” wheel spacer
CFMOTO ZForce 950 HO EX 6” Portal Gear Lift Includes
- (4) Assembled portal hub complete with 9310 gears, seals, output shaft, advanced gaskets, and thrust bearings
- (4) Universal hubs and stainless steel slotted rotors with lugs
- (4) Specialized steel alloy backing plates
- (4) Steel caliper mounting plates
- (1) Front caliper adapter
- (1) Rear caliper adapter
- (6) Shims
- (6) Extended brake lines
- All required hardware, including recessed castle nut socket
CFMOTO ZForce 950 Sport 6” Portal Gear Lift Includes:
- (4) Assembled portal hub complete with 9310 gears, seals, output shaft, advanced gaskets, and thrust bearings
- (4) Universal hubs and stainless steel slotted rotors with lugs
- (4) Specialized steel alloy backing plates
- (4) Steel caliper mounting plates
- (2) Front caliper adapters
- (2) Rear caliper adapters
- (4) A-arm mounts
- (8) Shims
- Extended brake lines
- All required hardware, including recessed castle nut socket
Revamp Your Ride with GDP Portals
Turn your CFMOTO ZForce 950 into a powerhouse with SuperATV’s 6” GDP Portal Gear Lift. These portals are the strongest, most trusted in the industry. With a built-in gear reduction and a full 6” lift, they give your ZForce more torque, clearance, and the ability to run massive tires. You can pick a 30% or 45% gear reduction, and for maximum strength, upgrade from cast to billet aluminum portal housings.
Built for Extreme Terrain
Whether you’re tackling mud pits, rock gardens, or steep trails, our CFMOTO ZForce 950 portals deliver the performance you need. The 30% gear reduction boosts your torque without killing top speed—perfect a balanced performance profile. If you’re serious about running oversized tires and crushing mud or rocks, go with the 45% gear reduction for unstoppable pulling power and acceleration.
Protect Your Drivetrain
Unlike gear reductions in the transmission, GDP Portals move the reduction to the hub. That takes stress off your axles, prop shaft, differential, and transmission—you can push your ZForce 950 harder without worrying about premature drivetrain wear. Less strain means more durability and fewer costly repairs.
The Strength You Deserve
Our GDP Portals are built to last, so you can ride as rough as you want! Choose between cast or 6061 billet aluminum housing. Combine that with our 5/16” backing plates made from advanced steel alloy and you’re getting the best portals in the industry.
- Our housings are reinforced for gear retention and optimized for oil flow
- Advanced steel alloy backing plates are stronger than chromoly
- Enhance with Portal Blood—gear oil formulated for GDP Portals
- There are no gimmicks and no vents because vents do more harm than good—we know because we tested them
Advanced Gaskets, Seals, and Bearings - Our portals use
- Advanced gaskets and O-rings with excellent oil resistance and low deterioration rates
- A sealed input gear and double-lipped output seal
- 100% sealing coverage throughout so you can forget about oil leaks
- Double-angular contact output bearings to prevent premature wear
- Roller idler and drive bearings to maintain perfect gear meshing
Features
- Available with billet or cast aluminum housing
- Cool, quiet, precision-ground gears made from 9310 alloy billet steel
- Increases width by 3” per side (6” total)
- 1.5” diameter 4340 hardened steel drive shaft
- No leak bearings and seals
- Universal hub fits all major bolt patterns
- Comes complete with all hardware, backing plates, brakes lines and instructions
Wheel Requirements
- 18” or larger wheel required
- 18” wheels cannot exceed 4-1/2” backspacing (ZForce 950 HO EX)
- 18" wheels cannot exceed 5” backspacing (ZForce 950 Sport/Sport 4)
- 20” and larger wheels cannot exceed 5” backspacing
- Wheels need to have a center hole of at least 3.25" (82.55mm) or require a 1” wheel spacer
CFMOTO ZForce 950 HO EX 6” Portal Gear Lift Includes
- (4) Assembled portal hub complete with 9310 gears, seals, output shaft, advanced gaskets, and thrust bearings
- (4) Universal hubs and stainless steel slotted rotors with lugs
- (4) Specialized steel alloy backing plates
- (4) Steel caliper mounting plates
- (1) Front caliper adapter
- (1) Rear caliper adapter
- (6) Shims
- (6) Extended brake lines
- All required hardware, including recessed castle nut socket
CFMOTO ZForce 950 Sport 6” Portal Gear Lift Includes:
- (4) Assembled portal hub complete with 9310 gears, seals, output shaft, advanced gaskets, and thrust bearings
- (4) Universal hubs and stainless steel slotted rotors with lugs
- (4) Specialized steel alloy backing plates
- (4) Steel caliper mounting plates
- (2) Front caliper adapters
- (2) Rear caliper adapters
- (4) A-arm mounts
- (8) Shims
- Extended brake lines
- All required hardware, including recessed castle nut socket
Revamp Your Ride with GDP Portals
Turn your CFMOTO ZForce 950 into a powerhouse with SuperATV’s 6” GDP Portal Gear Lift. These portals are the strongest, most trusted in the industry. With a built-in gear reduction and a full 6” lift, they give your ZForce more torque, clearance, and the ability to run massive tires. You can pick a 30% or 45% gear reduction, and for maximum strength, upgrade from cast to billet aluminum portal housings.
Built for Extreme Terrain
Whether you’re tackling mud pits, rock gardens, or steep trails, our CFMOTO ZForce 950 portals deliver the performance you need. The 30% gear reduction boosts your torque without killing top speed—perfect a balanced performance profile. If you’re serious about running oversized tires and crushing mud or rocks, go with the 45% gear reduction for unstoppable pulling power and acceleration.
Protect Your Drivetrain
Unlike gear reductions in the transmission, GDP Portals move the reduction to the hub. That takes stress off your axles, prop shaft, differential, and transmission—you can push your ZForce 950 harder without worrying about premature drivetrain wear. Less strain means more durability and fewer costly repairs.
The Strength You Deserve
Our GDP Portals are built to last, so you can ride as rough as you want! Choose between cast or 6061 billet aluminum housing. Combine that with our 5/16” backing plates made from advanced steel alloy and you’re getting the best portals in the industry.
- Our housings are reinforced for gear retention and optimized for oil flow
- Advanced steel alloy backing plates are stronger than chromoly
- Enhance with Portal Blood—gear oil formulated for GDP Portals
- There are no gimmicks and no vents because vents do more harm than good—we know because we tested them
Advanced Gaskets, Seals, and Bearings - Our portals use
- Advanced gaskets and O-rings with excellent oil resistance and low deterioration rates
- A sealed input gear and double-lipped output seal
- 100% sealing coverage throughout so you can forget about oil leaks
- Double-angular contact output bearings to prevent premature wear
- Roller idler and drive bearings to maintain perfect gear meshing
