Super ATV Frame Stiffener Support

Features

• Made of 4.5 mm heavy-duty steel plating
• Strengthens the weak spots on your machine’s frame
• Saves your frame when you add heavy tires or other unsprung weight
• Adds support and stability
• Powder coated for durability
• Perfect for use with GDP Portals and big tires

Protect Your Pioneer’s Frame
Your Honda Pioneer 1000-6 is more than a workhorse. On the weekends, it’s a party animal! If you like to hit the trail hard on your time off, we don’t blame you—but don’t be surprised if all those big whoops damage your frame. Get SuperATV’s Frame Stiffener to get peace of mind when you’re pulling wild antics.

Reduce Unnecessary Stress on Your Rig’s Frame
If you’re planning on making major, heavy upgrades, you need a frame stiffener. Your stock frame wasn’t built to handle the weight from a portal gear lift or monster tires. Protect your Pioneer from unnecessary stress with our frame stiffening gusset kit and you’ll be able to keep that bad boy on the trail for years to come.

4.5 mm Steel Construction
We built this frame stiffener with beefy 4.5 mm hand-welded steel. You’ll never have to worry about bending your chassis or throwing your rig out of alignment again. And it’s powder coated to resist rust and corrosion that could weaken the frame stiffener over time. Get our frame stiffener and keep your machine ready to rock.

Features

• Strengthens the weak spots on your Pioneer 1000’s frame
• Provides the strength you need when adding portals, big lifts, or bigger tires
• Perfect for hard work and hard riding
• Adds support and stability
• Made of 4.5 mm heavy-duty steel plating
• Powder coated for durability

Are you ready to take your Honda Pioneer 1000 and 1000-5 to the next level with a big lift, portals, and bigger tires? Then you need a SuperATV Frame Stiffener to keep your stock frame from bending under all the weight. Now you lift and load, tweak and torque without bending your machine out of shape.

Go Big
Take your Honda Pioneer 1000 to the limit with a frame stiffener that eliminates the weak spots on your OEM frame. Those 40” tires you’ve got your eye on are going to take a big lift, and unless you plan on leaving it parked on your front lawn your machine will buckle without some extra support. A frame stiffener lets you go as big as you want, hit the obstacles you want, and drive as hard as you want.

Superior Strength
Our frame support is made with 4.5 mm heavy-duty steel to make sure your Pioneer 1000 has the best frame support possible. Don't be afraid of bending your chassis and throwing your machine out of alignment - get SuperATV's Frame Stiffener for the Honda Pioneer and show the trail who's boss.

Features

• Strengthens the weak spots on your Pioneer 1000’s frame
• Provides the strength you need when adding portals, big lifts, or bigger tires
• Perfect for hard work and hard riding
• Adds support and stability
• Made of 4.5 mm heavy-duty steel plating
• Powder coated for durability

Are you ready to take your Honda Pioneer 1000 and 1000-5 to the next level with a big lift, portals, and bigger tires? Then you need a SuperATV Frame Stiffener to keep your stock frame from bending under all the weight. Now you lift and load, tweak and torque without bending your machine out of shape.

Go Big
Take your Honda Pioneer 1000 to the limit with a frame stiffener that eliminates the weak spots on your OEM frame. Those 40” tires you’ve got your eye on are going to take a big lift, and unless you plan on leaving it parked on your front lawn your machine will buckle without some extra support. A frame stiffener lets you go as big as you want, hit the obstacles you want, and drive as hard as you want.

Superior Strength
Our frame support is made with 4.5 mm heavy-duty steel to make sure your Pioneer 1000 has the best frame support possible. Don't be afraid of bending your chassis and throwing your machine out of alignment - get SuperATV's Frame Stiffener for the Honda Pioneer and show the trail who's boss.

Features

• Made of 4.5 mm heavy-duty steel plating
• Strengthens the weak spots on your Talon’s frame
• Saves your frame when you add heavy tires or other unsprung weight
• Adds support and stability
• Powder coated for durability

Go Big & Ride Hard
You’re a no-holds-barred kind of rider. That means you like to keep your Honda Talon’s pedal down when you’re flying into killer ruts and huge rocks, but hitting one the wrong way can permanently tweak your UTV’s frame. You need SuperATV‘s Frame Stiffener for the Honda Talon 1000R and 1000X to make sure your UTV is up to the task. When you add huge tires, you add a ton of weight that makes every bump hit harder and you transfer a lot more torque to your frame every time you hit the gas. Our frame-stiffening gusset kit will keep your stock frame from deforming under extreme riding conditions. Now you can lift and load, tweak and torque without bending your machine out of shape.

Superior Strength
Our frame support is made with 4.5 mm heavy-duty hand-welded steel to make sure your UTV has the best frame support possible. Don't be afraid of bending your chassis and throwing your machine out of alignment—get SuperATV's Frame Stiffener for the Honda Talon and dominate the outdoors.

Please Note

• Not compatible with SATV full skid plate P/N FSP-P-RZR1K or FSP-P-RZRXPT
• When running this frame stiffener with the Polaris RZR Trail 900 Full Skid Plate , the frame stiffener will replace the front section of the skid plate

Features

• Made of 4.5 mm heavy-duty steel plating
• Strengthens the weak spots on your RZR Trail 900’s frame
• Saves your frame when you add heavy tires or other unsprung weight
• Adds support and stability
• Powder coated for durability

Strengthen Your Frame
Your Polaris RZR Trail 900 is built for rugged riding, but every machine has its limits. Unless you’re prepared to risk bending your chassis or throwing your machine out of alignment, you don’t want to test those limits without having the right aftermarket frame support. SuperATV’s Frame Stiffener/Gusset Kit strengthens your frame, eliminating weak spots and delivering the peace of mind you need to take on bigger whoops and wilder bounty holes.

Made with Premium Materials
We believe that better materials lead to a stronger product, which is why we make this UTV frame stiffener with 4.5 mm heavy-duty steel plating. A powder-coat finish adds longevity and durability. Our choice in materials, combined with expert engineering, makes this frame stiffener and gusset kit the strongest and most reliable frame support you can get.

Please Note

• Not compatible with SATV full skid plate P/N FSP-P-RZR1K or FSP-P-RZRXPT
• When running this frame stiffener with the Polaris RZR Trail S 900 Full Skid Plate, the frame stiffener will replace the front section of the skid plate.
  

Features

• Made of 4.5 mm heavy-duty steel plating
• Strengthens the weak spots on your RZR Trail S 900’s frame
• Saves your frame when you add heavy tires or other unsprung weight
• Adds support and stability
• Powder coated for durability

Worry-Free Riding
Big lifts and bigger tires make every ride more fun! But your frame might struggle to keep up with all of that extra weight, especially when the trails get rough—one wrong bump can throw your machine out of alignment. Eliminate that worry and reinforce the frame of your Polaris RZR Trail S 900 with a Frame Stiffener/Gusset Kit from SuperATV. This heavy-duty brace strengthens your machine’s weak points, giving you peace of mind during wild rides.

Heavy-Duty Steel Plating
Our frame stiffener and gusset kit keep your frame from buckling under the pressure of added weight and rough terrain. How does it do that? It all comes from premier materials and expert design. It’s made from 4.5 mm powder-coated steel plating for maximum durability. This UTV frame stiffener doesn’t just strengthen weak spots—it virtually eliminates them. Don’t ride without it.

Please Note

• Not compatible with SATV full skid plate P/N FSP-P-RZR1K or FSP-P-RZRXPT
• When running this frame stiffener with the Polaris RZR Trail S 1000 Full Skid Plate, the frame stiffener will replace the front section of the skid plate

Features

• Made of 4.5 mm heavy-duty steel plating
• Strengthens the weak spots on your RZR Trail S 1000’s frame
• Saves your frame when you add heavy tires or other unsprung weight
• Adds support and stability
• Powder coated for durability

Don’t Wreck Your Chassis
Going big and riding hard is all fun and games until you realize your stock frame isn’t quite cut out for it. Without the right support, one wrong bump can sideline your machine. That’s why you need SuperATV’s Frame Stiffener/Gusset Kit for your Polaris RZR Trail S 1000. It lays the groundwork for going big with tires, portals, lifts, and more. You won’t find this kind of frame support anywhere else.

Eliminate Weak Spots
Looking for industry-leading strength? You’re in the right place! We use heavy-duty 4.5 mm steel plating for this frame stiffener. It gives the support and stability you need to take on those rugged rides you love. It’s also powder coated for even more long-lasting durability. Our UTV frame stiffener can handle everything you throw at it and then some.

Please Note

• Not compatible with SATV full skid plate P/N FSP-P-RZR1K or FSP-P-RZRXPT

Features

• Strengthens the weak spots on your RZR's frame
• Provides the strength you need when adding portals, big lifts, or bigger tires
• Perfect for hard work and hard riding
• Adds support and stability
• Made of 4.5 mm heavy-duty steel plating
• Powder coated for durability
• Perfect for lifts, big tires, and portals

Enhanced Frame Support
You’re thinking about making your rig the biggest machine on the trail—portals and huge tires are the first things you want to add. That can be a lot of extra weight for your stock frame to support. Get more chassis support with SuperATV’s Polaris RZR S 1000 Frame Stiffener.

Load Up Your RZR with Big Accessories
With this frame stiffener in place, you can make your rig as big as you want. Throw on some 8” portals, huge tires, or a monster lift kit—this RZR S 1000 frame stiffener can handle the biggest upgrades you can think of.

Unbelievable RZR S 1000 Strength
Constructed from robust 4.5 mm heavy-duty steel, this frame stiffener gives your RZR all the support it needs and then some. With a powder coating for extra durability, you can ride for years knowing this frame stiffener will do its job.

Features

• Strengthens the weak spots on your General XP frame
• Provides the strength you need when adding portals, big lifts, or bigger tires
• Perfect for hard work and hard riding
• Adds support and stability
• Made of 4.5 mm heavy-duty steel plating
• Powder coated for durability

Why Not Go Bigger?
The list of things you could do if your General had bigger tires, a bigger lift, and bigger portals is endless. It's every rock crawler and mud extremist's dream—maximizing the size of every part of their machine. But your stock frame wasn't built to handle all the extra weight until you add SuperATV's Frame Stiffener to your Polaris General XP. It's the additional support you need to strengthen all the weak spots in your chassis when you want to run bigger parts.

Go Big or Go Home
Have you maxed out the size of your Polaris General? Go big or go home, right? Once you've added this frame stiffener to your machine, you can make things as big as you want without worrying that your rig won't be able to support your big change. Are you interested in a 6" lift kit, a GDP portal gear lift, or some monster tires? You don't have to hold back now—climb the biggest rocks and dive into the deepest mud holes, knowing that you now have the bragging rights to do so.

Unmatched Strength
We know this frame stiffener has big shoes to fill, so we've made it 4.5 mm thick and cut it from heavy-duty steel. We've powder coated it for durability and longevity, so you can ride for years without losing the added support. Install this General frame stiffener to your machine, knowing we've designed it with rough terrain and extreme rides in mind.

How Do You Know if You Need One?
How do you know you need a frame stiffener to reinforce your General's frame? Anytime you max out your ground clearance with a big lift or GDP portals, your frame will require extra support. It’s a practical upgrades that take your machine to the next level.

Please Note

• When running the Polaris RZR RS1 Frame Stiffener / Gusset Kit with the Polaris RZR RS1 Full Skid Plate, the frame stiffener will replace the front section of the skid plate.

Features

• Strengthens the weak spots on your RS1's frame
• Provides the strength you need when adding portals, big lifts, or bigger tires
• Perfect for hard work and hard riding
• Adds support and stability
• Made of 4.5 mm heavy-duty steel plating
• Powder coated for durability

Why We Make It
When you upgrade your Polaris RZR RS1 with a big lift, bigger tires, and some extra gear, your frame will start to buckle with every bump and bounce. That’s why you need SuperATV’s frame stiffener. It adds much needed reinforcement to your frame so it doesn’t bend with all the extra weight.

Go Big
With a frame stiffener installed, you can go as big as you want. Get a portal gear lift, monster tires, and whatever else you need and hit the trails and mud holes as hard as you want. With a SuperATV frame support — made of 4.5 mm heavy-duty steel plating — everything will stay ridged and aligned. Your RS1 won’t just be a massive lawn ornament that’s too fragile to take around the block — your UTV will be the ultimate trail monster.

Please Note

• Not compatible with SATV full skid plate P/N FSP-P-RZR1K or FSP-P-RZRXPT

Features

• Strengthens the weak spots on your RZR's frame
• Provides the strength you need when adding portals, big lifts, or bigger tires
• Perfect for hard work and hard riding
• Adds support and stability
• Made of 4.5 mm heavy-duty steel plating
• Powder coated for durability

Extra Chassis Support
It’s time—time to master the bounty the hole that put you under last year. With bigger tires, portals, and SuperATV’s Polaris RZR 900 Frame stiffener supporting your stock frame, there’s no way that bounty hole stands a chance.

• Provides extra support for your frame's weak points
• Made of 4.5 mm steel plating
• Perfect for lifts, big tires, and portals

Big Tires, Portals, and Lift Kits
If you want to do the impossible, you'll need the biggest and baddest RZR at the ride park. By adding a frame stiffener to your machine, you can add the biggest accessories you can find without worrying if your stock frame can handle the extra weight.

Tough Terrain Calls for Superior Construction
You can count on this frame stiffener to do its job. It’s super strong and made from 4.5 mm steel. It’s even powder coated for extra durability. This frame stiffener can handle the wildest rides and toughest terrains.

Fitment Note

• Does not fit Polaris General XP 1000 (20-24)
• Does not fit Polaris General XP 4 1000 (20-24)

Please Note

• When running the Polaris General Frame Stiffener / Gusset Kit with the Polaris General 4 Full Skid Plate, the frame stiffener will replace the front section of the skid plate

Features

• Designed to withstand extreme riding
• Constructed of tough 4.5mm thick carbon steel
• Powder coated for added durability

The SuperATV lower front suspension frame support is designed for those who ride long and ride hard. With this type of riding, the lower frame tabs tend to bend and distort - not strong enough to withstand the abuse. Constructed of carbon steel and powder coated for added durability, this frame support can take all the tough riding you can throw at it!

Please Note

• When running the Polaris Ranger XP Frame Stiffener / Gusset Kit with the Polaris Ranger Full Size Skid Plate, the frame stiffener will replace the front section of the skid plate

Features

• Strengthens the weak spots on your Ranger 1000's frame
• Provides the strength you need when adding portals, big lifts, or bigger tires
• Perfect for hard work and hard riding
• Adds support and stability
• Made of 4.5 mm heavy-duty steel plating
• Powder coated for durability

Unleash Your Machine’s Full Potential
By adding SuperATV’s Frame Stiffener to your Polaris Ranger 1000, you’re laying the groundwork for going big. We’re talking big tires, big lifts, and big portals. Your stock frame just isn’t cut out for that kind of weight, so if you really want to see what your Ranger 1000 can do, you need some extra support. Our front and rear frame stiffeners offer just that by strengthening the weak spots in your chassis so you can go as big as you want.

Go Big or Go Home
Once the weak spots in your machine’s frame are eliminated, you’re ready to hit the ground running with all the suspension upgrades your heart desires. Whether you’re thinking monster tires, a 6” lift kit, or a GDP portal gear lift (or why not all three?), SuperATV’s frame stiffener makes sure your Ranger 1000 can handle it. You’ll be tackling the rockiest, wildest terrain with confidence.

Unmatched Strength Keeps You Going
This kit is made with 4.5 mm heavy-duty steel, giving your Ranger 1000 all the frame support it needs and then some. It’s powder coated for durability and longevity, ensuring top-notch performance ride after ride. Forget about taking it easy for fear of bending your frame. Install this frame stiffener and gusset kit on your machine and you’re ready to hit the trails, no matter how hard the trails hit back.

Is a Front or Rear Frame Stiffener Right for You?
Do you need a front or rear frame stiffener to reinforce your Ranger? Maxing out your ground clearance with a big lift or GDP portals requires a front frame stiffer. Getting ultimate control with our RIDE System Rear Steering Kit requires a rear frame stiffer. Get both if you upgrade everything!

Features

• Made of 4.5 mm heavy-duty steel plating
• Strengthens the weak spots on your PRO XP’s frame
• Saves your frame when you add heavy tires or other unsprung weight
• Adds support and stability
• Powder coated for durability

Go Big & Ride Hard
You like to let all your horses loose on your RZR PRO XP. That means you keep the pedal down when you’re flying into killer ruts and huge rocks with monster tires. But hitting one the wrong way can permanently tweak your UTV’s frame. You need SuperATV‘s Frame Stiffener for the Polaris RZR PRO XP to make sure your UTV is up to the task.

Perfect for Big Tires and High Torque
When you add huge tires, you add a ton of weight that makes every bump hit harder and you transfer a lot more torque to your frame every time you hit the gas. Our frame stiffening gusset kit will keep your stock frame from deforming under extreme riding conditions. Now you can lift and load, tweak and torque, without bending your machine out of shape.

Superior Strength
Our frame support is made with 4.5 mm heavy-duty hand welded steel to make sure your UTV has the best frame support possible. Don't be afraid of bending your chassis and throwing your machine out of alignment—get SuperATV's Frame Stiffener for the PRO XP and dominate the outdoors.

Please Note

• When running the Polaris RZR XP Turbo S Frame Stiffener / Gusset Kit with the Polaris RZR XP Turbo S Full Skid Plate, the frame stiffener will replace the front section of the skid plate

Features

• Strengthens the weak spots on the frame of your RZR Turbo S
• Provides the strength you need when adding portals, big lifts, or bigger tires
• Perfect for hard work and hard riding
• Adds support and stability
• Made of 4.5 mm heavy duty steel plating
• Powder coated for durability

Why We Make It
Beef up your frame with a SuperATV Frame Stiffener for your Polaris RZR XP Turbo S so that you can go big. Big lifts, big tires, and big jumps — your stock machine would crumble under the stress of wild riding and those upgrades you know you want. SuperATV’s frame stiffener fixes that.

Go Big
Ready to install a portal gear lift, monster tires, and a big lift kit? If you want your UTV to be anything other than a lawn ornament with all that gear installed then you need our frame support. It lets you go big and ride hard without bending your frame over time. Go big and ride with confidence with a frame stiffener from SuperATV.

Please Note

• Not compatible with SATV full skid plate P/N FSP-P-RAN900 or FSP-P-RAN9004
• When running the Polaris Ranger XP Frame Stiffener / Gusset Kit with the Polaris Ranger Full Size Skid Plate, the frame stiffener will replace the front section of the skid plate

Features

• Made of 5 mm heavy-duty steel plating
• Strengthens your Ranger’s frame
• Saves your frame when you add heavy tires or other unsprung weight
• Adds support and stability
• Powder coated for durability

Bolster Your Frame
Your stock Polaris Ranger frame is only made to withstand so much. When you load it up with a big lift kit, portals, a RIDE System Rear Steering Kit, you need to reinforce your frame. Get SuperATV’s front or rear Frame Stiffener to bolster your machine, save your chassis, and ride like mad.

Go Big
With SuperATV's frame stiffener installed, you can strengthen those OEM weak spots on your chassis and go as big as you want without worrying about bending your frame. Want 8" portals? Go for it. A 6" lift? Or, just get both, slap on some huge tires, and hit the gas—our frame stiffeners can handle anything you throw at them and then some.

Do You Need a Front or Rear Frame Stiffener?
Which gusset kit will reinforce your Ranger the best? It depends on what you’re doing. If you’re lifting your machine, go with a front frame stiffener. If you’re adding a RIDE System Rear Steering Kit, get a rear frame stiffener. If you decide to live the dream with a rear steering kit and a big lift kit, get both!

Please Note

• Not compatible with SATV full skid plate P/N FSP-P-RZR1K or FSP-P-RZRXPT

Features

• Strengthens the weak spots on your RZR XP frame
• Provides the strength you need when adding portals, big lifts, or bigger tires
• Perfect for hard work and hard riding
• Adds support and stability
• Made of 4.5 mm heavy-duty steel plating
• Powder coated for durability

Add Support to Your Frame
Get the support and stability your RZR needs with SuperATV's Polaris RZR XP Turbo Frame Stiffener. It strengthens the weaker spots in your chassis for when you're running portals, bigger tires, and a lift kit.

Designed for the RZR’s Biggest Accessories
You don't have to explain why you want to go bigger—we get it. Once you attach this frame stiffener, you're free to go as big as you want with your setup. Toss on an 8" GDP portal gear lift or some huge tires, and you're primed to conquer the tallest rocks, tear through the gnarliest bounty holes, and cruise through deep water crossings without bending your frame.

Incredible Strength
Your stock from doesn’t have the strength to support the biggest accessories on the market. That's why we built this RZR XP Turbo frame stiffener from 4.5 mm thick steel. And because strength is only half the battle, it’s powder coated for extra durability.

Please Note

• Not compatible with SATV full skid plate P/N FSP-P-RZR1K or FSP-P-RZRXPT
  

Features

• Strengthens the weak spots on your RZR's frame
• Provides the strength you need when adding portals, big lifts, or bigger tires
• Perfect for hard work and hard riding
• Adds support and stability
• Made of 4.5 mm heavy-duty steel plating
• Powder coated for durability
• Perfect for lifts, big tires, and portals

Support Your RZR Stock Frame
By adding SuperATV’s Frame Stiffener to your Polaris RZR XP 1000, you’re laying the groundwork for going big. We’re talking big tires, big lifts, and big portals. Your stock frame just isn’t cut out for that kind of weight. Our frame stiffener will support your stock chassis' weak points.
Provides extra support for your frame's weak points

Go Big or Go Home
Once you’ve taken care of the weak spots in your RZR’s frame, you can add the biggest suspension upgrades you can think of. Whether you're thinking about rocking monster tires, an 8” lift kit, or even a GDP portal gear lift (or why not all three?), our frame stiffener guarantees your RZR XP 1000 can handle the load.

Unmatched RZR XP 1000 Strength
This frame stiffener has a big job to do. That's why we made it from 4.5 mm thick steel and powder coated it for long-lasting durability. You can ride for years without seeing rust or corrosion.

Why Do You Need One?
That’s a good question. Anytime you max out your ground clearance with a big lift or GDP portals, your frame requires extra support for the added weight and leverage. It’s a simple add-on that supports all your other accessories.

Please Note

• Not compatible with SATV full skid plate P/N FSP-P-RZR1K or FSP-P-RZRXPT
  

Features

• Strengthens the weak spots on your RZR's frame
• Provides the strength you need when adding portals, big lifts, or bigger tires
• Perfect for hard work and hard riding
• Adds support and stability
• Made of 4.5 mm heavy-duty steel plating
• Powder coated for durability
• Perfect for lifts, big tires, and portals

Support Your RZR Stock Frame
By adding SuperATV’s Frame Stiffener to your Polaris RZR XP 1000, you’re laying the groundwork for going big. We’re talking big tires, big lifts, and big portals. Your stock frame just isn’t cut out for that kind of weight. Our frame stiffener will support your stock chassis' weak points.
Provides extra support for your frame's weak points

Go Big or Go Home
Once you’ve taken care of the weak spots in your RZR’s frame, you can add the biggest suspension upgrades you can think of. Whether you're thinking about rocking monster tires, an 8” lift kit, or even a GDP portal gear lift (or why not all three?), our frame stiffener guarantees your RZR XP 1000 can handle the load.

Unmatched RZR XP 1000 Strength
This frame stiffener has a big job to do. That's why we made it from 4.5 mm thick steel and powder coated it for long-lasting durability. You can ride for years without seeing rust or corrosion.

Why Do You Need One?
That’s a good question. Anytime you max out your ground clearance with a big lift or GDP portals, your frame requires extra support for the added weight and leverage. It’s a simple add-on that supports all your other accessories.

Please Note

• When running the Polaris Ranger XP Frame Stiffener / Gusset Kit with the Polaris Ranger Full Size Skid Plate, the frame stiffener will replace the front section of the skid plate.
  

Features

• Made of 5 mm heavy-duty steel plating
• Strengthens your Ranger’s frame
• Saves your frame when you add heavy tires or other unsprung weight
• Adds support and stability
• Powder coated for durability

Bolster Your Frame
Your stock Polaris Ranger frame is only made to withstand so much. When you load it up with a big lift kit, portals, a RIDE System Rear Steering Kit, you need to reinforce your frame. Get SuperATV’s front or rear Frame Stiffener to bolster your machine, save your chassis, and ride like mad.

Go Big
With SuperATV's frame stiffener installed, you can strengthen those OEM weak spots on your chassis and go as big as you want without worrying about bending your frame. Want 8" portals? Go for it. A 6" lift? Or, just get both, slap on some huge tires, and hit the gas—our frame stiffeners can handle anything you throw at them and then some.

Do You Need a Front or Rear Frame Stiffener?
Which gusset kit will reinforce your Ranger the best? It depends on what you’re doing. If you’re lifting your machine, go with a front frame stiffener. If you’re adding a RIDE System Rear Steering Kit, get a rear frame stiffener. If you decide to live the dream with a rear steering kit and a big lift kit, get both!

Please Note

• Refer to image for fitment note

Why We Make It
Strengthen the frame on your Wildcat Trail! If your Trail lacks the gusset that was added in later models, this frame stiffener from SuperATV will give you the added strength you need to hit the trails hard!

Features

• Strengthens the weak spots on your Wolverine RMAX 1000’s frame
• Provides the strength you need when adding portals, big lifts, or bigger tires
• Perfect for hard work and hard riding
• Adds support and stability
• Made of 4.5 mm heavy-duty steel plating
• Powder coated for durability

Confidence on the Trail
We’ve all seen monstrous builds with tractor tires and portal gear lifts, but what you may not have noticed was the frame stiffener. If you want to beef up your UTV and play with the big kids, you need SuperATV’s Yamaha Wolverine RMAX 1000 Frame Stiffener. It strengthens the weak points on your frame so your Wolverine won’t buckle under pressure. A frame stiffener is the secret to transforming your Wolverine into the rig of your dreams without compromising its structural integrity.

Strength and Longevity
Our frame stiffener is made from heavy-duty steel plating that’s powder coated to prevent rust and corrosion. It’s made to put up with all kinds of abuse, even direct impact with boulders. The added support and stability strengthen your frame so you can make the upgrades you need to take on the roughest, nastiest trails.

Features

• Strengthens the weak spots on your Viking's frame
• Provides the strength you need when adding portals, big lifts, or bigger tires
• Perfect for hard work and hard riding
• Adds support and stability
• Made of 4.5 mm heavy-duty steel plating
• Powder coated for durability

Why We Make It
When it’s time to upgrade you Yamaha Viking VI with a big lift, big tires, and some extra gear, you’ll push right past what your stock UTV frame can handle. Get SuperATV’s Frame Stiffener for the Yamaha Viking so you don’t bend your frame when you hit the trail.

Go Big
SuperATV’s frame stiffener gives you the freedom to go big—bigger tires, bigger lifts, and big portal gear lifts without overtaxing your machine. Ride hard, ride high, ride however you want. Your machine is too good to be a lawn ornament. Just ride - our frame stiffener can handle anything you can throw at it and then some.

Superior Strength
Our frame support is made with 4.5 mm heavy duty hand-welded steel to make sure your Viking VI has the best frame support possible. Don't be afraid of bending your chassis and throwing your machine out of alignment - get SuperATV's Frame Stiffener for the Yamaha Viking and show the trail who's boss.

Fitment Note

• This Frame Stiffener requires SuperATV's Maverick Winch Mount (P/N WM-CA-MAV) Sold separately  https://revco.ca/super-atv-polaris-rzr-900-winch-mounting-plate/

Features

• Strengthens the weak spots on your Maverick's frame 
• Provides the strength you need when adding portals, big lifts, or bigger tires 
• Perfect for hard work and hard riding 
• Adds support and stability 
• Made of 6 mm heavy-duty steel plating 
• Powder coated for durability

The SuperATV frame stiffener for the Can-Am Maverick is designed for those who ride long and ride hard. With this type of riding, the lower frame tabs tend to bend and distort - not strong enough to withstand the abuse. Constructed of carbon steel and powder coated for added durability, this frame stiffener can take all the tough riding you can throw at it!

Go Big
SuperATV’s frame stiffener eliminates those weak spots on your chassis that make it unsuitable for big lifts and tires. Now, you can focus on going big instead of worrying about ruining your machine. Get a big lift kit, 6” Portals, and monster mud tires and let the party begin—our frame stiffener can handle it.

Superior Strength
We give your Maverick the backbone it needs by using 6 mm heavy duty hand-welded steel that’s strong enough to take all kinds of torture. Get SuperATV’s Frame Stiffener for the Can-Am Maverick so you can quit driving like a grandma.

Features

• Made of 4.5mm heavy-duty steel plating
• Strengthens the weak spots on your Commander’s frame
• Saves your frame when you add heavy tires or other unsprung weight
• Adds support and stability
• Powder coated for durability

Protection You Can’t Get Anywhere Else
Bending your frame out of whack is one of the easiest ways to bring your ride to an abrupt halt. Luckily, we can keep that from happening. SuperATV is the only place where you can find a Frame Stiffener/Gusset Kit for your Can-Am Commander. It strengthens the weak spots on your chassis, stabilizing your front end and delivering peace of mind along with machine protection. It’s everything you need to feel better about beating up on your favorite off-road toy.

Long-Lasting Reinforcement
Thanks to top-quality materials and expert engineering, this Can-Am frame stiffener is tough enough to handle whatever the trails throw your way. It’s made from heavy-duty steel plating that’s 4.5mm thick. A powder-coat finish makes it last even longer by preventing rust and corrosion. We laser cut each piece for a perfect fit to your Commander, and it’s all super easy to install. You’ll be enjoying a more stable ride in no time.

Features

• Made of 5mm heavy-duty steel plating
• Strengthens the weak spots on your Defender's frame
• Saves your frame when you add heavy tires or other unsprung weight
• Adds support and stability
• Powder coated for durability

Support and Stability
From the farm to the job site to the trails, your Can-Am Defender is built to perform under the harshest conditions. But one wrong bump can lead to disaster if you’re not careful. Avoid doing any permanent damage to your Defender’s frame with a heavy-duty Frame Stiffener from SuperATV. It strengthens the weak points in your frame, offering support and stability that you can’t get anywhere else. A frame stiffener is a must for anyone, but especially for riders who want to add portals or bigger tires.

Industry-Leading Strength
When it comes to industry-leading strength, the secret is in the materials. We make this frame stiffener using 5mm heavy-duty steel plating to offer maximum durability. It also gets powder coated for even more strength and longevity. Our choice in materials, combined with our expert engineering and manufacturing, gives you the protection and peace of mind needed for tough riding and hauling heavier loads.

Please Note

• When running the Can-Am Maverick X3 Frame Stiffener / Gusset Kit with the Can-Am Maverick X3 Full Skid Plate, the frame stiffener will replace the front section of the skid plate

Features

• Strengthens the front-end of your machine
• Adds support and stability
• Made of 4.5 mm heavy-duty steel plating
• Powder coated for durability

Get the support and stability you need for the front end of your Maverick X3 with a Frame Stiffener from SuperATV. We’ve seen too many X3 riders bend their frames by hitting a big jump, going through big whoops, or getting into fender benders. That’s why we designed this frame stiffener with heavy-duty 4.5 mm steel plates.

Why we make it
The sleek, stylish front end of the X3 means the front-end frame is smaller than it needs to be, and with all that power under the hood, it’s not surprising that racers and recreational riders alike are ending their rides with a bent chassis. That’s why we made our frame stiffener that picks up the slack and lets you ride hard with confidence.

Who's it for?
The SuperATV Maverick X3 Frame Stiffener is perfect for anyone that likes to go fast - especially over jumps and whoops – but it’s effective protection against unexpected front-end collisions as well. It happens. It will also protect your vehicle from damage due to over-loaded winching.

Please Note

• When running the Kawasaki Teryx Frame Stiffener / Gusset Kit with the Kawasaki Teryx Full Skid Plate, the frame stiffener will replace the front section of the skid plate

Features

• Strengthens the weak spots on your Kawasaki Teryx S frame
• Provides the strength you need when adding portals, big lifts, or bigger tires
• Perfect for hard work and hard riding
• Adds support and stability
• Made of 4.5 mm heavy-duty steel plating
• Powder coated for durability
• Perfect for lifts, big tires, and portals

Reinforce Your Teryx S Stock Frame
Want to go big with your Teryx S? Start by adding SuperATV’s Kawasaki Teryx S Frame Stiffener to support your stock frame. It's the support you need when you’re running bigger tires, a lift kit, or portals. Reinforce your stock frame’s weak points and ride as hard as you want knowing this frame stiffener will support your upgrades and hard riding.

Do More with Your Teryx S
Level up your Teryx S by adding massive upgrades like monster tires, an 8” lift kit, or a GDP Portal Gear Lift. With this frame stiffener installed, you can make your rig the biggest and baddest on the trail.

Strength You Can Count On
Supporting big upgrades is a lot of work and takes a lot of strength. That’s why this frame stiffener is made from 4.5 mm thick steel and powder coated for added durability. You’ll be able to ride for years before you ever see any rust or corrosion.  

Please Note

• When running the Kawasaki Teryx Frame Stiffener / Gusset Kit with the Kawasaki Teryx Full Skid Plate, the frame stiffener will replace the front section of the skid plate.

Features

• Strengthens the weak spots on your Teryx's frame
• Provides the strength you need when adding portals, big lifts, or bigger tires
• Perfect for hard work and hard riding
• Adds support and stability
• Made of 4.5 mm heavy duty steel plating
• Powder coated for durability

Why We Make It
For all the things that make your Teryx great, it’s frame is not one of them. That’s why we made a frame stiffener to let you run bigger tires, bigger lifts, and Portal Gear Lifts. With SuperATV’s frame stiffener, you can go as big as you want and put your machine through anything—we’ll keep your frame straight.

Go Big
Our Frame Support makes those weak spots on your chassis disappear and gives you a machine with the backbone it needs. That means you can go big with a 6” Portal Gear Lift and monster tires without worrying about your frame bending on every bump you hit. Throw caution to the wind—our frame support will keep you aligned.

Superior Strength
Our frame support is made with 4.5 mm heavy duty hand-welded steel to make sure your Teryx gets all the strength it was missing.  Don't be afraid of bending your chassis and throwing your machine out of alignment—get SuperATV's Frame Stiffener for the Kawasaki Teryx and show the trail who's boss. 

Features

• Made of 5 mm heavy-duty steel plating
• Strengthens your KRX’s frame
• Saves your frame when you add heavy tires or other unsprung weight
• Adds support and stability
• Powder coated for durability

Go Big & Ride Hard
The Kawasaki KRX is built to ride hard—it’s got a big suspension and beefy components. But even it has its limits. Hit the bounty hole too hard or take it too fast in the whoops and you could tweak your frame.. Permanently. That’s where SuperATV’s Frame Stiffener for the Kawasaki Teryx KRX 1000 comes in. It’ll make sure your UTV is up for big rocks and big jumps—all the stuff that adds up to big fun.

Perfect for Going Big
You know you want to go big with your KRX. Get a big lift, a big GDP Portal Gear Lift, and big tires and you’re ready to go right? Not quite. When you add a ton of weight it makes every bump hit harder and causes a huge amount of torque to transfer to your frame every time you hit the gas. Our frame stiffening gusset kit will keep your stock frame from deforming under extreme riding conditions. Now you can lift and load, tweak and torque, without bending your machine out of shape.

Superior Strength
Our frame support is made with 5 mm heavy-duty hand welded steel to make sure your UTV has the best frame support possible. Don't be afraid of bending your chassis and throwing your machine out of alignment—get SuperATV's Frame Stiffener for the KRX and be in charge of your ride.

Features

• Strengthens the weak spots on your Maverick R frame
• Provides the strength you need when adding portals, big lifts, or bigger tires
• Perfect for extreme rides
• Adds support and stability
• Made of 4.5 mm heavy-duty steel plating
• Powder coated for durability

Beef Up Your Can-Am Maverick R
The Maverick R is all about putting the pedal down and hitting the trail hard. But when you go big with a lift, heavy tires, and portals, you need our Can-Am Maverick R Frame Stiffener to beef up your chassis. It reinforces your frame and A-arm mounts so you can get wild without bending them out of shape.

Strength That Lets You Get Wild
When you reinforce your Maverick R’s weak spots, you get the freedom to make major upgrades. Add GDP Portals, a big lift kit, and monster tires—our Maverick R frame stiffener lets your ride hard with tons of weight without bending your frame.

Built to Be a Bulletproof Backbone
Your Maverick R has a lot of horsepower to throw around, so it needs a frame stiffener that can keep up. Ours is made from 4.5 mm thick steel and is brake-press bent for maximum stiffness and durability. It’s also powder coated to prevent corrosion. We made it tough enough to match your Maverick.