Super ATV Outfitter Roof Rack

NOTE: Not compatible with OEM roofs.

Features

• Made of powder-coated aluminum and steel tube
• Attaches to frame using heavy-duty clamps and brackets
• Adds approximately 12 square feet of storage space
• Mounting location for a light bar
• 4 locations for recessed cube lights
• Pairs perfectly with our Outfitter Bed Rack

Cargo load capacity

• 600 lb. static load
• 200 lb. dynamic load

More Storage Space for Your Defender
You get a lot of use out of your machine’s bed, but you still need more space for cargo. Get SuperATV’s Can-Am Defender Outfitter Roof Rack for maximum storage space. It’s the perfect spot to load up camping equipment, hunting gear, or supplies needed for your next big job.

• Plenty of latching points to secure cargo
• 4 locations to add recessed cube lights and space for a light bar
• Uses T-slotted framing rails
• Adds roughly 21 square feet of storage space
• Easy to install

Tons of Tie Downs and Locations for Lights
This roof rack is loaded with convenient features. It’s got four locations to add pod lights or recessed lights, and there’s space in the front for a light bar. From early mornings to late nights, you’ll be able to see clearly. The side panels are slotted, giving you plenty of locations to latch down your cargo. And grab handles on each side make it easy to load and unload the rack.

Adjustable T-Slotted Framing Rails
The T-slotted framing rails keep your cargo from scratching up your roof. And you can mount them on the upper or lower level depending on how you plan on using them. The lower level creates a handy, six-inch deep basket. The upper mounting position makes a flat platform perfect for carrying long cargo like ladders or lumber.

Made to Last
We designed this Outfitter Rack to last. It’s made with extruded aluminum, aluminum plate, steel tubing and brackets for maximum durability in a lightweight package. This rack won’t interfere with your roof, windshield, rear windshield, or headache rack.

Please Note

• Not compatible with OEM roof. ONLY compatible with SuperATV Aluminum Roof RF-CA-DEFMAX-002-00.

Features

• Made of powder-coated aluminum and steel tube
• Attaches to frame using heavy-duty clamps and brackets
• 2 basket positions
• 2 slat positions
• Removable front and rear plates
• Adds approximately 16 square feet of cargo space
• Locations to add recessed cube lights
• Pairs perfectly with our Outfitter Roof Rack and optional bed rack shelf

Cargo load capacity

• 600 lb. static load
• 200 lb. dynamic load

Maximize Storage Space
Your Defender has lots of cargo space, but that doesn’t mean you couldn’t use more. Get SuperATV’s Can-Am Defender MAX Outfitter Roof Rack to maximize your rig’s storage space. Whether you’re headed out to your favorite hunting spot, carting supplies around for work, or traveling on an overland adventure, our roof rack helps you get your gear where you need it.

Adjustable to Suit Your Cargo
Slotted side panels and side guards provide tons of latching points for securing cargo. At just under 6” high, the side panels keep your cargo from falling out but won’t make your Defender so tall that it’s hard to navigate. Plus, the front and rear side panels are removable and the T-slotted framing rails are adjustable so that you can load longer cargo—like ladders or kayaks—more easily. It even makes a great spot to add a small rooftop tent!

Add Lights
Convenient grab handles on each side help you access your new storage space without struggling to keep your balance. And this roof rack has four locations to add recessed lights and a space in the front to add a light bar, making it easy to see on early mornings or late nights.

Built to Last
At SuperATV, we pay attention to the little things—and this roof rack is no exception. It’s made from durable extruded aluminum and powder coated. Aluminum is lightweight so it won’t weigh your Defender down. And the powder coat prevents rust and corrosion. Durable T-slotted framing rails keep your cargo from scratching up your roof and prevent it from turning into a bucket when it rains. It fits your Defender perfectly and won’t interfere with roofs, windshields, headache racks, or other accessories.

NOTE: Not compatible with OEM roofs.

Features

• Made of 3/16” powder-coated aluminum and steel tube
• Attaches to frame using heavy-duty clamps and brackets
• Adds approximately 9 square feet of storage space
• Mounting location for a light bar
• 4 locations for recessed cube lights
• Pairs perfectly with our Outfitter Bed Rack

Cargo load capacity

• 600 lb. static load
• 200 lb. dynamic load

Reclaim Your Ranger’s Roof
There’s nothing more frustrating than having to leave some gear behind because you can’t make room. Get an additional nine square feet of storage space with SuperATV’s Polaris Ranger XP 570 Outfitter Roof Rack. You’ll finally have the extra room you need to bring all your cargo with you.

• Plenty of latching points to secure cargo
• 4 locations for recessed cube lights and space for a light bar
• Uses T-slotted framing rails
• Adds roughly 9 square feet of storage space
• Easy to install

Customize to Fit Your Gear
We designed this roof rack with 6” tall slotted side panels to keep your cargo secure. The slots make for perfect locations to latch down your stuff. And the front and rear panels are removable, making it easy to carry long cargo, like lumber or ladders. Our T-slotted framing rails can be mounted in upper or lower positions, transforming the rack from a basket to a platform, whatever works for you.

Convenient Grab Handles and Locations for Lights (Lights Sold Separately)
This Ranger XP 570 roof rack is loaded with lots of useful features. There’s a location in front to add a light bar and 4 locations for recessed lights. And the included grab handles make it easy to access your cargo even though it’s elevated.

Ranger Roof Rack Made from Aluminum
Our Outfitter Roof Racks are built to be strong with powder-coated 3/16” aluminum. It’s lightweight and won’t rust or corrode over time. And the T-slotted framing rails protect your roof from scratches caused by your cargo. Since it was designed with your Ranger in mind, it works well with most windshields and headache racks too.

NOTE: The Outfitter roof rack is only compatible with SuperATV’s ROOF-P-RAN1KXP4-00 roof.

Please Note

• The Outfitter roof rack is only compatible with SuperATV’s ROOF-P-RAN1KXP4-00 roof.

Features

• Made of 3/16” powder-coated aluminum and steel tube
• Attaches to frame using heavy-duty clamps and brackets
• Adds approximately 21 square feet of storage space
• Mounting location for a light bar
• 4 locations for recessed cube lights
• Pairs perfectly with our Outfitter Bed Rack

Cargo load capacity

• 600 lb. static load
• 200 lb. dynamic load

More Space to Haul Cargo
Your rig may have lots of bed space, but you have lots of junk (er, equipment) to haul around! Upgrade your machine with SuperATV’s Polaris Ranger's Crew Outfitter Roof Rack. It’s the ideal add-on to give you the space you need to haul cargo to camp, supplies to the hunting spot, or equipment to the job site. Work or play, this roof rack will help you get your stuff where you need it.

• Plenty of latching points to secure cargo
• 4 locations for recessed cube lights and space for a light bar
• Uses T-slotted framing rails
• Adds roughly 21 square feet of storage space
• Easy to install

Adjusts to Suit Your Needs
The slotted side panels are perfect for securing cargo. They’re just over 6” high, so nothing will slide out the sides. The front and rear side panels are removable. And the T-slotted framing rails are adjustable. That means you can load longer cargo (think ladders, lumber, etc.) without issues. It even makes for a decent spot to mount a small rooftop tent!

4 Locations to Add Recessed Lights and 1 for a Lightbar (Sold Separately)
Each side of this roof rack has convenient grab handles. They make it way easier to load and unload cargo without straining. There are four locations for recessed cube lights and a spot on the front for a light bar too. Loading cargo during early mornings and late nights just got way easier.

Built with Powder-Coated Aluminum
We don’t cut corners at SuperATV. We made this roof rack from aluminum to make it lightweight, strong, and durable. It’s covered top to bottom with a powder coat too, making it resistant to rust and corrosion. And the T-slotted framing rails keep your cargo from scratching up your roof. This roof rack was designed specifically for your Ranger, so it won’t interfere with roofs, windshields, headache racks, or other accessories either.

Features

• Made with extruded aluminum framing rails and 3/16” thick aluminum plating
• Attaches to frame using heavy-duty brackets
• Adds approximately 14 square feet of storage space
• Uses T-slotted framing rails
• Cargo load capacity 150 lb. (Up to 600 lb. while stationary)

Use Your RZR’s Roof Space for Storage
Your Polaris RZR dominates the trail in every way—except for storage. Once you’ve got butts in those second-row seats, you’ve go nowhere to put your stuff. Get SuperATV’s Outfitter Sport Roof Rack and solve that problem. It transforms the wasted space on your roof into a convenient storage area for hunting gear, camping supplies, and even tools for your next job.

• Adds 14 square feet of storage space
• Multiple latching points to secure cargo
• T-slotted framing rails prevent scratches on roof
• Compatible with most roofs, doors, windshields, and more

Side Panels Keep Cargo Secure
This roof has side panels with tons of tie-down points to keep your cargo from slipping off your roof during rough rides. And the side panels are tall enough to keep all your gear safely on the roof where it belongs—instead of on the trail behind you.

Contoured for a Seamless Look
Our roof rack actually looks like it belongs on your RZR. The sides are contoured to match the angles of your machine’s roof for a badass, seamless look.

Aluminum and Steel Construction
We built this roof rack to last with powder-coated aluminum. That means it’s tough as hell, but not super heavy. The T-slotted framing rails protect your roof from scratches and dings from your cargo. And it works with windshields, roofs, headache racks, and more.

NOTE: Not compatible with OEM roofs.

Features

• Made with extruded aluminum framing rails and 3/16” thick aluminum plating
• Attaches to frame using heavy-duty brackets
• Adds approximately 14 square feet of storage space
• Multiple latching points to secure cargo
• T-slotted framing rails prevent scratches on roof
• Compatible with most roofs, doors, windshields, and more

Cargo load capacity

• 600 lb. static load
• 200 lb. dynamic load

Get More Storage to Get More from Your RZR
You love your Polaris RZR S 900—until you realize there’s basically no room in that tiny bed for any of your stuff! Get space for all your gear with SuperATV’s Outfitter Sport Roof Rack. It gives you an additional 14 square feet of cargo room by taking advantage of unused space on your roof.

All the Latching Points You Need
When it comes to your RZR, latching points are just as important as cargo room—you don’t want your stuff falling off the roof, do you? You get tons of places to secure your gear thanks to our roof rack’s slotted sides. And the sides are just high enough to keep your cargo from slipping off.

Actually Looks Good on Your RZR
This roof rack is the perfect combo of form and function. The contoured side panels match your RZR’s good looks. That’s a big change from the ugly roof racks you’ll find elsewhere.

Built with Lightweight Aluminum
If you want your RZR to stay light on its feet, this is the roof rack for you. We built it with lightweight aluminum so it won’t weigh your machine down. And it’s powder-coated to provide resistance against rust and corrosion over time. This could be the last roof rack you ever buy.

NOTE: Not compatible with OEM roofs.

Please Note

• Only compatible with SuperATV Aluminum Roof ROOF-CF-UF1K-00 (Sold Separately)

Features

• Made of powder-coated aluminum and steel tube
• Attaches to frame using heavy-duty clamps and brackets
• 2 slat positions
• Removable front and rear plates
• Adds approximately 9.5 square feet of cargo space
• 2 locations for recessed cube lights (Sold separately)

Cargo load capacity

• 600 lb. static load
• 200 lb. dynamic load

Maximize Your Storage Capacity
Unleash the full potential of your CFMOTO UForce 1000’s storage capacity with SuperATV’s Outfitter Roof Rack. It enhances your rig’s cargo space, whether you're going on a hunting expedition, transporting work supplies, or cruising uncharted trails.
Multiple tie-down locations and adjustable framing
Add a light bar, cube lights, and more
Make It Your Own
We designed this roof rack with 6” tall slotted side panels to keep your cargo secure. The t- slots make for perfect locations to latch down your stuff, and accommodate most 2” t-slot accessories like bike racks, kayaks, and more. And because you may be hauling longer cargo, we’ve designed this rack so the front and rear panels are removable. Not to mention, the T-slotted framing rails can be mounted in upper or lower positions, transforming the rack from a basket to a platform, whatever works for you.
Add Lights to Your Rig
We're all about convenience—that’s why this roof rack features easy-to-reach handles on both sides. This lets you reach your extra storage space without worrying about losing your balance. Plus, it has four spots to add recessed lights, and space in the front to add a light bar for those late-night rides.
Top-Notch Construction
At SuperATV, we pay attention to the little things—that goes for this roof rack too. It's built with strong extruded aluminum and a rust-resistant powder coat. The aluminum keeps it light so your UForce doesn't feel bogged down, and the powder coat keeps it looking good by preventing corrosion. The T-slotted framing rails are tough enough to keep your cargo from scratching your roof, and they prevent it from holding water when it rains. It fits your UForce just right and won't mess with your windshields, headache rack, or any other add-ons.

Please Note

• Compatible with Super ATV Roof Only

Features

• Made of powder-coated 3/16” aluminum
• Attaches to frame using heavy-duty clamps and brackets
• Adds approximately 23 square feet of storage space
• Mounting location for a light bar
• 4 locations for recessed cube lights (sold separately)

Cargo load capacity:

• 600 lb. static load
• 200 lb. dynamic load

Even More Storage Space

You’ve become a pro at loading your UForce’s bed—there’s not a square inch wasted. What if we told you there’s still room for even more cargo? Equip your CFMOTO UForce 1000 XL with SuperATV’s Outfitter Roof Rack. It transforms your machine’s roof into 23 square feet of extra storage space! It’s the perfect place for hunting gear, camping supplies, or work equipment. Get even more from your UForce with SuperATV!

• Plenty of latching points to secure cargo
• Uses T-slotted framing rails
• Easy to install

Configure to Your Needs

This roof rack is designed to keep your gear secure. The 6” side panels keep cargo from sliding off the sides on sharp turns or steep climbs. The front and rear panels can be removed to make it easier to carry long cargo like ladders or lumber. And the T-slotted framing rails can be mounted in the upper or lower position—whatever works best for you. The rails are compatible with tons of accessories like kayak mounts. It’s easy to configure this rack to work for you.

Grab Handles and Locations for Lights

We’ve loaded our Outfitter Roof Rack with all kinds of handy features. You get four locations for recessed cube lights and space to mount a lightbar on the front. And the rack is equipped with convenient grab handles that make it way easier to load and unload cargo. When your gear is easy to see and access, you know you’ve got a great roof rack.

Powder-Coated Aluminum

Our roof rack is built to last. It’s constructed with lightweight powder-coated aluminum to prevent rust and corrosion. And it’s compatible with most windshields, doors, and headache racks. It’s designed to pair with SuperATV’s Aluminum Roof for a perfect fit.

NOTE: Not compatible with OEM roofs.

Features

• Made of powder-coated 3/16” aluminum
• Attaches to frame using heavy-duty clamps and brackets
• Adds approximately 26 square feet of storage space
• Location to mount a light bar
• 4 locations for recessed cube lights
• Pairs perfectly with our Outfitter Bed Rack

Cargo load capacity

• 600 lb. static load
• 200 lb. dynamic load

Get More Storage Space for Your Pioneer
You love your Honda Pioneer 1000-6, but your camping equipment, hunting gear, or tools have outgrown your bed space. Make use of the dead space on your roof with an Outfitter Roof Rack from SuperATV.

• Plenty of latching points to secure cargo
• 4 locations for recessed cube lights and space for a light bar
• Uses T-slotted framing rails
• Adds roughly 26 square feet of storage space
• Easy to install

Adjusts to Suit Your Needs
This roof rack is super adjustable. The front and rear panels are removable so you can easily transport long cargo, like ladders or lumber. The T-slots can be mounted in the upper or lower positions depending on how you want to carry your loads. And the 6” high side panels keep your cargo secure without making your machine so tall that it becomes hard to navigate.

Built-In Locations to Add Lights and More
We’ve preloaded this Pioneer roof rack with tons of handy features. There are four locations to add recessed lights and dedicated mounting points in front for a light bar. The driver- and passenger-side grab handles make it easy to load and unload gear. And the slotted sides provide tons of latching points to secure your cargo.

Built to Last with Aluminum
What good is a roof rack if it’s not strong? That’s why we build our Outfitter Roof Rack with durable, 3/16” powder-coated aluminum. Aluminum is lightweight and strong, making it the perfect material for a roof rack. And the T-slotted framing rails keep your cargo from scratching up your roof. This tough rack is compatible with most windshields, doors, and headache racks, so you’ll never have to choose between your favorite accessories.

Installs on Your Pioneer 1000-6 Easily
Our Outfitter Roof Racks are straightforward to install—just assemble the rack and connect it using the included brackets. We include all the hardware you need, saving you a trip to the hardware store. This roof rack will be ready to rock and roll in no time.

NOTE: Not compatible with OEM roofs.

Features

• Made of powder-coated 3/16” aluminum
• Attaches to frame using heavy-duty clamps and brackets
• Adds approximately 10 square feet of storage space
• Compatible with 30” or 40" light bar (Sold Separately)
• Compatible with most 2” T-slot accessories (bike racks, kayak mounts and many more)

Cargo load capacity

• 600 lb. static load
• 150 lb. dynamic load

Upgrade Your Storage Space with a Roof Rack
The Can-Am Maverick X3 may be top dog on the trail, but when it comes to storage space, it really falls short. Upgrade your rig with an Outfitter Sport Roof Rack from SuperATV. It gives you way more room—almost 10 square feet—for all kinds of cargo. And you can mount a 30” light bar on the front or rear of the rack.

• Plenty of latching points to secure cargo
• Adds roughly 10 square feet of storage space
• Uses T-slotted framing rails
• Easy to install

Keeps Your Cargo Secure
Thanks to the side panels, your gear and supplies are totally secure and won’t slip off even on quick turns. There are tons of latching points too, so you always have plenty of spots to tie down cargo.

Makes Your X3 Look Good
Our roof rack’s contoured side panels match your X3’s edgy look, giving you major points in the style department. That’s a big change from other X3 roof racks that look blocky and boring.

Durable Aluminum Construction
We built this roof rack with reliability in mind. It’s constructed from durable, 3/16” powder-coated aluminum to keep the weight down. The T-slotted framing rails protect your roof from scratches too. And it works with most windshields, roofs, and headache racks.

NOTE: Not compatible with OEM roofs.

Features

• Made of powder-coated 3/16” aluminum
• Attaches to frame using heavy-duty clamps and brackets
• Adds approximately 18 square feet of storage space
• Compatible with 30” or 40" light bar (Sold Separately)
• Compatible with most 2” T-slot accessories (bike racks, kayak mounts and many more)

Cargo load capacity

• 600 lb. static load
• 150 lb. dynamic load

Add More Storage Space with a Roof Rack
While the Can-Am Maverick X3 MAX performs on the trail, it lacks storage capacity. Push your Can-Am Maverick to its full potential with an Outfitter Sport Roof Rack. It provides nearly 18 square feet of additional space for your cargo. And you can install a 30" or 40" light bar on this rack.

• Plenty of latching points to secure cargo
• Adds roughly 18 square feet of storage space
• Uses T-slotted framing rails
• Easy to install

Keeps Your Cargo Secure
Thanks to our clever design, the side panels make sure your stuff stays in place, even when the trail gets rough. There are lots of latching points too—you'll never run out of space to tie down your things.

Makes Your Maverick X3 MAX Look Cool
This roof rack complements your Maverick's edge and sporty style. The uniquely shaped side panels sport the SuperATV logo and give it tons of style points. This rack may give you extra storage space, but our design saves you that big, blocky, and dull design that other roof racks have.

Strong Extruded Aluminum Build
We designed this roof rack to be tough but keep the weight down. It's made from strong, 3/16" powder-coated aluminum. The T-slotted framing rails protect your extruded aluminum roof from getting scratched up. And the rack works with most windshields, roofs, and headache racks.