Hot Rods Snowmobile Connecting Rod Kit

Features

• Heavy-duty OE replacement connecting rods
• Certified 8620 AISI steel provides superior strength
• Crankpins are manufactured from hot-rolled ASTM 4115 and case hardened to 58-62Rc
• Feature the latest in caged needle roller bearing designs for high rpm longevity
• Uniquely designed big end uses strategically located side scalloping and vent slots to minimize bearing race distortion at high rpm
• Small ends are double drilled to supply extra lubrication and cooling to the wrist pin bearing, which is especially important when the piston crown is close to the wrist pin bearing
• Shot-peened to eliminate surface stress risers and to smoothly blend together the rod forging's radiuses
• Double honing produces an ultra-round bearing surface for reliability at high rpm
• Most rod assemblies are sold complete with rod, crank pin, crank pin bearing, top-end bearing and silver-coated bronze phosphor thrust washers
• Compatible with Hot Rods and OE crankshafts

Technical Specifications

• Connecting Rod Big End I.D.: 36mm
• Connecting Rod Big End Width: 18mm
• Connecting Rod Center-to-Center: 127.900mm
• Connecting Rod Small End I.D.: 25mm
• Connecting Rod Small End Width: 18mm
• Engine Type: 2-Cycle
• Washer Thinkness: 1/1.20

Features

• Heavy-duty OE replacement connecting rods
• Certified 8620 AISI steel provides superior strength
• Crankpins are manufactured from hot-rolled ASTM 4115 and case hardened to 58-62Rc
• Feature the latest in caged needle roller bearing designs for high rpm longevity
• Uniquely designed big end uses strategically located side scalloping and vent slots to minimize bearing race distortion at high rpm
• Small ends are double drilled to supply extra lubrication and cooling to the wrist pin bearing, which is especially important when the piston crown is close to the wrist pin bearing
• Shot-peened to eliminate surface stress risers and to smoothly blend together the rod forging's radiuses
• Double honing produces an ultra-round bearing surface for reliability at high rpm
• Most rod assemblies are sold complete with rod, crank pin, crank pin bearing, top-end bearing and silver-coated bronze phosphor thrust washers
• Compatible with Hot Rods and OE crankshafts

Technical Specifications

• Connecting Rod Big End I.D.: 36mm
• Connecting Rod Big End Width: 18mm
• Connecting Rod Center-to-Center: 131.900mm
  
• Connecting Rod Small End I.D.: 27mm
• Connecting Rod Small End Width: 18mm
• Engine Type: 2-Cycle
• Washer Thinkness: 1/1.20

Features

• Heavy-duty OE replacement connecting rods
• Certified 8620 AISI steel provides superior strength
• Crankpins are manufactured from hot-rolled ASTM 4115 and case hardened to 58-62Rc
• Feature the latest in caged needle roller bearing designs for high rpm longevity
• Uniquely designed big end uses strategically located side scalloping and vent slots to minimize bearing race distortion at high rpm
• Small ends are double drilled to supply extra lubrication and cooling to the wrist pin bearing, which is especially important when the piston crown is close to the wrist pin bearing
• Shot-peened to eliminate surface stress risers and to smoothly blend together the rod forging's radiuses
• Double honing produces an ultra-round bearing surface for reliability at high rpm
• Most rod assemblies are sold complete with rod, crank pin, crank pin bearing, top-end bearing and silver-coated bronze phosphor thrust washers
• Compatible with Hot Rods and OE crankshafts

Technical Specifications

• Connecting Rod Big End I.D.: 35mm
• Connecting Rod Big End Width: 15.900mm
• Connecting Rod Center-to-Center: 136mm
• Connecting Rod Small End I.D.: 25mm
• Connecting Rod Small End Width: 15.900mm
• Engine Type: 2-Cycle
• Pin Length: 59.800mm
• Washer Thickness: 1mm

Features

• Heavy-duty OE replacement connecting rods
• Certified 8620 AISI steel provides superior strength
• Crankpins are manufactured from hot-rolled ASTM 4115 and case hardened to 58-62Rc
• Feature the latest in caged needle roller bearing designs for high rpm longevity
• Uniquely designed big end uses strategically located side scalloping and vent slots to minimize bearing race distortion at high rpm
• Small ends are double drilled to supply extra lubrication and cooling to the wrist pin bearing, which is especially important when the piston crown is close to the wrist pin bearing
• Shot-peened to eliminate surface stress risers and to smoothly blend together the rod forging's radiuses
• Double honing produces an ultra-round bearing surface for reliability at high rpm
• Most rod assemblies are sold complete with rod, crank pin, crank pin bearing, top-end bearing and silver-coated bronze phosphor thrust washers
• Compatible with Hot Rods and OE crankshafts

Technical Specifications

• Connecting Rod Big End I.D.: 32.300mm
• Connecting Rod Big End Width: 15.800mm
• Connecting Rod Center-to-Center: 112mm
• Connecting Rod Small End I.D.: 20mm
• Connecting Rod Small End Width: 15.800mm
• Engine Type: 2-Cycle
• Pin Length: 50.900mm
• Washer Thinkness: 1mm

Features

• Heavy-duty OE replacement connecting rods
• Certified 8620 AISI steel provides superior strength
• Crankpins are manufactured from hot-rolled ASTM 4115 and case hardened to 58-62Rc
• Feature the latest in caged needle roller bearing designs for high rpm longevity
• Uniquely designed big end uses strategically located side scalloping and vent slots to minimize bearing race distortion at high rpm
• Small ends are double drilled to supply extra lubrication and cooling to the wrist pin bearing, which is especially important when the piston crown is close to the wrist pin bearing
• Shot-peened to eliminate surface stress risers and to smoothly blend together the rod forging's radiuses
• Double honing produces an ultra-round bearing surface for reliability at high rpm
• Most rod assemblies are sold complete with rod, crank pin, crank pin bearing, top-end bearing and silver-coated bronze phosphor thrust washers
• Compatible with Hot Rods and OE crankshafts

Technical Specifications

• Connecting Rod Big End I.D.: 35mm
• Connecting Rod Big End Width: 18mm
• Connecting Rod Center-to-Center: 136mm
  
• Connecting Rod Small End I.D.: 27mm
• Connecting Rod Small End Width: 18mm
• Engine Type: 2-Cycle
• Pin Length: 60mm
• Washer Thinkness: 1mm

Features

• Heavy-duty OE replacement connecting rods
• Certified 8620 AISI steel provides superior strength
• Crankpins are manufactured from hot-rolled ASTM 4115 and case hardened to 58-62Rc
• Feature the latest in caged needle roller bearing designs for high rpm longevity
• Uniquely designed big end uses strategically located side scalloping and vent slots to minimize bearing race distortion at high rpm
• Small ends are double drilled to supply extra lubrication and cooling to the wrist pin bearing, which is especially important when the piston crown is close to the wrist pin bearing
• Shot-peened to eliminate surface stress risers and to smoothly blend together the rod forging's radiuses
• Double honing produces an ultra-round bearing surface for reliability at high rpm
• Most rod assemblies are sold complete with rod, crank pin, crank pin bearing, top-end bearing and silver-coated bronze phosphor thrust washers
• Compatible with Hot Rods and OE crankshafts

Technical Specifications

• Connecting Rod Big End I.D.: 30mm
• Connecting Rod Big End Width: 15mm
• Connecting Rod Center-to-Center: 120mm
• Connecting Rod Small End I.D.: 22mm
• Connecting Rod Small End Width: 15mm
• Engine Type: 2-Cycle
• Pin Length: 47.900mm
• Washer Thinkness: 1mm

Features

• Heavy-duty OE replacement connecting rods
• Certified 8620 AISI steel provides superior strength
• Crankpins are manufactured from hot-rolled ASTM 4115 and case hardened to 58-62Rc
• Feature the latest in caged needle roller bearing designs for high rpm longevity
• Uniquely designed big end uses strategically located side scalloping and vent slots to minimize bearing race distortion at high rpm
• Small ends are double drilled to supply extra lubrication and cooling to the wrist pin bearing, which is especially important when the piston crown is close to the wrist pin bearing
• Shot-peened to eliminate surface stress risers and to smoothly blend together the rod forging's radiuses
• Double honing produces an ultra-round bearing surface for reliability at high rpm
• Most rod assemblies are sold complete with rod, crank pin, crank pin bearing, top-end bearing and silver-coated bronze phosphor thrust washers
• Compatible with Hot Rods and OE crankshafts

Technical Specifications

• Big End Bearing (mm): 27x35x17.7
• Big End Bore (mm): 35.00
• Big End Width (mm): 17.90
• Center To Center (mm): 132.00
• Pin Diameter (mm): 27.00
• Pin Length (mm): 52.85
• Small End Bearing (mm): 20x25x22.65
• Small End Bore (mm): 25.00
• Small End Width (mm): 17.90
• Washer Thickness (mm): 1

Features

• Heavy-duty OE replacement connecting rods
• Certified 8620 AISI steel provides superior strength
• Crankpins are manufactured from hot-rolled ASTM 4115 and case hardened to 58-62Rc
• Feature the latest in caged needle roller bearing designs for high rpm longevity
• Uniquely designed big end uses strategically located side scalloping and vent slots to minimize bearing race distortion at high rpm
• Small ends are double drilled to supply extra lubrication and cooling to the wrist pin bearing, which is especially important when the piston crown is close to the wrist pin bearing
• Shot-peened to eliminate surface stress risers and to smoothly blend together the rod forging's radiuses
• Double honing produces an ultra-round bearing surface for reliability at high rpm
• Most rod assemblies are sold complete with rod, crank pin, crank pin bearing, top-end bearing and silver-coated bronze phosphor thrust washers
• Compatible with Hot Rods and OE crankshafts

Technical Specifications

• Connecting Rod Big End I.D.: 32mm
• Connecting Rod Big End Width: 20mm
• Connecting Rod Center-to-Center: 125mm
• Connecting Rod Small End I.D.: 25mm
• Connecting Rod Small End Width: 20mm
• Engine Type: 2-Cycle
• Washer thinkness: 2.500mm