RAM Mounts Tough-Ball Mirror Base for Harley-Davidson

This product is a Base. You may need to purchase other components to complete your setup.

The RAP-B-379-HA1U consists of a 1/4"-20 X 1" thread, connected to a 1" diameter ball, female blind barrel nut and nylon washer.

Fitment:

• CVO Road Glide (2009)
• CVO Road Glide Custom (12-15)
• CVO Road Glide Ultra (2011)
• CVO Road King (13-15)
• CVO Road King (2008)
• CVO Street Glide (10-12)
• CVO Ultra Classic (2010)
• CVO Ultra Classic Electra Glide(08-09)
• Electra Glide Classic (08-15)
• Electra Glide Standard (08-09)
• Electra Glide Ultra Limited (10-15)
• Road Glide (08-09)
• Road Glide Custom (10-15)
• Road Glide Custom Road Glide Ultra (2011)
• Road Glide Ultra (12-15)
• Road King (08-15)
• Road King Classic (08-15)
• Street Glide (08-15)
• Street Glide Trike (10-11)
• Tri Glide Ultra Classic (09-15)
• Ultra Classic Electra Glide (08-15)
  

• 1. Base can be mounted above or below mirror holes
• 2. Rubber ball dampens shock and vibration
• 3. High strength materials ensure product longevity
• 4. Lifetime warranty

Material:

• High Strength Composite & Steel

Ball Size:

• B Size 1" Rubber Ball

Installation Instructions:

• 1. Locate fairing mirror holes.
• 2. Place the nylon washer over the barrel nut. Insert the barrel nut into the hole on the controls.
• 3. Screw the threaded ball into the barrel nut from the other side of the hole. Tighten with 5/8" and 1/2" wrench.

Note:

• For bikes equipped with a hydraulic clutch, modification of the included washer may be required for proper installation.