null
COVID-19: Expect Delays - MORE DETAILS

Sno Stuff X-Calibar II Carbide Wear Rods

No Reviews yet Write a Review
$73.84
$91.95
(You save $18.11 )

In Stock

SKU: X2WEARRODS
Thank you! You will be notified by email once this product is in stock.
We are unable to process your request at this time. Please try again later.

Product Details

  • From Sno-Stuff, the original X-Calibar carbide wear rods
  • Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance
  • Longer studs work with ski skins
  • X-Calibar II feature four inches of 60º center carbide
  • One-inch carbide pads front and rear
  • Hardweld filler between front and rear carbide for added wear resistance
  • Sold in pair
  • From Sno-Stuff, the original X-Calibar carbide wear rods
  • Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance
  • Longer studs work with ski skins
  • X-Calibar II feature four inches of 60º center carbide
  • One-inch carbide pads front and rear
  • Hardweld filler between front and rear carbide for added wear resistance
  • NOTE: Some models require drilling extra hole(s) in skis to mount carbides

Dimensions:

  • Length/Diameter: 20-3/4 in./7/16 in.
  • Stud Diameter/Length: 3/8 in./2 in.
  • Number of Studs: 4

Stud Center Mounting Distance From:

  • Front to 1st: 2-1/4 in.
  • 1st to 2nd: 4-1/2 in.
  • 2nd to 3rd: 7 in.
  • 3rd to 4th: 4-1/2 in.
  • 4th to End: 1-3/4 in.
  • From Sno-Stuff, the original X-Calibar carbide wear rods
  • Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have
  • carbide wear pads for even more wear resistance
  • Longer studs work with ski skins
  • X-Calibar II feature four inches of 60º center carbide
  • One-inch carbide pads front and rear
  • Hardweld filler between front and rear carbide for added wear resistance
  • NOTE: Some models require drilling extra hole(s) in skis to mount carbides

Dimensions:

  • Length/Diameter: 24-1/4 in./7/16 in.
  • Stud Diameter/Length: 5/16 in./7/8 in.
  • Number of Studs: 3

Stud Center Mounting Distance From:

  • Front to 1st: 13-1/2 in.
  • 1st to 2nd: 5-1/4 in.
  • 2nd to 3rd: 4-1/2 in.
  • 3rd to End: 1-1/2 in.
  • From Sno-Stuff, the original X-Calibar carbide wear rods
  • Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance
  • Longer studs work with ski skins
  • X-Calibar II feature four inches of 60º center carbide
  • One-inch carbide pads front and rear
  • Hardweld filler between front and rear carbide for added wear resistance
  • NOTE: Some models require drilling extra hole(s) in skis to mount carbides

Dimensions:

  • Length/Diameter: 17-1/4 in./7/16 in.
  • Stud Diameter/Length: 5/16 in./1-7/8 in.
  • Number of Studs: 4

Stud Center Mounting Distance From:

  • Front to 1st: 2-1/4 in.
  • 1st to 2nd: 4-3/8 in.
  • 2nd to 3rd: 6-7/8 in.
  • 3rd to 4th: 2-3/4 in.
  • 4th to End: 1 in.
  • X-Calibar II feature four inches of 60º center carbide
  • 60º tapered carbide resists chipping
  • Hardweld filler between front and rear carbide for added wear resistance
  • NOTE: Some models require drilling extra hole(s) in skis to mount carbides

Dimensions:

  • Length/Diameter: 21 in./7/16 in.
  • Stud Diameter/Length: 5/16 in./1 in.
  • Number of Studs: 2

Stud Center Mounting Distance From:

  • Front to 1st: 10 in.
  • 1st to 2nd: 7 in.
  • 2nd to End: 4 5/8 in.

 

  • From Sno-Stuff, the original X-Calibar carbide wear rods
  • Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance
  • Longer studs work with ski skins
  • X-Calibar II feature four inches of 60º center carbide
  • One-inch carbide pads front and rear
  • Hardweld filler between front and rear carbide for added wear resistance

NOTE: Some models require drilling extra hole(s) in skis to mount carbides

NOTE: Wear rods replace the originals exactly on all models except those with E-Z Steer either as original equipment or installed later. For those models, the wear rods listed replace both the plate and the 2-stud, 14-3/4 in. wear rod with a 3-stud, 28 in. design. If you wish to retain the E-Z Steer plate, order part number 10533 for an X-Calibar I or part number 10610 for an X-Calibar III Plus design with 5 in. or 60º carbide. Both are 14-3/4 in. long

Dimensions:

  • Length/Diameter: 28 in./7/16 in.
  • Stud Diameter/Length: 5/16 in./7/8 in.
  • Number of Studs: 3

Stud Center Mounting Distance From:

  • Front to 1st: 13-1/4 in.
  • 1st to 2nd: 7 in.
  • 2nd to 3rd: 7 in.
  • 3rd to End: 3/4 in.
  • From Sno-Stuff, the original X-Calibar carbide wear rods
  • Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance
  • Longer studs work with ski skins
  • X-Calibar II feature four inches of 60º center carbide
  • One-inch carbide pads front and rear
  • Hardweld filler between front and rear carbide for added wear resistance
  • NOTE:Some models require drilling extra hole(s) in skis to mount carbides

Dimensions:

  • Length/Diameter: 17-1/2 in./7/16 in.
  • Stud Diameter/Length: 5/16 in./1 1/4 in.
  • Number of Studs: 3

Stud Center Mounting Distance From:

  • Front to 1st: 3-5/8 in.
  • 1st to 2nd: 7-1/8 in.
  • 2nd to 3rd: 4-5/8 in.
  • 3rd to End: 2-1/8 in.

 

  • From Sno-Stuff, the original X-Calibar carbide wear rods
  • Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance
  • Longer studs work with ski skins
  • X-Calibar II feature four inches of 60º center carbide
  • One-inch carbide pads front and rear
  • Hardweld filler between front and rear carbide for added wear resistance

NOTE: Some models require drilling extra hole(s) in skis to mount carbides

NOTE: Wear rods replace the originals exactly on all models except those with E-Z Steer either as original equipment or installed later. For those models, the wear rods listed replace both the plate and the 2-stud, 14-3/4 in. wear rod with a 3-stud, 28 in. design.

NOTE: Will not work on 2002 models with dual rods on one ski.

Dimensions:

  • Length/Diameter: 28-1/2 in./7/16 in.
  • Stud Diameter/Length: 5/16 in./1-1/2 in.
  • Number of Studs: 3

Stud Center Mounting Distance From:

  • Front to 1st: 12-3/4 in.
  • 1st to 2nd: 7 in.
  • 2nd to 3rd: 7 in.
  • 3rd to End: 1-3/4 in.

 

  • From Sno-Stuff, the original X-Calibar carbide wear rods
  • Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have
  • carbide wear pads for even more wear resistance
  • Longer studs work with ski skins
  • X-Calibar II feature four inches of 60º center carbide
  • One-inch carbide pads front and rear
  • Hardweld filler between front and rear carbide for added wear resistance

NOTE: Some models require drilling extra hole(s) in skis to mount carbides

NOTE: Wear rods replace the originals exactly on all models except those with E-Z Steer either as original equipment or installed later. For those models, the wear rods listed replace both the plate and the 2-stud, 14-3/4 in. wear rod with a 3-stud, 28 in. design. If you wish to retain the E-Z Steer plate, order part number 10533 for an X-Calibar I or part number 10610 for an X-Calibar III Plus design with 5 in. or 60º carbide. Both are 14-3/4 in. long

Dimensions:

  • Length/Diameter: 20-1/4 in./7/16 in.
  • Stud Diameter/Length: 3/8 in./2 in.
  • Number of Studs: 4

Stud Center Mounting Distance From:

  • Front to 1st: 2-7/8 in.
  • 1st to 2nd: 4 in.
  • 2nd to 3rd: 7-1/2 in.
  • 3rd to 4th: 4 in.
  • 4th to End: 1-7/8 in.

 

  • From Sno-Stuff, the original X-Calibar carbide wear rods
  • Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance
  • Longer studs work with ski skins
  • X-Calibar II feature four inches of 60º center carbide
  • One-inch carbide pads front and rear
  • Hardweld filler between front and rear carbide for added wear resistance
  • NOTE: Some models require drilling extra hole(s) in skis to mount carbides

Dimensions:

  • Length/Diameter: 13-1/8 in./7/16 in.
  • Stud Diameter/Length: 5/16 in./2 in.
  • Number of Studs: 2

Stud Center Mounting Distance From:

  • Front to 1st: 4-1/8 in.
  • 1st to 2nd: 6-1/4 in.
  • 2nd to End: 2-3/4 in.

 

  • From Sno-Stuff, the original X-Calibar carbide wear rods
  • Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance
  • Longer studs work with ski skins
  • X-Calibar II feature four inches of 60º center carbide
  • One-inch carbide pads front and rear
  • Hardweld filler between front and rear carbide for added wear resistance

Dimensions:

  • Length/Diameter: 15-5/8 in./1/2 in.
  • Stud Diameter/Length: 5/16 in./1-1/4 in.
  • Number of Studs: 3

Stud Center Mounting Distance From:

  • Front to 1st: 3-1/2 in.
  • 1st to 2nd: 6-7/8 in.
  • 2nd to 3rd: 2-7/8 in.
  • 3rd to End: 2-1/4 in.

 

  • From Sno-Stuff, the original X-Calibar carbide wear rods
  • Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have
  • carbide wear pads for even more wear resistance
  • Longer studs work with ski skins
  • X-Calibar II feature four inches of 60º center carbide
  • One-inch carbide pads front and rear
  • Hardweld filler between front and rear carbide for added wear resistance

NOTE: Some models require drilling extra hole(s) in skis to mount carbides

NOTE: Wear rods replace the originals exactly on all models except those with E-Z Steer either as original equipment or installed later. For those models, the wear rods listed replace both the plate and the 2-stud, 14-3/4 in. wear rod with a 3-stud, 28 in. design. If you wish to retain the E-Z Steer plate, order part number 10533 for an X-Calibar I or part number 10610 for an X-Calibar III Plus design with 5 in. or 60º carbide. Both are 14-3/4 in. long

Dimensions:

  • Length/Diameter: 25 in./7/16 in.
  • Stud Diameter/Length: Center Stud: 5/16 in./1-1/4 in.; End Stud: 5/16 in./1 in.
  • Number of Studs: 2

Stud Center Mounting Distance From:

  • Front to 1st: 13 in.
  • 1st to 2nd: 9-1/2 in.
  • 2nd to End: 2-1/2 in.

 

  • From Sno-Stuff, the original X-Calibar carbide wear rods
  • Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have
  • carbide wear pads for even more wear resistance
  • Longer studs work with ski skins
  • X-Calibar II feature four inches of 60º center carbide
  • One-inch carbide pads front and rear
  • Hardweld filler between front and rear carbide for added wear resistance

NOTE: Some models require drilling extra hole(s) in skis to mount carbides

NOTE: Wear rods replace the originals exactly on all models except those with E-Z Steer either as original equipment or installed later. For those models, the wear rods listed replace both the plate and the 2-stud, 14-3/4 in. wear rod with a 3-stud, 28 in. design. If you wish to retain the E-Z Steer plate, order part number 10533 for an X-Calibar I or part number 10610 for an X-Calibar III Plus design with 5 in. or 60º carbide. Both are 14-3/4 in. long

Dimensions:

  • Length/Diameter: 17-1/2 in./7/16 in.
  • Stud Diameter/Length: 3/8 in./1-7/8 in.
  • Number of Studs: 3

Stud Center Mounting Distance From:

  • Front to 1st: 2-1/2 in.
  • 1st to 2nd: 3-3/4 in.
  • 2nd to 3rd: 8-3/4 in.
  • 3rd to End: 2-1/2 in.

 

  • From Sno-Stuff, the original X-Calibar carbide wear rods
  • Longer studs work with ski skins
  • X-Calibar II feature four inches of 60° center carbide
  • One-inch carbide pads front and rear
  • 60° tapered carbide resists chipping
  • Hardweld filler between front and rear carbide for added wear resistance

NOTE: Some models require drilling extra hole(s) in skis to mount carbides

NOTE: Wear rods replace the originals exactly on all models except those with E-Z Steer either as original equipment or installed later. For those models, the wear rods listed replace both the plate and the 2-stud, 14-3/4 in. wear rod with a 3-stud, 28 in. design. If you wish to retain the E-Z Steer plate, order part number 10533 for an X-Calibar I or part number 10610 for an X-Calibar III Plus design with 5 in. or 60° carbide. Both are 14-3/4 in. long

Dimensions:

  • Length/Diameter: 20-1/2 in./7/16 in.
  • Stud Diameter/Length: 5/16 in./2 in.
  • Number of Studs: 4

Stud Center Mounting Distance From:

  • Front to 1st: 3 in.
  • 1st to 2nd: 3-9/16 in.
  • 2nd to 3rd: 7-1/8 in.
  • 3rd to 4th: 3-9/16 in.
  • 4th to End: 3-3/8 in.
  • From Sno-Stuff, the original X-Calibar carbide wear rods
  • Longer studs work with ski skins
  • X-Calibar II feature four inches of 60º center carbide
  • One-inch carbide pads front and rear
  • Hardweld filler between front and rear carbide for added wear resistance
  • NOTE: Some models require drilling extra hole(s) in skis to mount carbides

Dimensions:

  • Length/Diameter: 29-3/4 in./7/16 in.
  • Stud Diameter/Length: 5/16 in./7/8 in.
  • Number of Studs: 4

Stud Center Mounting Distance From:

  • Front to 1st: 1/2 in.
  • 1st to 2nd: 9-3/4 in.
  • 2nd to 3rd: 5-1/2 in.
  • 3rd to 4th: 13-3/4 in.
  • 4th to End: 1/4 in.

 

  • From Sno-Stuff, the original X-Calibar carbide wear rods
  • Bars feature various lengths of 60º; center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance
  • Longer studs work with ski skins
  • X-Calibar II feature four inches of 60º; center carbide
  • One-inch carbide pads front and rear
  • Hardweld filler between front and rear carbide for added wear resistance

NOTE: Some models require drilling extra hole(s) in skis to mount carbides

NOTE: Wear rods replace the originals exactly on all models except those with E-Z Steer either as original equipment or installed later. For those models, the wear rods listed replace both the plate and the 2-stud, 14-3/4 in. wear rod with a 3-stud, 28 in. design. If you wish to retain the E-Z Steer plate, order part number 10533 for an X-Calibar I or part number 10610 for an X-Calibar III Plus design with 5 in. or 60º; carbide. Both are 14-3/4 in. long

Dimensions:

  • Length x Diameter: 20-3/8 in. x 7/16 in.
  • Stud Diameter x Length: 5/16 in. x 1 in.
  • Number of Studs: 3

Stud Center Mounting Distance From:

  • Front to 1st: 3 in.
  • 1st to 2nd: 7-1/8 in.
  • 2nd to 3rd: 8-1/4 in.
  • 3rd to End: 2 in.

From Sno-Stuff, the original X-Calibar carbide wear rods

Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance

Longer studs work with ski skins

X-Calibar II feature four inches of 60º center carbide

One-inch carbide pads front and rear

Hardweld filler between front and rear carbide for added wear resistance

NOTE: Some models require drilling extra hole(s) in skis to mount carbides

NOTE: Wear rods replace the originals exactly on all models except those with E-Z Steer either as original equipment or installed later. For those models, the wear rods listed replace both the plate and the 2-stud, 14-3/4 in. wear rod with a 3-stud, 28 in. design. If you wish to retain the E-Z Steer plate, order part number 10533 for an X-Calibar I or part number 10610 for an X-Calibar III Plus design with 5 in. or 60º carbide. Both are 14-3/4 in. long

Dimensions:

  • Length/Diameter: 22-1/4 in./7/16 in.
  • Stud Diameter/Length: 5/16 in./7/8 in.
  • Number of Studs: 4

Stud Center Mounting Distance From:

  • Front to 1st: 2-1/2 in.
  • 1st to 2nd: 7 in.
  • 2nd to 3rd: 8-1/4 in.
  • 3rd to 4th: 4 in.
  • 4th to End: 1/2 in.

 

  • From Sno-Stuff, the original X-Calibar carbide wear rods
  • Bars feature various lengths of 60° center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance
  • All are painted to coordinate with the brand-neon green for Arctic Cat, purple for Polaris, yellow for Ski-Doo and red for
  • Yamaha (remove paint from studs for easier installation)
  • Longer studs work with ski skins
  • X-Calibar II feature four inches of 60° center carbide
  • One-inch carbide pads front and rear
  • 60° tapered carbide resists chipping
  • Hardweld filler between front and rear carbide for added wear resistance
  • NOTE: Some models require drilling extra hole(s) in skis to mount carbides

Dimensions:

  • Length x Diameter: 20-1/2 in. x 7/16 in.
  • Stud Diameter x Length: 5/16 in. x 2 in.
  • Number of Studs: 4

Stud Center Mounting Distance From:

    • Front to 1st: 3 in.
    • 1st to 2nd: 3-1/2 in.
    • 2nd to 3rd: 7 in.
    • 3rd to 4th: 3-1/2 in.
    • 4th to End: 3-1/4 in.
  • From Sno-Stuff, the original X-Calibar carbide wear rods
  • Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance
  • Longer studs work with ski skins
  • X-Calibar II feature four inches of 60º center carbide
  • One-inch carbide pads front and rear
  • Hardweld filler between front and rear carbide for added wear resistance

NOTE: Some models require drilling extra hole(s) in skis to mount carbides

NOTE: Wear rods replace the originals exactly on all models except those with E-Z Steer either as original equipment or installed later. For those models, the wear rods listed replace both the plate and the 2-stud, 14-3/4 in. wear rod with a 3-stud, 28 in. design. If you wish to retain the E-Z Steer plate, order part number 10533 for an X-Calibar I or part number 10610 for an X-Calibar III Plus design with 5 in. or 60º carbide. Both are 14-3/4 in. long

Dimensions:

  • Length/Diameter: 20-1/2 in./7/16 in.
  • Stud Diameter/Length: 5/16 in./7/8 in.
  • Number of Studs: 4

Stud Center Mounting Distance From:

  • Front to 1st: 6-1/2 in.
  • 1st to 2nd: 3 in.
  • 2nd to 3rd: 6-1/2 in.
  • 3rd to 4th: 3-1/2 in.
  • 4th to End: 1 in.

 

  • From Sno-Stuff, the original X-Calibar carbide wear rods
  • Longer studs work with ski skins
  • X-Calibar II feature four inches of 60º center carbide
  • One-inch carbide pads front and rear
  • Hardweld filler between front and rear carbide for added wear resistance


Fitment Note for Yamaha V-max 700 XTCP 1998

  • For models w/USI skis

NOTE: Some models require drilling extra hole(s) in skis to mount carbides

NOTE: Wear rods replace the originals exactly on all models except those with E-Z Steer either as original equipment or installed later. For those models, the wear rods listed replace both the plate and the 2-stud, 14-3/4 in. wear rod with a 3-stud, 28 in. design. If you wish to retain the E-Z Steer plate, order part number 10533 for an X-Calibar I or part number 10610 for an X-Calibar III Plus design with 5 in. or 60º carbide. Both are 14-3/4 in. long

Dimensions:

  • Length/Diameter: 18-3/4 in./7/16 in.
  • Stud Diameter/Length: 5/16 in./2 in.
  • Number of Studs: 4

Stud Center Mounting Distance From:

  • Front to 1st: 1-1/8 in.
  • 1st to 2nd: 4-1/2 in.
  • 2nd to 3rd: 6-1/4 in.
  • 3rd to 4th: 4-7/8 in.
  • 4th to End: 2 in.
  • Sno-Stuffs most popular carbide runner
  • 4in. x 60deg. of controlling carbide provides great steering control and longevity
  • A 7/16” bar with two 1” tapered carbide wearpads at each end provides exceptional wear resistance over traditional hard surface bars.
  • 1in. tapered carbide wear pads front and rear provide exceptional wear resistance when compared to traditional hard surface bars
  • Sno-Stuff has completely redone and improved bar selection to better reflect industry changes
  • All bars feature extended studs for convenience
  • All carbides use the sam 7/16in. bar stock with the exact same 60deg. controlling carbide and 1in. wearpads, the only difference being the length of the controlling carbide
  • 60deg. controlling carbide is physically larger and stays sharper for greater control and longevity
  • Sold in pair
  • Length - 17.625"
Fast and free shipping
Fast and free shipping

To most locations on orders over $99.

EVERYDAY LOW PRICES
EVERYDAY LOW PRICES

Top brands, lowest prices.

#1 IN CUSTOMER SERVICE
#1 IN CUSTOMER SERVICE

Expert knowledge and outstanding service.