null

Super ATV UTV Fender Flares

29 Reviews Write a Review
$188.68 - $580.18
$231.16 - $767.66

In Stock

SKU: FENDERFLARES
Thank you! You will be notified by email once this product is in stock.
We are unable to process your request at this time. Please try again later.
  • Low Price Guarantee
  • Easy Returns
  • Fast Shipping

Product Details

Features

  • Protects against rocks, dirt, mud, sand, and other debris
  • Extremely durable
  • Includes all hardware and instructions for easy installation

Keep Dirt Down

We built our extra-wide, extra-tough, SuperATV Fender Flares to keep dirt on the ground. These fender flares do a better job of deflecting dirt and mud than your stock fender flares. The 3/16” thick HDPE construction means they have long-lasting strength and durability mile after mile. Plus, we know how to make them look good — they match the look of your machine and fit so well, your friends will swear they’re OEM fender flares!

Stop Mud in its Tracks

We love sending up huge rooster tails, but we hate getting clobbered with the mud, rocks, and debris that comes back down — the front tires shoot dirt straight into our faces and the rear tires send it raining down our backs. With SuperATV fender flares, the rocks stay on the ground and the mud stays out. We don’t even need to pack extra clothes anymore.

Features

  • Up to 8.5" of protection on each side vs. 4” with stock
  • Protects against rocks, dirt, mud, sand, and other debris
  • Extremely durable 3/16" HDPE (high-density polyethylene)
  • Includes all hardware and instructions for easy installation
  • OEM fender flares NOT required

Keep Dirt Down
We built our extra-wide, extra-tough, SuperATV Fender Flares for Polaris RZR models to keep dirt on the ground. At 8.5” wide at their widest point and over 4” wider than stock, these fender flares do a better job of deflecting dirt and mud than your stock fender flares. The 3/16” thick HDPE construction means they have long-lasting strength and durability mile after mile. Plus, we know how to make them look good — they match the look of your machine and fit so well, your friends will swear they’re OEM fender flares!

Stop Mud in its Tracks
We love sending up huge rooster tails, but we hate getting clobbered with the mud, rocks, and debris that comes back down — the front tires shoot dirt straight into our faces and the rear tires send it raining down our backs. With SuperATV fender flares, the rocks stay on the ground and the mud stays out. We don’t even need to pack extra clothes anymore.
 

Features

  • Up to 8.5" of protection on each side vs. 4” with stock
  • Protects against rocks, dirt, mud, sand, and other debris
  • Extremely durable 3/16" HDPE (high-density polyethylene)
  • Includes all hardware and instructions for easy installation
  • OEM fender flares NOT required

Keep Dirt Down
We built our extra-wide, extra-tough, SuperATV Fender Flares for Polaris RZR models to keep dirt on the ground. At 8.5” wide at their widest point and over 4” wider than stock, these fender flares do a better job of deflecting dirt and mud than your stock fender flares. The 3/16” thick HDPE construction means they have long-lasting strength and durability mile after mile. Plus, we know how to make them look good — they match the look of your machine and fit so well, your friends will swear they’re OEM fender flares!

Stop Mud in its Tracks
We love sending up huge rooster tails, but we hate getting clobbered with the mud, rocks, and debris that comes back down — the front tires shoot dirt straight into our faces and the rear tires send it raining down our backs. With SuperATV fender flares, the rocks stay on the ground and the mud stays out. We don’t even need to pack extra clothes anymore.

Special Order: 2-4 weeks delivery

Features

  • Up to 8.5" of protection on each side vs. 4” with stock
  • Protects against rocks, dirt, mud, sand, and other debris
  • Extremely durable 3/16" HDPE (high-density polyethylene)
  • Includes all hardware and instructions for easy installation
  • OEM fender flares NOT required

Keep Dirt Down
We built our extra-wide, extra-tough, SuperATV Fender Flares for Polaris RZR models to keep dirt on the ground. At 8.5” wide at their widest point and over 4” wider than stock, these fender flares do a better job of deflecting dirt and mud than your stock fender flares. The 3/16” thick HDPE construction means they have long-lasting strength and durability mile after mile. Plus, we know how to make them look good — they match the look of your machine and fit so well, your friends will swear they’re OEM fender flares!

Stop Mud in its Tracks
We love sending up huge rooster tails, but we hate getting clobbered with the mud, rocks, and debris that comes back down — the front tires shoot dirt straight into our faces and the rear tires send it raining down our backs. With SuperATV fender flares, the rocks stay on the ground and the mud stays out. We don’t even need to pack extra clothes anymore.

Special Order: 2-4 weeks delivery

Features

  • Made of extremely durable 1/8” HDPE (high-density polyethylene)
  • Adds up to an additional 5.5” of protection on each side
  • Protects against rocks, dirt, mud, sand, and other debris
  • Includes all hardware and instructions for easy installation
  • Mounts to OEM fender flares for a sleek, low-profile look

Keep the Trail Down
Sometimes when the trail is a little loose or a little damp, it seems like all your Polaris RZR XP Turbo does is fling a metric ton of dirt and mud in the air. Before long, there’s more mud in your cab than there is on the ground. With SuperATV’s Low Profile Fender Flares, you can keep it all down. They install under your stock fender flares and add a sleek, low-profile extension that looks awesome. You won’t have to change your clothes after this ride.

Stronger Design
The RZR Turbo’s designed to go fast, so we made sure these extended fender flares are too. The 1/8” LDPE construction is flexible yet rigid and secured using machined-aluminum chamfered washers paired with countersunk bolts. They’ll take a beating from your rocky rooster tail and survive heavy hits from trees.

They Look Awesome
These fender flares extend all the way front to back on all four fender flares to provide massive coverage where your stock flares taper off. They bolt up smoothly to give your machine a sleek style that just looks fast. It’s awesome protection that will turn heads too.

Please Note

  • Not compatible with SuperATV's full protection kit (FP-P-RZR1K).

Features

  • Up to 8.5" of protection on each side vs. 4” with stock
  • Protects against rocks, dirt, mud, sand, and other debris
  • Extremely durable 3/16" HDPE (high-density polyethylene)
  • Includes all hardware and instructions for easy installation
  • OEM fender flares NOT required

Keep Dirt Down
We built our extra-wide, extra-tough, SuperATV Fender Flares for Polaris RZR models to keep dirt on the ground. At 8.5” wide at their widest point and over 4” wider than stock, these fender flares do a better job of deflecting dirt and mud than your stock fender flares. The 3/16” thick HDPE construction means they have long-lasting strength and durability mile after mile. Plus, we know how to make them look good — they match the look of your machine and fit so well, your friends will swear they’re OEM fender flares!

Stop Mud in its Tracks
We love sending up huge rooster tails, but we hate getting clobbered with the mud, rocks, and debris that comes back down — the front tires shoot dirt straight into our faces and the rear tires send it raining down our backs. With SuperATV fender flares, the rocks stay on the ground and the mud stays out. We don’t even need to pack extra clothes anymore.
 

Special Order: 2-4 weeks delivery

Please Note

  • Not compatible with SuperATV's full protection kit (FP-P-RZR1K).

Features

  • Up to 8.5" of protection on each side vs. 4” with stock
  • Protects against rocks, dirt, mud, sand, and other debris
  • Extremely durable 3/16" HDPE (high-density polyethylene)
  • Includes all hardware and instructions for easy installation
  • OEM fender flares NOT required

Keep Dirt Down
We built our extra-wide, extra-tough, SuperATV Fender Flares for Polaris RZR models to keep dirt on the ground. At 8.5” wide at their widest point and over 4” wider than stock, these fender flares do a better job of deflecting dirt and mud than your stock fender flares. The 3/16” thick HDPE construction means they have long-lasting strength and durability mile after mile. Plus, we know how to make them look good — they match the look of your machine and fit so well, your friends will swear they’re OEM fender flares!

Stop Mud in its Tracks
We love sending up huge rooster tails, but we hate getting clobbered with the mud, rocks, and debris that comes back down — the front tires shoot dirt straight into our faces and the rear tires send it raining down our backs. With SuperATV fender flares, the rocks stay on the ground and the mud stays out. We don’t even need to pack extra clothes anymore.
 

Special Order: 2-4 weeks delivery

Please Note

  • Installation requires drilling into your machine

Features

  • Protect against rocks, dirt, sand, and other debris
  • Made of extremely durable HDPE (high-density polyethylene)
  • Gives 3” of extra coverage
  • Includes access to instructions and all necessary hardware for easy installation

More Riding, Less Cleaning
Everybody loves tearin' it up on the trails or in the mud, but very few riders are fans of the cleanup that follows. No matter where you ride, you’re bound to end up with an unfortunate amount of dirt and stray rocks kicked up into your cab. That’s why SuperATV designed these ultra-durable Fender Flares for your Polaris RZR PRO XP. They shield your cab (and your face) from the debris that gets kicked up while you’re putting pedal to the metal, and they make your machine look even tougher than it already does.

Much-Needed Protection
With our fender flares, you get much-needed extra protection at the front and rear of your machine. They extend three inches off the side of your PRO XP, giving plenty of coverage where you need it most. Not only does this cut down on cleanup time—it also protects your exterior body work from dents and scratches, keeping your machine looking good as new.

Classic Design, Industry-Leading Strength
There are plenty of side-by-side fender flares on the market, but they don’t offer the strength and style that ours do. SuperATV’s fender flares are made from thick, high-strength HDPE. This material is highly tested and strong enough to stand up to the most brutal trail abuse. They’re designed to match the natural contours of your machine so well that you’ll forget they’re not OEM. And the best part? With included hardware and an easy, bolt-on installation process, most riders have these fender flares installed in thirty minutes or less.

Please Note

  • Installation requires drilling into your machine

Features

  • Extends out 4" from the body
  • Protects against rocks, dirt, sand, and other debris
  • Made of extremely durable HDPE (high-density polyethylene)
  • Comes with full-color instructions and all necessary hardware for easy installation

A Mudslinger’s Best Friend
We designed the ultra-tough SuperATV Fender Flares for the Polaris Ranger XP 1000 because we know that fender flares are a mudslinger’s best friend. This product is built to keep dirt and rocks where they belong—on the ground. They extend 4 inches out from the body of your machine, so you’ll be able to hit the trails, creeks, and dunes even harder without worrying about that mess being slung into your cab. Oh, and did we mention they’ll make you look pretty dang cool, too?

No Such Thing as “Tough Enough”
Our fender flares are made of extremely durable HDPE, or high-density polyethylene, which means they can put up with abuse for miles on end. We’ve put them through some serious testing because we know there’s no such thing as “tough enough.” They’re cut to mount to your vehicle so securely and precisely that you’d think they were stock parts. We want to note that drilling into your machine is required with this product, but installation is a super quick and easy process. We ship each set of fender flares with easy-to-follow instructions and all necessary hardware because we know you’re eager to mount them on your machine and see them in action.

Special Order: 2-4 weeks delivery

Please Note

  • Installation requires drilling into your machine

Features

  • Extends out 4" from the body
  • Protects against rocks, dirt, sand, and other debris
  • Made of extremely durable HDPE (high-density polyethylene)
  • Comes with full-color instructions and all necessary hardware for easy installation

A Mudslinger’s Best Friend
We designed the ultra-tough SuperATV Fender Flares for the Polaris Ranger XP 1000 because we know that fender flares are a mudslinger’s best friend. This product is built to keep dirt and rocks where they belong—on the ground. They extend 4 inches out from the body of your machine, so you’ll be able to hit the trails, creeks, and dunes even harder without worrying about that mess being slung into your cab. Oh, and did we mention they’ll make you look pretty dang cool, too?

No Such Thing as “Tough Enough”
Our fender flares are made of extremely durable HDPE, or high-density polyethylene, which means they can put up with abuse for miles on end. We’ve put them through some serious testing because we know there’s no such thing as “tough enough.” They’re cut to mount to your vehicle so securely and precisely that you’d think they were stock parts. We want to note that drilling into your machine is required with this product, but installation is a super quick and easy process. We ship each set of fender flares with easy-to-follow instructions and all necessary hardware because we know you’re eager to mount them on your machine and see them in action.

Features

  • Up to 8.5" of protection on each side vs. 4” with stock
  • Protects against rocks, dirt, mud, sand, and other debris
  • Extremely durable 3/16" HDPE (high-density polyethylene)
  • Includes all hardware and instructions for easy installation
  • OEM fender flares NOT required

Keep Dirt Down
We built our extra-wide, extra-tough, SuperATV Fender Flares for the Polaris RZR S 1000 to keep dirt on the ground. At 8.5” wide at their widest point and over 4” wider than stock, these fender flares do a better job of deflecting dirt and mud than your stock fender flares. The 3/16” thick HDPE construction means they have long-lasting strength and durability mile after mile. Plus, we know how to make them look good — they match the look of your machine and fit so well, your friends will swear they’re OEM fender flares!

Stop Mud in its Tracks
We love sending up huge rooster tails, but we hate getting clobbered with the mud, rocks, and debris that comes back down — the front tires shoot dirt straight into our faces and the rear tires send it raining down our backs. With SuperATV fender flares, the rocks stay on the ground and the mud stays out. We don’t even need to pack extra clothes anymore.

Special Order: 2-4 weeks delivery

Features

  • Up to 8.5" of protection on each side vs. 4” with stock
  • Protects against rocks, dirt, mud, sand, and other debris
  • Extremely durable 3/16" HDPE (high-density polyethylene)
  • Includes all hardware and instructions for easy installation
  • OEM fender flares NOT required

Keep Dirt Down
We built our extra-wide, extra-tough, SuperATV Fender Flares for the Polaris RZR S 1000 to keep dirt on the ground. At 8.5” wide at their widest point and over 4” wider than stock, these fender flares do a better job of deflecting dirt and mud than your stock fender flares. The 3/16” thick HDPE construction means they have long-lasting strength and durability mile after mile. Plus, we know how to make them look good — they match the look of your machine and fit so well, your friends will swear they’re OEM fender flares!

Stop Mud in its Tracks
We love sending up huge rooster tails, but we hate getting clobbered with the mud, rocks, and debris that comes back down — the front tires shoot dirt straight into our faces and the rear tires send it raining down our backs. With SuperATV fender flares, the rocks stay on the ground and the mud stays out. We don’t even need to pack extra clothes anymore.

Special Order: 2-4 weeks delivery

Features

  • Up to 8.5" of protection on each side vs. 4” with stock
  • Protects against rocks, dirt, mud, sand, and other debris
  • Extremely durable 3/16" HDPE (high-density polyethylene)
  • Includes all hardware and instructions for easy installation
  • OEM fender flares NOT required

Keep Dirt Down
We built our extra-wide, extra-tough, SuperATV Fender Flares for the Polaris RZR S 1000 to keep dirt on the ground. At 8.5” wide at their widest point and over 4” wider than stock, these fender flares do a better job of deflecting dirt and mud than your stock fender flares. The 3/16” thick HDPE construction means they have long-lasting strength and durability mile after mile. Plus, we know how to make them look good — they match the look of your machine and fit so well, your friends will swear they’re OEM fender flares!

Stop Mud in its Tracks
We love sending up huge rooster tails, but we hate getting clobbered with the mud, rocks, and debris that comes back down — the front tires shoot dirt straight into our faces and the rear tires send it raining down our backs. With SuperATV fender flares, the rocks stay on the ground and the mud stays out. We don’t even need to pack extra clothes anymore.
 

Special Order: 2-4 weeks delivery

Features

  • Made of extremely durable 1/8” LDPE (low-density polyethylene)
  • Adds up to an additional 3” of protection on each side
  • Protects against rocks, dirt, mud, sand, and other debris
  • Mounts to OEM fender flares for a sleek, low-profile look
  • Includes all hardware and instructions for easy installation

Keep the Mud Out
If you ride like we do, you’re constantly flinging mud and dirt into your cab (and sometimes onto your face). If you want to enjoy the ride without worrying about the cleanup that follows, get SuperATV’s Low Profile Fender Flares for your Polaris General. They extend your stock fender flares by 3”, providing a much-needed shield against mud, water, and other trail debris. They look great and make mudding and creek riding easier than ever.

Trail-Tested Strength
We made sure these fender flare extensions are built to last, because we know you’re going to beat them up every time you get behind the wheel. They’re made from 1/8” LDPE plastic, which is flexible yet super tough. They secure to your existing Polaris General fender flares using machined aluminum chamfered washers and countersunk bolts for a smooth, natural look. You’ll enjoy the same wild rides you’re used to, just without all the mess.

Head-Turning Good Looks
Our Low Profile Fender Flares deliver the total package when it comes to style and functionality. They cover your entire wheel well, helping to keep your cab clean while making your General look better than ever. You’ll stay comfortable and turn heads everywhere you go thanks to this sleek and low-profile design.

Features

  • Protect against rocks, dirt, sand, and other debris
  • Made of extremely durable HDPE (high-density polyethylene)
  • Up to 8.5" of protection on each side compared to 4” with stock
  • Includes access to instructions and all necessary hardware for easy installation

Protect Yourself
Getting behind the wheel of your Polaris RZR Trail S 1000 and hitting the gas is the start of a great adventure… and the start of filling your cab with dirt and rocks from your tires. Protect yourself with SuperATV’s Fender Flares. They combine oversized protection with sleek design to deliver the ultimate fender flare package.

Superb Strength
Our fender flares are built with the strength to make it through. They use 3/16” HDPE that’s made to get pelted with rocks. Combine unstoppable strength with over 4” of protection on each side, and you’ve got flares that will keep everything down.

Factory Look, Unbeatable Style
The factory fit and finish of our fender flares is by design. They won’t look out of place on your machine. But the big, burly style will look awesome. You’ll love the way they look on your UTV, and you’re bound to get more than a few compliments. Machine protection never looked so good.

Special Order: 2-4 weeks delivery

Features

  • Protect against rocks, dirt, sand, and other debris
  • Made of extremely durable HDPE (high-density polyethylene)
  • Up to 8.5" of protection on each side compared to 4” with stock
  • Includes access to instructions and all necessary hardware for easy installation

Protect Yourself
Getting behind the wheel of your Polaris RZR Trail S 1000 and hitting the gas is the start of a great adventure… and the start of filling your cab with dirt and rocks from your tires. Protect yourself with SuperATV’s Fender Flares. They combine oversized protection with sleek design to deliver the ultimate fender flare package.

Superb Strength
Our fender flares are built with the strength to make it through. They use 3/16” HDPE that’s made to get pelted with rocks. Combine unstoppable strength with over 4” of protection on each side, and you’ve got flares that will keep everything down.

Factory Look, Unbeatable Style
The factory fit and finish of our fender flares is by design. They won’t look out of place on your machine. But the big, burly style will look awesome. You’ll love the way they look on your UTV, and you’re bound to get more than a few compliments. Machine protection never looked so good.
 

Features

  • Protect against rocks, dirt, sand, and other debris
  • Made of extremely durable HDPE (high-density polyethylene)
  • Up to 8.5" of protection on each side compared to 4” with stock
  • Includes access to instructions and all necessary hardware for easy installation

Stay Protected
Spinning the tires on your Polaris RZR Trail 900 is fun… as long as you don’t mind getting clobbered by your tires’ dirt spray. Stay protected with SuperATV’s Fender Flares. They keep the dirt on the trail where it belongs instead of in your cab and up your nose. The precision design matches the look of stock perfectly—just bigger and better.

Built for Strength
Our fender flares give you over 4” of extra protection on each side. The 3/16” HDPE construction is designed to deflect rocks and dirt at high speed without breaking. Whether you’re trying to stop your front tires from shooting debris straight into your face or your rear tires from sending crap down the back of your shirt, these fender flares will get it done.

Sleek and Powerful
Style doesn’t have to be secondary to function. Our fender flares look just as sleek as they are strong. You’ll look twice when you have them installed because they match the curves and contours of your machine so perfectly. You’ll think they came straight from the factory.
 

Special Order: 2-4 weeks delivery

Features

  • Protect against rocks, dirt, sand, and other debris
  • Made of extremely durable HDPE (high-density polyethylene)
  • Up to 8.5" of protection on each side compared to 4” with stock
  • Includes access to instructions and all necessary hardware for easy installation

Stay Protected
Spinning the tires on your Polaris RZR Trail 900 is fun… as long as you don’t mind getting clobbered by your tires’ dirt spray. Stay protected with SuperATV’s Fender Flares. They keep the dirt on the trail where it belongs instead of in your cab and up your nose. The precision design matches the look of stock perfectly—just bigger and better.

Built for Strength
Our fender flares give you over 4” of extra protection on each side. The 3/16” HDPE construction is designed to deflect rocks and dirt at high speed without breaking. Whether you’re trying to stop your front tires from shooting debris straight into your face or your rear tires from sending crap down the back of your shirt, these fender flares will get it done.

Sleek and Powerful
Style doesn’t have to be secondary to function. Our fender flares look just as sleek as they are strong. You’ll look twice when you have them installed because they match the curves and contours of your machine so perfectly. You’ll think they came straight from the factory.
 

Special Order: 2-4 weeks delivery

Features

  • Protect against rocks, dirt, sand, and other debris
  • Made of extremely durable HDPE (high-density polyethylene)
  • Up to 8.5" of protection on each side compared to 4” with stock
  • Includes access to instructions and all necessary hardware for easy installation

Make Your Cab Safer
We know all too well that when you hit the trail, the trail hits back. That’s why we made Fender Flares for the Polaris RZR Trail S 900. They’re designed to keep rocks and debris down in the front and rear so that none of it ends up in your cab. They’re sleek, they’re strong, and they’ll make you like riding more.

Strength You Need
With over 4” of extra protection on each side, these fender flares will keep more debris down than stock could ever dream of. They’re made with 3/16” HDPE that can take a beating without breaking. These will keep you protected whether it’s the front or rear tires that are spraying you down.

Familiar Design, Surprising Style
Our fender flares are designed to look like they came from the factory. They match your UTV’s design language perfectly except they’re bigger, beefier, and will turn heads every time you hit the trail. It’s machine protection with attitude.

Special Order: 2-4 weeks delivery

Please Note

  • Installing this product requires drilling into your machine.

Features

  • Deflects rocks, mud, and other debris
  • Made of heavy-duty automotive plastic
  • Front width: 3”
  • Rear width: 3”
  • Comes with all required hardware and access to full-color instructions
  • Quick and easy installation

No More Trail Debris
You’re a RZR rider, so we know you don’t let anything come between you and the terrain. You especially wouldn’t let a little trail debris slow you down, which is why you need SuperATV’s Safari Fender Flares for the Polaris RZR 800. They deflect rocks and mud, keeping that stuff on the ground (where it belongs) instead of in your cab. And did we mention they look really cool, too? The black studded design gives your machine an even more rugged appearance.

Durable and Heavy Duty
These fender flares are made of durable, heavy-duty automotive plastic—in other words, they’re built to put up with years of trail abuse. They offer three extra inches of protection at both the front and rear of your vehicle. This means you can ride longer and harder without worrying about debris being thrown up into your cab.

Quick, Easy Installation
Our fender flares come with all required hardware and access to full-color instructions, so installation is a breeze. We will note that installing this product requires drilling into your machine, but the process is quick and easy. Less time in the garage means more time hitting the trails, so you’ll be putting these fender flares to the test in no time.

Features

  • Made of extremely durable 1/8” LDPE (low-density polyethylene)
  • Adds up to an additional 5” of protection on each side
  • Protects against rocks, dirt, mud, sand, and other debris
  • Mounts to OEM fender flares for a sleek, low-profile look
  • Includes all hardware and instructions for easy installation

Stay Clean While Getting Dirty
Most riders are OK with having sludge caked on their machine, but not everyone loves having it thrown in their lap. That’s where SuperATV’s Low Profile Fender Flares can help. They attach to your Kawasaki Teryx KRX 1000’s stock fender flares to give you up to 5” of additional coverage. From mud holes to creeks, these flares are an easy and low-cost way to keep your cab (and your lap) clean while your KRX gets down and dirty. And thanks to our solid construction and sleek, low-profile design, you’ll look good doing it.

A Perfect Fit for Your KRX
Our fender flare extensions are made from 1/8” LDPE, so they can handle the most brutal off-road hits without breaking. They secure to your existing fender flares using machined aluminum chamfered washers and countersunk bolts. Combine that with precision cutting to match the curves of your KRX 1000 fender flares and you’re left with a smooth, cohesive look.

Style Meets Practicality
These KRX mud flaps offer end-to-end coverage of your wheel well. They’re sleek and rigid, and they look just as good as they perform. When it comes to style and practicality, our Low Profile Fender Flares deliver the whole package.
 

Features

  • Made of extremely durable 1/8” HDPE (high-density polyethylene)
  • Adds up to 4” of protection on each side
  • Keeps mud, water, and other debris from getting in your cab
  • Mounts to OEM fender flares for a sleek, low-profile look
  • Includes all hardware and instructions for easy installation

Stay Wild and Stay Clean
When you’re out enjoying your UTV to its fullest extent, there’s no doubt you’ll be slinging slop like it’s going out of fashion. If you want it off of your shirt, you need our Kawasaki Teryx 800 Low Profile Fender Flares. You get up to 4” of extra protection at its widest point for extreme coverage with badass flare.

Built to Take a Beating
Parts from SuperATV are made with strength at their core, and our fender flare extensions are no exception. They’re made from 1/8” HDPE plastic to easily plow through the rugged trails you love. They deflect mud and dirt without cracking so you can focus on what’s ahead.

Full Coverage with a Slick Look
You get maximum coverage when you install these mud flaps. They extend up to 4” past your stock fender flares and cover your entire wheel well. They’re also compatible with SuperATV Heavy-Duty Nerf Bars so you can beef up your protection even more. And they look like they add 10 horsepower to your Teryx.

Special Order: 2-4 weeks delivery

Please Note

  • Installation requires drilling into your machine

Features

  • Extends out four inches from the body
  • Protects against rocks, dirt, sand, and other debris
  • Made of extremely durable HDPE (high-density polyethylene)
  • Comes with full-color instructions and all necessary hardware for easy installation

Keep the Muck Out
Can-Am riders are no stranger to adventure, and with adventure usually comes mud—lots of it. Keep the muck out of your cab (and your lap) with SuperATV’s Fender Flares for the Can-Am Defender. These fender flares extend out four inches from the body of your vehicle to deflect dirt and rocks, allowing you to tackle any terrain with ease. If you’re sick of the excessive cab cleanup that follows every muddy ride, this product is a must-have.

The Durability You Need
The rugged construction of these fender flares won’t just protect you and your vehicle from debris—they’ll also have you looking really, really cool. They’re designed to match the rugged style and curves of your Defender so well that your buddies would swear they were OEM. We make these fender flares out of ultra-tough HDPE (or high-density polyethylene), which is what gives them the maximum durability that you need. Installing this product does require drilling into your machine, but the entire process is still super quick and easy. Our fender flares show up at your door with full-color instructions and all necessary hardware, so you can install them and be on the trails in a flash.

Special Order: 2-4 weeks delivery

Features

  • Made of extremely durable 1/8” LDPE (low-density polyethylene)
  • Adds up to an additional 3.75” of protection on each side
  • Protects against rocks, dirt, mud, sand, and other debris
  • Mounts to OEM fender flares for a sleek, low-profile look
  • Includes all hardware and instructions for easy installation

Say Goodbye to the Dirt
Leave the dirt behind rather than smearing it all over your Can-Am Commander and, ultimately, on you. SuperATV’s Low Profile Fender Flares keeps the dirt off your neck and debris out of your cab. It extends your stock fender flares by up to 3.75”. All that extra protection leaves your machine cleaner and looking more badass than before.

Strong by Design
These Can-Am Commander fender flares are made from highly durable 1/8” LDPE. Use them and abuse them however you want—these extended fender flares can handle it. They’re secured to your existing fender flares with machined aluminum chamfered washers and countersunk bolts, creating a cohesive look for your machine.

Fender Flare Extensions Made For You
Don’t sacrifice style for protection when SuperATV products give you both. These Can-Am fender flares stick out from the crowd with the wide design and stylish black plastic. The additional coverage keeps you clean while your buddies are covered in mud. And everyone will be able to appreciate your Can-Am Commander.

Special Order: 2-4 weeks delivery

Features

  • Made of extremely durable 1/8” LDPE (low-density polyethylene)
  • Adds up to an additional 4” of protection on each side
  • Protects against rocks, dirt, mud, sand, and other debris
  • Mounts to OEM fender flares for a sleek, low-profile look
  • Includes all hardware and instructions for easy installation

Keep Your Cab Clean
When the pedal goes down, the mud flies up. Those wild and messy rides are usually the most fun, but nobody loves the cleanup that happens afterwards. That’s why we made these Low Profile Fender Flares for your Yamaha Wolverine RMAX 1000. They extend your stock flares by up to 4” to add a much-needed shield against mud, water, and rocks. They’re perfect for mudding and creek riding, and they make your RMAX look better than ever.

A Seamless Fit to Your Fender Flares
We made sure these extended fender flares are built to last because we know you’re going to beat them up. They attach to your existing fender flares using countersunk bolts and machined aluminum chamfered washers. That, in addition to precision cutting, helps them match your stock fender flares for a natural look. The ultra-tough 1/8” LDPE construction is tough yet flexible enough to handle a constant onslaught of rocks and dirt without cracking.

Aggressive Style
If you’re looking for exceptional protection that looks as good as it performs, you’re in the right place. Our Low Profile Fender Flares sport a sleek, low-profile design that will make your RMAX look more aggressive than ever. You’ll turn heads wherever you ride, and you’ll stay clean and dry while doing it.

Special Order: 2-4 weeks delivery

Features

  • Made of extremely durable 1/8” LDPE (low-density polyethylene)
  • Adds up to an additional 4” of protection on each side
  • Protects against rocks, dirt, mud, sand, and other debris
  • Mounts to OEM fender flares for a sleek, low-profile look
  • Includes all hardware and instructions for easy installation

Keep Your Cab Clean
When the pedal goes down, the mud flies up. Those wild and messy rides are usually the most fun, but nobody loves the cleanup that happens afterwards. That’s why we made these Low Profile Fender Flares for your Yamaha Wolverine RMAX 1000. They extend your stock flares by up to 4” to add a much-needed shield against mud, water, and rocks. They’re perfect for mudding and creek riding, and they make your RMAX look better than ever.

A Seamless Fit to Your Fender Flares
We made sure these extended fender flares are built to last because we know you’re going to beat them up. They attach to your existing fender flares using countersunk bolts and machined aluminum chamfered washers. That, in addition to precision cutting, helps them match your stock fender flares for a natural look. The ultra-tough 1/8” LDPE construction is tough yet flexible enough to handle a constant onslaught of rocks and dirt without cracking.

Aggressive Style
If you’re looking for exceptional protection that looks as good as it performs, you’re in the right place. Our Low Profile Fender Flares sport a sleek, low-profile design that will make your RMAX look more aggressive than ever. You’ll turn heads wherever you ride, and you’ll stay clean and dry while doing it.

Features

  • Made of extremely durable 1/8” LDPE (low-density polyethylene)
  • Adds up to an additional 4” of protection on each side
  • Protects against rocks, dirt, mud, sand, and other debris
  • Mounts to OEM fender flares for a sleek, low-profile look
  • Includes all hardware and instructions for easy installation

Stay Clean on Muddy Rides
When the pedal goes down, the mud flies up. And that’s great, until sludge ends up in your lap and all over your cab. If this problem sounds all too familiar, your Yamaha Wolverine X2 needs SuperATV’s Low Profile Fender Flares. They’re a cost-effective way to stay clean on dirty rides, and they’ll make your Wolverine look even better. Our fender flare extensions attach to your stock fender flares, giving you an additional 4” of protection against mud, water, and other trail debris.

Flexible Yet Rigid
Our Low Profile Fender Flares are made from ultra-tough 1/8” LDPE plastic, because we know you’re going to put them through hell. This material is flexible yet rigid—perfect for extreme rides. They match the curves of your existing Yamaha Wolverine X2 fender flares and attach using machined aluminum chamfered washers and countersunk bolts, giving off a smooth appearance. These things are built for battle, so you can tear up the trails without tearing off your fender flares.

Stylish and Practical
If you’re looking for a way to add both looks and practicality to your Wolverine X2, look no further. These fender extensions provide end-to-end coverage of your wheel well, giving you maximum coverage for muddy or wet rides. They’re made with a low-profile design and matte black finish, adding a touch of style to a machine that already knows how to stand out in a crowd.

Special Order: 2-4 weeks delivery

Features

  • Made of extremely durable 1/8” LDPE (low-density polyethylene)
  • Adds up to an additional 4” of protection on each side
  • Protects against rocks, dirt, mud, sand, and other debris
  • Mounts to OEM fender flares for a sleek, low-profile look
  • Includes all hardware and instructions for easy installation

Get More Wheel Coverage
You don’t mind slinging a little mud, but rocks getting flung into your cab ain’t exactly your thing. Get protected with SuperATV’s Yamaha Wolverine X4 Low Profile Fender Flares. By extending your fender flares up to 4” inches, you’ll be able to block dirt and debris that would otherwise be flying towards your cab (and you!) The fender flares also give your Yamaha Wolverine X4 a brawny look.

The Strength of LDPE
If your Wolverine X4 gets used the way it was intended—exploring vast forests and traversing rugged landscapes—you’ll no doubt appreciate the sturdy 1/8” LDPE construction. To keep your fender flare extensions from coming off on a tight forest trail, it’s secured with machined aluminum chamfered washers and countersunk bolts. We cut them to match the curves of your Yamaha Wolverine X4—they’ll fit better and look better. The cut also makes the fender flares easier to install.

Better Style by Design
Our Yamaha Wolverine Fender Flares match the bend of your stock fender flares. They also enhance the look of your machine by giving it a wider look. These fender flares will make your UTV the star of bounty holes and trails.

Special Order: 2-4 weeks delivery

Features

  • Made of extremely durable 1/8” LDPE (low-density polyethylene)
  • Adds up to an additional 6” of protection on each side
  • Protects against rocks, dirt, mud, sand, and other debris
  • Mounts to OEM fender flares for a sleek, low-profile look
  • Includes all hardware and instructions for easy installation

Get More Tire Coverage
Just because you fly through the dirt with your Honda Talon 1000, it doesn’t mean dirt has to fly at you. Put SuperATV’s Honda Talon 1000 Low Profile Fender Flares on your machine and put them to the test. They’ll help keep whatever your tires kick up out of your cab and help your machine stay cleaner for longer. The low-profile fender flares extend your existing fender flares an extra 6” and adds to the sporty look of your Honda Talon.

Extended Fender Flares That are Built to Last
We make our Honda Talon Fender Flares out of durable 1/8” LDPE. They won’t break if you drive through some branches. That’s not the only reason they stay on—they’re held together with machined aluminum chamfered washers and countersunk bolts to keep them secured. We also cut them to match your fenders. That makes them easier to install, and they’ll go great with your stock fenders.

Fender Flare Extensions with Style and Strength
Our extended fender flares not only look great, but they work great too. They’ll protect your Talon 1000 from deep mud pits and gravel-covered fire roads with style. These Honda Talon Fender Flares are the ultimate fusion of form and function. The only drawback? You might get sick of people asking where you got them!

Special Order: 2-4 weeks delivery

Features

  • Made of extremely durable 1/8” LDPE (low-density polyethylene)
  • Adds up to an additional 4” of protection on each side
  • Protects against rocks, dirt, mud, sand, and other debris
  • Mounts to OEM fender flares for a sleek, low-profile look
  • Includes all hardware and instructions for easy installation

Keep Your Cab Mud Free
 

A few days of torrential downpours make for muddy fields and trails, and you’re still going to need to finish your work and do your chores. So add SuperATV’s Low Profile Fender Flares to your Honda Pioneer 1000-5. They extend your OEM fender flares by up to 4” to give you the ultimate protection from mud, dirt, and debris. Plus, they don’t interfere with your dump bed, so you can do your chores like before but with a cleaner cab. And they look dang cool.

Superior Strength
 

These fender flares for your Honda Pioneer 1000-5 were designed with strength in mind. We know you’ll put them through hell battling tough, sharp debris. That’s why we’ve made them from ultra-strong 1/8” LDPE plastic. And they’re cut to match the curves of your existing flares and secured by aluminum washers and countersunk bolts for a more cohesive look.

Fender Flare Extensions
 

Having end-to-end coverage for your wheel wells is a must and our Honda Pioneer 1000-5 fender flares get the job done. Not only do they provide the protection you need, but they also make your machine look badass—they’re sleek and come in a matte black color. Our low profile fender flares are the whole package when it comes to style and functionality.

Special Order: 2-4 weeks delivery

Features

  • Made of extremely durable 1/8” LDPE (low-density polyethylene)
  • Adds up to an additional 4” of protection on each side
  • Protects against rocks, dirt, mud, sand, and other debris
  • Mounts to OEM fender flares for a sleek, low-profile look
  • Includes all hardware and instructions for easy installation

Keep Your Cab Mud Free
A few days of torrential downpours make for muddy fields and trails, and you’re still going to need to finish your work and do your chores. So add SuperATV’s Low Profile Fender Flares to your Honda Pioneer 1000. They extend your OEM fender flares by up to 4” to give you the ultimate protection from mud, dirt, and debris. Plus, they don’t interfere with your dump bed, so you can do your chores like before but with a cleaner cab. And they look dang cool.

Superior Strength
These fender flares for your Honda Pioneer 1000 were designed with strength in mind. We know you’ll put them through hell battling tough, sharp debris. That’s why we’ve made them from ultra-strong 1/8” LDPE plastic. And they’re cut to match the curves of your existing flares and secured by aluminum washers and countersunk bolts for a more cohesive look.

Fender Flare Extensions
Having end-to-end coverage for your wheel wells is a must and our Honda Pioneer 1000 fender flares get the job done. Not only do they provide the protection you need, but they also make your machine look badass—they’re sleek and come in a matte black color. Our low profile fender flares are the whole package when it comes to style and functionality.

Special Order: 2-4 weeks delivery

Features

  • Made of extremely durable 1/8” LDPE (low-density polyethylene)
  • Adds up to an additional 6.5” protection in the front and 5” protection in the rear
  • Protects against rocks, dirt, mud, sand, and other debris
  • Mounts to OEM fender flares for a sleek, low-profile look
  • Includes all hardware and instructions for easy installation

Keep Your Cab Mud Free

Rain always has a way of making a productive and functional worksite a muddy one. Install SuperATV's Low Profile Fender Flares to your Kawasaki Mule to give your machine the ultimate protection from mud, dirt, and debris. They extend your OEM fender flares by up to 6.5" in the front and 5" in the rear. And thanks to our clever design, they don't interfere with your dump bed. So you can complete a day's work while keeping your cab free of dirt and mud. Not to mention, they make your Mule Pro look totally badass.

Ultra-Strong 1/8" LDPE

We know what you're facing out on the trail, so we've made these fender flares to handle heavy blows from trail debris. These extended Mule Pro FXT fender flares are made from ultra-strong 1/8" LDPE. We’ve designed them to match the curves of your stock flares for a more cohesive look. And they’re secured by aluminum washers and countersunk bolts.

Fender Flare Extensions

Ensuring your machine stays protected is important, and these fender flares get the job done. Not only do they give you the end-to-end protection that you need, but they make your Mule Pro look like a total monster. They're matte black and have a sleek design that compliments your machine.

Special Order: 2-4 weeks delivery

Features

  • Made of extremely durable 1/8” LDPE (low-density polyethylene)
  • Adds up to an additional 5.5” of protection on each side
  • Protects against rocks, dirt, mud, sand, and other debris
  • Includes all hardware and instructions for easy installation
  • Mounts to OEM fender flares for a sleek, low-profile look

Stop Throwing Dirt Everywhere
For all the cool stuff Segway brought to the industry with the Fugleman, robust fender flares are not one of them. Install SuperATV’s Low-Profile Fender Flares on your Segway Fugleman UT10 to get flares that keep the trail down. They extend your stock fender flares by up to 5.5” to save you and your machine from getting covered in crud, and they look great too.

Tough and Flexible
Your Fugleman has the performance to go some rough and rowdy places, and you need these extended fender flares to be tough too. We make them with 1/8” LDPE that’s tough but flexible so it can take hard hits without breaking. Plus, they’re mounted with aluminum washers and countersunk bolts for a smooth fit, and they’re cut to match the existing curves on your machine for a smooth, stylish look.

Fender Flare Extensions that Turn Heads
These Fugleman extended fender flares keep mud and dirt off your machine while looking good. They’re thin, wide, and black to give you a sleek look that’ll probably give you an extra horsepower or two. You’ll keep the trail down while looking slick.

Special Order: 2-4 weeks delivery

Features

  • Made of extremely durable 1/8” LDPE (low-density polyethylene)
  • Adds up to an additional 5” of protection on each side
  • Protects against rocks, dirt, mud, sand, and other debris
  • Mounts to OEM fender flares for a sleek, low-profile look
  • Includes all hardware and instructions for easy installation

Keep Dirt Down

Your Can-Am Maverick X3 can tear up a trail better than just about any other UTV. But if you don’t want your rooster tail covering you and your buddies in dirt, you need to invest in SuperATV’s Low Profile Fender Flares. They extend your stock fender flares to deliver stylish protection that keeps you clean.

Extended Fender Flares That Are Built to Last

These 1/8” HDPE plastic fender flares are tough enough to handle hard hits. With machined aluminum chamfered washers and countersunk bolts to secure it, you can ride just as hard as you always do without worrying about ripping them off. Plus, they’re built to match the profile of your stock flares so they look built in and fit easily.

Head-Turning Design

Our end-to-end fender flare extensions look as good as they perform. They give you up to 5” of additional coverage and even cover where your stock flares taper off. The flat, black plastic panels look sharp and add the perfect, head-turning style you’re after.
 

Special Order: 2-4 weeks delivery

NOTE: Installation requires drilling in OEM-designated locations

Features

  • Protect against rocks, dirt, sand, and other debris
  • Made of extremely durable HDPE (high-density polyethylene)
  • Gives 5” of extra coverage
  • Includes access to instructions and all necessary hardware for easy installation

Fender Flares Keep You Clean

If there’s one thing your X3 is really good at, it’s kicking up massive rooster tails. But if you want to keep all that dirt out of your cab and off your machine, you need our Can-Am Maverick X3 Fender Flares. Our robust fender flares protect you and your machine and look good while doing it.

Keep the Trail Down

Tossing rocks and mud all over your machine is a pain, especially when you have mud landing in your lap and those flying rocks damage the body of your machine. Lucky for you, these extended fender flares give you 5” more protection than stock—more than enough to deflect all the crud your tires kick up.

Made to Last and Lookin' Good

Every part of your machine has to be built for battle. That’s why these Can-Am X3 fender flares are built with 1/8” thick HDPE. They can take constant beatings from rocks and debris without breaking a sweat. Plus, we designed them to follow the curves of your X3, so they look like they’ve always been part of your machine.
 

Special Order: 2-4 weeks delivery

Features

  • Made of extremely durable 1/8” LDPE (low-density polyethylene)
  • Adds up to an additional 4” of protection on each side
  • Protects against rocks, dirt, mud, sand, and other debris
  • Mounts to OEM fender flares for a sleek, low-profile look
  • Includes all hardware and instructions for easy installation

Take on Mud with Less Crud
Mud, slop, peanut butter—no matter what you call it, your Maverick eats it up. Next time you take on the bog, shield yourself from some of the inevitable junk your tires kick up. SuperATV’s Can-Am Maverick Trail Low Profile Fender Flares extend your existing fender flares by up to 4” to block the worst of the crud. Plus, they add a rugged look that only makes your rig look more badass. That’s a win-win if we’ve ever heard one.

Extended Fender Flares That Are Built to Last
These 1/8” HDPE plastic fender flares are tough enough to handle hard hits. With machined aluminum chamfered washers and countersunk bolts to secure it, you can ride just as hard as you always do without worrying about ripping them off. Plus, they’re built to match the profile of your stock flares so they look built in and fit easily.

Fender Flare Extensions Made For You
Don’t sacrifice style for protection when SuperATV gives you both. These Can-Am fender flares stick out from the crowd with the wide design and stylish black plastic. The additional coverage keeps you clean while your buddies are covered in mud. And everyone will be able to appreciate your Can-Am Maverick.

29 Reviews Hide Reviews Show Reviews

  • Can I purchase any one section of your fender guards

    5

    Review by Thomas jones on October 3rd, 2022

    I have my front right bottom guard broken

  • Fit perfect - Parfait

    5

    Review by Benoit Gagnon on August 8th, 2022

    Well built, it just replace orginal one. Installed in 10 minutes. Solide, remplace les orginaux. Installé en 10 minutes.

  • Super ATV Fender Flares

    1

    Review by Devin Parada on July 12th, 2022

    Package arrived (quick as usual) but upon opening the box the flares near looked used so dusty n grubby looking. They were not marked or scratched so all was fine. I did notice no installation screws or instructions/template for drilling. I can the instructions on line I suppose. I called your team to ask about the missing installation hardware and they told me I use my old… this will not work as I have none. I have to install these onto the current fender (mark and drill, only couple holes are pre drilled in the factory fender. I looked online at Super ATV and it is suppose to come with installation hardware. I’ve spent a lot of money with you guys and this was really the only bad experience where I couldn’t get help. I forgot to get the gentleman’s name I was talking to. Please send my the installation hardware at the very least. Thanks.

  • Fender flares

    5

    Review by Jonah on July 8th, 2022

    Perfect fit, easy to install and worked exactly as I expected.

  • Super atv / utv fender flares

    4

    Review by Raymond Stoyles on June 2nd, 2022

    Easy to install and does a nice job in decreasing the amount of mud splatter. Would recommend them for yamaha wolverines

  • Fender flares for RZR pro xp

    5

    Review by Unknown on May 24th, 2022

    These flares were very easy to put on and very good material. They help so much with the mud coming into the SXS. We love them and recommend them to all!

  • fender flairs

    5

    Review by richard christianson on May 21st, 2022

    These are just what I needed to cut down on after ride washdown. Time will tell if they hold up to tree branches, trees and such. Easy install, level 1

  • Super atv utv fender flare

    4

    Review by Bruno on April 11th, 2022

    Got the flare kit for a yamaha rmax4. very well made. it does the job. I have pretty no more mud getting in the cab. It will still spread mud on my doors but for me my main concern was myself and passenger free of mud and i think this kit is doing a good job to keep us clean. Honestly i wish the front flare would go 2-3 inch lower and the rear would need to come down too. forgot to mention i am on stock tire setup. if you go wider tire this is not the kit that you need.

  • Ordered the wrong ones

    3

    Review by Mel Shannon on April 1st, 2022

    Ordered the wrong one

Fast and free shipping
Fast and free shipping

To most locations on orders over $99.

EVERYDAY LOW PRICES
EVERYDAY LOW PRICES

Top brands, lowest prices.

#1 IN CUSTOMER SERVICE
#1 IN CUSTOMER SERVICE

Expert knowledge and outstanding service.